• 제목/요약/키워드: radio map

검색결과 120건 처리시간 0.023초

TIMES: mapping Turbulent properties In star-forming MolEcular clouds down to the Sonic scale. I. the first result.

  • Yun, Hyeong-Sik;Lee, Jeong-Eun;Choi, Yunhee;Evans, Neal J. II;Offner, Stella S.R.;Lee, Yong-Hee;Baek, Giseon;Choi, Minho;Kang, Hyunwoo;Lee, Seokho;Tatematsu, Ken'ichi;Heyer, Mark H.;Gaches, Brandt A.L.;Yang, Yao-Lun;Jung, Jae Hoon;Lee, Changhoon
    • 천문학회보
    • /
    • 제44권1호
    • /
    • pp.42.2-42.2
    • /
    • 2019
  • Turbulence is one of the natural phenomena in molecular clouds. It affects gas density and velocity fluctuation within the molecular clouds and controls the mode and tempo of star formation. However, despite many years of study, the properties of turbulence remain poorly understood. As part of the Taeduk Radio Astronomy Observatory (TRAO) Key Science Program (KSP), "mapping Turbulent properties In star-forming MolEcular clouds down to the Sonic scale (TIMES; PI: Jeong-Eun Lee)", we have fully mapped two star-forming molecular clouds, the Orion A and the Ophiuchus molecular clouds, in 3 sets of lines ($^{13}CO$ J=1-0, $C^{18}O$ J=1-0, HCN J=1-0, $HCO^+$ J=1-0, CS J=2-1, and $N_2H^+$ J=1-0) using the TRAO 14-m telescope. We apply a statistical analysis, Principal Component Analysis (PCA), which can recover an underlying turbulent-power spectrum from an observed P-P-V spectral map. We compare turbulence properties not only between the two clouds, but also between different parts within each cloud. We present the first result of our observation program.

  • PDF

발전기의 전자기장 분포 특성에 따른 작업자 노출공간 분석 (Analysis of Worker Exposure Space according to Distribution of Electromagnetic Field of Generator)

  • 성민영;김두현;김승태
    • 한국안전학회지
    • /
    • 제36권4호
    • /
    • pp.20-28
    • /
    • 2021
  • With an increase in the commercialization of electricity, and the development of advanced and large electric devices and various wireless radio wave services, concerns over the effects of electromagnetic fields on human health have increased. Accordingly, the World Health Organization encouraged the development of international standards by establishing the 'International Electromagnetic Fields Project' in 1996 based on studies on the harmful effects of electromagnetic fields on the human body. Moreover, the National Institute of Environmental Health Sciences (NIEHS) classified electromagnetic fields as possible carcinogens under Group 2B category, even though they have been found to have a weak correlation with those effects on human health. Mid-to-large-sized electric facilities used at industrial sites mostly adopt a commercial frequency of 60 Hz, and workers handling these facilities are exposed to such extremely low frequency (ELF) fields for a long time. A previous study suggested that exposure to ELF electromagnetic fields with frequency ranges from 0 to 300 Hz, even for a short time, at densities higher than 100 μT may have harmful effects on human body as it affects the activation of nerve cells in the central nervous system by inducing an electric field and current and stimulating muscles and the nervous system in the body. Such studies, however, focused on home appliances used by ordinary people, and research on facilities utilizing high-capacity current and operated by workers at industrial sites is lacking. Therefore, in this study, a 3000 kilowatt generator, which is a high-capacity electric facility employed at industrial sites, was investigated, and the size of the magnetic fields generated during its no-load and high-load operations per distance to produce a map was measured to reveal spots deemed hazardous according to domestic and international exposure standards. The findings of this study is expected to alleviate workers' anxiety about the harmful effects of magnetic fields on their body and to minimize the level of exposure during operations.

