• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.7
• /
• pp.528-537
• /
• 2014

As the data traffic between ships and a land station continuously increase through the shipbuilding-IT convergence, several wireless communication technologies are being studied to process large amounts of data traffic. In particular, the multi-antenna system is one of the most expected technologies to provide high throughput. This paper proposes an algorithm for the base station to select the ship in consideration of channel characteristics and the transmission angle for a beam of the land station in spatial multiplexing marine communication systems. We increase the system capacity by maximizing the received signal strength of the ship using clustering characteristic of the radio channel. Also, we reduce the time to select the ship by excluding the ship with the large interference between the beams. On our computer simulation, the proposed scheme dramatically reduces the computational complexity with a little sacrifice of the throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.12
• /
• pp.1102-1112
• /
• 2012

We propose a cell selection and resource allocation scheme that assigns users to nearby accessible cells in heterogeneous wireless networks consisting of macrocell, femtocells, and Wi-Fi access points, under overload situation. Given the current power level of all accessible cells nearby users, the proposed scheme finds all possible cell assignment mappings of which user should connect to which cell to maximize the number of users that the network can accommodate at the same time. We formulate the cell selection problem with heterogeneous cells into an optimization problem of binary integer programming, and compute the optimal solution. We evaluate the proposed algorithm in terms of network access failure compared to a local ad-hoc based cell selection scheme used in practical systems using network level simulations. We demonstrate that our cell selection algorithm dramatically reduces network access failure in overload situation by fully leveraging network resources evenly across heterogeneous networks. We also validate the practical feasibility in terms of computational complexity of our binary integer program by measuring the computation time with respect to the number of users.

• International Journal of Contents
• /
• v.14 no.2
• /
• pp.1-6
• /
• 2018

In a wireless mobile communication system, a pilot signal has been considered to be a necessary signal for estimating a changing channel between a base station and a terminal. All mobile communication systems developed so far have a specification for transmitting pilot signals. However, although the pilot signal transmission is easy to estimate the channel,(Ed: unclear wording: it is easy to use the pilot signal transmission to estimate the channel?) it should be minimized because it uses radio resources for data transmission. In this paper, we propose a pilotless channel estimation scheme (PCE) by introducing the clustering method of unsupervised learning used in our deep learning into channel estimation.(Ed: highlight- unclear) The PCE estimates the channel using only the data symbols without using the pilot signal at all. Also, to apply PCE to a real system, we evaluated the performance of PCE based on the resource block (RB), which is a resource allocation unit used in LTE. According to the results of this study, the PCE always provides a better mean square error (MSE) performance than the least square estimator using pilots, although it does not use the pilot signal at all. The MSE performance of the PCE is affected by the number of data symbols used and the frequency selectivity of the channel. In this paper, we provide simulation results considering various effects(Ed: unclear, clarify).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6B
• /
• pp.593-600
• /
• 2002

The reverse link signal power required for multimedia traffic in multipath faded single-code (SC-) and multi-code CDMA (MC-CDMA) systems is investigated. The effect of orthogonality loss among multiple spreading code channels is herein characterized by the orthogonality factor. The required signal power in both the CDMA systems is then analyzed in terms of the relative required signal power ratio of data to voice traffic. The effect of varying system parameters including spreading bandwidth, the of orthogonality factor, and the number of spreading codes are examined. Analytical results show that MC-CDMA users transmitting only a single traffic type require significantly more power than SC-CDMA users with only a single traffic type. On the other hand, MC-CDMA users transmitting multimedia traffic require power levels approximately identical to SC-CDMA users with multimedia traffic. The results can be used in the design of radio resource management (e.g., power allocation) scheme for wireless multimedia services.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.1597-1600
• /
• 2000

현재의 무선 이동통신은 음성통화를 위주로 설계되어 사용되고 있다. 그러나 차츰 인터넷 접속과 같은 데이터 통신 요구가 증대되고 있으며, 특히 이미 가시화된 IMT-2000과 4세대 이동통신망이라 할 수 있는 ALL-IP 망에서는 동영상을 포함한 멀티미디어 서비스에 대한 욕구를 수용하기 위한 연구가 활발히 진행되고 있다. 본 논문에서는 유선 구간에 비해 자원의 제약이 큰 무선 구간에서의 효율적인 자원 할당을 위한 QoS(Qualify of Service) 협상자를 설계하였다. 협상의 전제가 될 수 있는 서비스 등급을 대역폭 할당의 가변 여부에 따라 세 등급으로 분류하였으며, 협상 에이전트는 이 정보들을 기반으로 요구 대역폭과 서비스 종류에 따라 협상을 통해 대역폭 할당량을 정의한다. 이에 따라 QoS 관리자가 적절한 자원을 할당하게 함으로써 전체적인 무선자원의 활용도를 높이도록 하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.712-714
• /
• 2012

