• Current Optics and Photonics
• /
• v.3 no.4
• /
• pp.311-319
• /
• 2019

A hybrid free-space-optical/radio-frequency (FSO/RF) communication system is considered, with the help of amplify-and-forward (AF) relaying. We consider various weather conditions to investigate their effects on the system's performance. We begin by obtaining the cumulative distribution function and probability density function of the end-to-end signal-to-noise ratio for the AF dual-hop FSO communication system with RF backup link. Then, these results are used to derive closed-form expressions for the outage probability, average bit-error rate, and average ergodic capacity. The results show that the considered system efficiently employs the complementary nature of FSO and RF links, resulting in impressive performance improvements compared to non-hybrid systems.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.4
• /
• pp.367-378
• /
• 2020

This paper introduces the development of the iterative multiple signal classification (MUSIC)-based direction-of-arrival (DOA) estimation system using a rotator that can control the direction of antenna for the global navigation satellite system (GNSS) interference. The system calculates the spatial spectrum according to the noise eigenvector of all dimensions to measure the number of signals (NOS). Also, to detect the false peak, the system adjusts the array antenna's direction and checks the change's peak angles. The phase delay and gain correction values for system calibration are calculated in consideration of the chamber's structure and the characteristics of radio waves. The developed system estimated DOAs of interferences located about 1km away. The field test results show that the developed system can estimate the DOA without NOS information and detect the false peak even though the inter-element spacing is longer than the half-wavelength of the interference.

• ETRI Journal
• /
• v.45 no.2
• /
• pp.226-239
• /
• 2023

Challenges in cognitive radio and tactical communications include recognizing anonymously received signals and estimating parameters in a blind or semi-blind manner. In this paper, we examine this issue for orthogonal frequency division multiplexing (OFDM) signaling. There are several parameters in OFDM signaling, and the blind receiver must extract and consider the synchronization issue. We assume that the blind receiver is aware of modulation type, OFDM, and not aware of chip duration and the length of cyclic prefix. First, we present new criteria based on kurtosis to estimate these parameters and compare their performance at different levels of additive white Gaussian noise with methods based on correlation, kurtosis, maximum likelihood, and matched filter. Then, we perform synchronization and estimate the start time based on these criteria and several new criteria in two steps: fine and coarse synchronization. Finally, in a more practical setup, we present the idea of jointly estimating the mentioned parameters and the signal start time as coarse synchronization. We compare different criteria and show that one of the proposed criteria has the highest efficiency.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.3
• /
• pp.413-419
• /
• 1987

In this paper, self-oscillating mixer is designed by small signal S-parameter and series feedback circuit. The input-output matching circuit is accomplished from double stub and additional matching stub. The self-oscillating mixer is oscillating itself and amplifies without any external local oscillator and an intermediate frequency amplifier, so it has advantages in its economical and system simplification. The experimental results show the maximum conversion gain 1.5d B and the noise figure 6.5d B at RF center frequency 4GHz and IF 1.1GHz` output oscillating power 4d Bm, efficiency 13.4%, stability -10MHz/V and -0.5MHz/\ulcornerC at oscillating frequency 5.1GHz.The rejection band loss characteristics in band pass filter and low pass filter are -40d B and -30d B, respectively.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.3
• /
• pp.370-375
• /
• 1987

In this study, the Rayleigh fast fading simualtors encountered in channel modelling of mobile radio have been implemented and evaluated. Two models used for the fading environment were frequency composition of phase modulated signals and shaping spectrum of noise sources with filters. The spectrum chosen for our purpose is appropriate to an omnidirectional antenna. From results of the experiment with various parameters, we have obtained satisfying results which are closely agreed to theoretical values.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2021.06a
• /
• pp.260-263
• /
• 2021

3GPP (3rd generation partnership project)는 5G 요구 조건을 충족시키기 위해 release 16 에서 FeMBMS (further evolved MBMS)를 LTE 기반 5G MBMS 로 개선하였다. 이어서, 현재 개발 중인 release 17 에서 NR 기반의 디지털 방송을 위한 NR MBS (multimedia broadcast services)가 논의되고 있다. 본 논문에서는 LTE (long term evolution) 기반 5G MBMS (fifth generation multimedia broadcast & multicast services)와 5G NR (fifth generation new radio)의 PBCH (physical broadcast channel) 에 대한 송수신기 구조를 설명하고, 성능을 평가한다. 본 논문에서는 가산 백색 가우시안 잡음(additive white Gaussian noise: AWGN) 및 고정 환경 하에서 LTE 기반 5G MBMS 와 5G NR 에 대한 PBCH 의 성능을 비교한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1005-1015
• /
• 2000