Unauthorized person tracking system in video using CNN-LSTM based location positioning

  • Park, Chan;Kim, Hyungju;Moon, Nammee
    • 한국컴퓨터정보학회논문지
    • /
    • 제26권12호
    • /
    • pp.77-84
    • /
    • 2021
  • 본 논문에서는 영상 데이터, 비콘 데이터의 결합을 통해 집단시설에서 출입이 허용된 승인자와 비승인자를 구분하는 시스템을 제안한다. IP 카메라를 통해 수집된 영상 데이터는 YOLOv4를 사용하여 사람 객체를 추출하고, 애플리케이션을 통해 비콘의 신호 데이터(UUID, RSSI)를 수집하여 핑거프린팅 기반의 라디오 맵을 구성한다. 비콘은 신호의 불안전성을 보완해 위치 파악의 정확도를 향상하기 위하여 CNN-LSTM 기반의 학습을 진행한 후 사용자 위치 데이터를 추출한다. 이후 도출된 위치 데이터와 사람 객체가 추출된 영상 데이터를 매핑해 실시간으로 비승인자를 추적한다. 본 논문의 결과로 93.47%의 정확도를 보였으며, 향후 코로나19로 사용이 증가한 QR코드 등의 출입 인증 절차와 융합해 인증 절차를 거치지 않은 사람을 추적하는 확장성까지 기대할 수 있다.

진단용 초음파 변형률 영상에서 전역 균일 신장에 의한 콘트라스트 향상 (Contrast Improvement in Diagnostic Ultrasound Strain Imaging Using Globally Uniform Stretching)

  • 권성재;정목근
    • 한국음향학회지
    • /
    • 제29권8호
    • /
    • pp.504-508
    • /
    • 2010
  • 기존의 초음파 의료용 탄성영상에서 변형률 영상을 모니터에 표시할 때 인간 시각 특성을 반영하여 단단한 부위는 어둡게 표시하고 무를수록 밝게 나타낸다. 따라서 종양이나 암이 존재하는 단단한 부위는 어둡게 나타나서 병변 내부의 콘트라스트는 저하되어 나타난다. 병변 영역은 단단하여 변형률 영상에서 어둡게 나타나므로 병변 내부를 좀 더 자세히 진단하는 방법으로, 누른 후의 신호를 누른 변형률만큼 다시 신장시켜서 얻는 전역 균일 신장 방법을 적용하여 영상의 명암을 반전시킴으로써 병변 부분의 콘트라스트를 올리는 방법을 제안하였다. 의료용 초음파 영상 진단기를 이용하여 탄성 모사 팬텀에서 초음파 데이터를 얻어서 제안한 알고리즘을 검증하여 유용성을 확인하였다. 전역 균일 신장 없이 회색조 컬러 맵을 반전해서 얻은 변형률 영상법에 비해 콘트라스트 대 잡음비가 최대 1.8배 정도 향상되었다.

3G 방송망에서의 효율적인 멀티미디어 전송을 위한 유틸리티 기반 하이브라드 에러 복구기법 (A Utility-Based Hybrid Error Recovery Scheme for Multimedia Transmission over 3G Cellular Broadcast Networks)

  • 강경태;조용진;조용우;조진성;신현식
    • 한국정보과학회논문지:정보통신
    • /
    • 제33권4호
    • /
    • pp.333-342
    • /
    • 2006
  • cdma2000 lxEV - DO 이동통신 시스템은 멀티미디어 데이타 전송에 대한 요구 증가를 수용하기 위하여 브로드캐스트와 멀티캐스트 서비스 (BCMCS)를 제공한다. 이러한 데이타 브로드캐스트 서비스를 제공하기 위해서는 무선 전송 채널의 특성 즉 유선에 비해서 에러 발생 빈도가 높고 신뢰성이 떨어진 다는 사실을 고려해야 한다. 따라서 전송 에러의 복구를 위해 MAC 계층에서 순방향 에러 교정 (FEC: Forward Error Correction)을 사용하며, BCMCS 에서는 순방향 에러 교정을 위해 리드-솔로몬 (Reed - Solomon) 코팅을 사용한다. 본 논문에서는 먼저 리드 솔로몬 코딩의 성능을 분석하였고, 그 결과 이 방식이 천천히 움직이는 모바일 노드에 대해 취약함을 확인하였다. 따라서 이러한 점을 해결하고 에러 복구 성능을 향상시켜서 MPEG-4 FGS 비디오의 재생 품질을 개선하기 위하여 리드-솔로몬 코딩과 재전송 방법을 혼용한 하이브리드 방식의 에러 복구 기법을 제안하였다. 이는 리드-솔로몬의 코딩 오버헤드를 줄이는 대신, 그 결과로 얻어진 전송 슬롯을 활용하는 방법이다. 이렇게 얻어진 전송 슬롯은 제한적이기 때문에 활용도가 큰 패킷을 우선적으로 재전송 할 필요가 있다. 이를 위해 유틸리티 함수를 제안하였으며, 함수 값은 각 모바일 노드의 에러 제어 블록 (ECB: Error Control Block)을 이용해서 계산할 수 있다. 또한 하이브리드 방식의 에러 복구 기법은 MPEG-4 FGS의 특정을 활용하며, 이를 통해 채널의 상태가 불리할 경우는 물론 그렇지 않은 경우에 대해서도 비디오의 평균 재생 품질을 크게 향상시킬 수 있다.