D2D(Device-to-Device) 통신은 이동통신망을 기반으로 동작할 경우 이동통신망의 자원을 재사용함으로써 주파수 자원사용의 효율성을 높일 수 있다. 그러나 D2D 통신 단말(DUE; D2D user equipment)이 이동통신망의 자원을 재사용하는 경우 동일자원을 사용하는 이동통신개체와 DUE 간 및 D2D 통신 쌍 간에 신호 간섭이 발생할 수 있어 이를 고려한 자원할당기법에 대한 연구가 필요하다. 본 논문에서는 다수의 DUE가 이동통신망의 상향링크 자원을 다중으로 재사용할 때 이동통신개체 및 DUE가 달성가능 한 주파수 효율을 고려하여 DUE에게 자원을 할당함으로써 셀 수율을 향상시킬 수 있는 자원할당 기법을 제안한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.15-22
• /
• 2006

In OFDMA system, even if the number of allocated sub-channel in mobile station varies from one to the whole sub-channel as in base station, while because of mobile station's transmit power is lower than that of base station, therefore full loading range(FLR) constraint occurs where whole sub-channel can be used and the conventional open-loop power control scheme can not be used beyond FLR. We propose a new scheme that limits the maximum sub-channel allocation number and uses power concentration gain(PCG) depending on location of mobile station, which is based on ranging in OFDMA system. Simulation results show that the proposed scheme provides solutions for optimum utilization of radio resource depending on the location of mobile station and enables open-loop power control beyond FLR without extra hardware complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.729-736
• /
• 2005

In this paper, we introduce a new approach for the design of uplink sub-channel allocation and power control in the High-speed Portable Internet system that is based on OmMAnDD scheme. In OFDMA system, because the number of allocated sub-channel in mobile station varies from one to the whole sub-channel as in base station while mobile station's transmit power is lower than that of base station, full loading range(FLR) constraint occurs where whole sub-channel can be used and the conventional open-loop power control scheme can not be used beyond FLR. We propose a new scheme that limits the maximum sub-channel allocation number and uses power concentration gain(PCG) depending on location of mobile station, which is based on ranging in OfDMA system. Simulation results show that the proposed scheme extends the uplink coverage to the entire cell service coverage area, provides solutions for optimum utilization of radio resource and enables open-loop power control beyond FLR without extra hardware complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1B
• /
• pp.11-17
• /
• 2003

In this paper, we presented the dynamic random access channel allocation method under the priority based scheduling policy in order to improve the system performance of HIPERLAN/2 standardized by ETSI According to the scheduling policy, AP scheduler primarily allocates the resource to the collision MT This scheduling policy bring about decreasing the transmission delay of collision MT Dynamic RCH(random access channel) allocation method decreases the collision probability by increasing the number of RCH slots in case of low traffic. While it increases the maximum throughput by increasing the number of the data transmission slots in case of high traffic Therefore dynamic allocation method of RCH slots decreases the scheduling delay and increases the throughput When we evaluate the performance of presented method based on standards, we saw that the presented method improve the performance of the MAC protocol in terms of throughput and transmission delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12B
• /
• pp.1058-1067
• /
• 2006

In this paper, we propose a inband/outband broadcast method for hidden incumbent system detection of medium access control layer for wireless regional area network systems using cognitive radio technology. Through some extra channels that are not currently used, a short message is broadcasted. The message allows CPE detecting an appearance of incumbent system to send sensing report to CR BS. For the hidden incumbent system report message, the BS needs a process or method for allocation of upstream resource to CPEs. And transmitting multiple out-band signals has a possibility to collide with out-band signals of other co-located WRAN BSs. To avoid out-band signal collision, BSs randomly select it out-band signal broadcasting time within the pre-defined explicit out-band signaling, period. And fractional Bandwidth Usage allows WRAN BSs to efficiently use bandwidth.