In this paper, the performance of Hybrid CDU MFSK system has been analyzed in the environment that narrowband Class-A impulsive noise include Gaussian noise in wireless communication channel and Nakagami fading. The performance of system improved to adopting both of technique MRC diversity and BCH channel coding. The results show that there is substantial degraded in Hybrid CDMA system performance by impulse index is stronger and the fading index is smaller. But also improvement can be obtained when BCH coding techniques are adopted. Additional MRC diversity techniques is more improvement than BCH coding techniques when degraded environment with the low fading index. But BCH coding techniques is more improvement than MRC diversity techniques when fading index has been increased. The Hybrid CDMA MFSK system is incomplete to voice communication standard BER$(10^{-3})$ in Rayleigh fading by independent each adopting techniques BCH coding and MRC diversity. But it's satisfy(improvement can be obtained) to voice communication standard BER in strong impulse noise(24dB over) by adopting techniques BCH coding and MRC diversity at a time. Additional it's a substantial enhancement $(10^{-3})$satisfaction) in fading index (m=3, 22dB) in addition to strong impulse noise and 24dB over with data service standard $(10^{-5})$ BER satisfaction. This result show that there is error performance improved by diversity branch and coding advantage.

• ETRI Journal
• /
• v.26 no.3
• /
• pp.229-240
• /
• 2004

This paper reports on our development of a dual-mode transceiver for a CMOS high-rate Bluetooth system-onchip solution. The transceiver includes most of the radio building blocks such as an active complex filter, a Gaussian frequency shift keying (GFSK) demodulator, a variable gain amplifier (VGA), a dc offset cancellation circuit, a quadrature local oscillator (LO) generator, and an RF front-end. It is designed for both the normal-rate Bluetooth with an instantaneous bit rate of 1 Mb/s and the high-rate Bluetooth of up to 12 Mb/s. The receiver employs a dualconversion combined with a baseband dual-path architecture for resolving many problems such as flicker noise, dc offset, and power consumption of the dual-mode system. The transceiver requires none of the external image-rejection and intermediate frequency (IF) channel filters by using an LO of 1.6 GHz and the fifth order onchip filters. The chip is fabricated on a $6.5-mm^{2}$ die using a standard $0.25-{\mu}m$ CMOS technology. Experimental results show an in-band image-rejection ratio of 40 dB, an IIP3 of -5 dBm, and a sensitivity of -77 dBm for the Bluetooth mode when the losses from the external components are compensated. It consumes 42 mA in receive ${\pi}/4-diffrential$ quadrature phase-shift keying $({\pi}/4-DQPSK)$ mode of 8 Mb/s, 35 mA in receive GFSK mode of 1 Mb/s, and 32 mA in transmit mode from a 2.5-V supply. These results indicate that the architecture and circuits are adaptable to the implementation of a low-cost, multi-mode, high-speed wireless personal area network.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.890-910
• /
• 2014

This paper investigates the spectrum hole utilization of cooperative schemes for the two-way relaying model in order to improve the utilization efficiency of limited spectrum holes in cognitive radio networks with imperfect spectrum sensing. We propose two specific bidirectional secondary data transmission (BSDT) schemes with two-step and three-step two-way relaying models, i.e., two-BSDT and three-BSDT schemes, where the spectrum sensing and the secondary data transmission are jointly designed. In the proposed cooperative schemes, the best two-way relay channel between two secondary users is selected from a group of secondary users serving as cognitive relays and assists the bi-directional communication between the two secondary users without a direct link. The closed-form asymptotic expressions for outage probabilities of the two schemes are derived with a primary user protection constraint over Rayleigh fading channels. Based on the derived outage probabilities, the spectrum hole utilization is calculated to evaluate the percentage of spectrum holes used by the two secondary users for their successful information exchange without channel outage. Numerical results show that the spectrum hole utilization depends on the spectrum sensing overhead and the channel gain from a primary user to secondary users. Additionally, we compare the spectrum hole utilization of the two schemes as the varying of secondary signal to noise ratio, the number of cognitive relays, and symmetric and asymmetric channels.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.2
• /
• pp.15-21
• /
• 2007

In this paper, we propose a technique of a practical symbol acquisition and tracking using a low complex ADC and simple digital circuits for noncoherent asynchronous impulse-radio-based Ultra Wideband (IR-UWB) receiver based on energy detection. Compared to previous approaches of detecting an exact acquisition time that require much hardware resource, the proposed technique is to detect the target symbol by finding the symbol acquisition interval per symbol with a target symbo, thus the complexity of the complete signal processing and power consumption by ADC are reduced. To do this, we define the bit decision window (BDW) and analyze the relation between SNR, hardware resource, size of BDW and BER(Bit Error Rate). Using the results, the optimum BDW size for the minimum BER with limited hardware resource is selected. The proposed synchronization technique is verified with an aid of a simulator programmed by considering practical impulse channels.