압축된 영상에서 정규화 된 역양자화기의 응용 (Applications of Regularized Dequantizers for Compressed Images)

  • 이건호;성주승;송문호
    • 전자공학회논문지CI
    • /
    • 제39권5호
    • /
    • pp.11-20
    • /
    • 2002
  • 이 논문에서 우리는 블록화 현상과 DCT 계수의 양자화 에러를 최소화 하면서 영상을 복호하는 새로운 기술을 제안한다. 영상의 복호화 과정에서 영상의 DCT 계수는 양자화 된 DCT 계수와 양자화 행렬의 곱으로 구해지게 되고, 양자화 간격의 절반 크기의 에러가 유도 될 수 있다. 이때 역 양자화 과정에서 원 영상의 DCT 계수는 알 수 없으며, 만약 DCT 계수를 양자화 간격 절반 크기 내로 대응 시킨다면 무한개의 해답이 존재하게 된다. 이 논문에서 우리는 하나의 해답을 구하기 위한 단서로, 양자화 에러는 양자화 간격의 절반 크기 내로 제한되어 있으며, 적어도 블록 경계면에서의 불연속성으로 나타나는 고주파 성분은 원 영상에 존재하지 않는다는 사실을 이용하게 된다. 이 두 가지 조건으로 우리는 역 양자화기의 정규화 과정을 거치게 된다. 정규화 된 역 양자화기는 역 양자화 과정에서 얻어지는 DCT 계수를 항상 양자화 에러, 즉 양자화 간격의 절반 크기 범위 내로 대응 시키게 된다. 논문에서 제안된 기술은 JPEG, MPEG-1, H.263+의 영상 압축 표준과 비교하였으며, 비교과정은 시각적인 효과로 기존의 일반적인 방법으로 영상을 복호할 때보다 블록화 현상이 감소한다는 것을 보여주게 되고 또한 원 영상과의 Peak Signal to Noise Ratio (PSNR), Blockiness Measure (BM)에 대한 수치적인 비교 결과를 보여주게 된다.

산악 조난자의 위치추정을 위한 이동성 모델 및 조난 시뮬레이터 (Hiker Mobility Model and Mountain Distress Simulator for Location Estimation of Mountain Distress Victim)

  • 김한솔;조용규;조창혁
    • 한국시뮬레이션학회논문지
    • /
    • 제31권3호
    • /
    • pp.55-61
    • /
    • 2022
  • 현재 경찰과 소방이 범죄신고, 긴급출동과 같은 구조 상황발생 시 통화권영역 내에서는 이동통신 사업자가 구축한 네트워크,와이파이,GPS기반의 긴급 구조용 측위시스템을 활용하여 요구조자의 단말과 직접 연동하여 예상위치를 정밀 측위를 하고 있다. 그러나 산악구조의 경우 조난자가 산악지형의 음영지역에 위치하거나 단말의 방전(power off) 시에는 단말과 직접 연동하여 정밀 측위가 불가능하며 마지막 접속 기지국 정보만을 받고 있어 수색의 위치를 한정할 수 없으므로 구조 골든타임 확보가 어려운 상황이다. 본 논문에서는 개선방안으로 시계열 기지국 정보, 위치정보 및 조난자의 성별, 나이, 행동적 특성을 반영한 이동성 모델과 지능형 추론을 기반으로 하는 전파분석 및 위치추정 시뮬레이션과 같은 이동통신 포렌식 기술을 통해 조난자의 예상 위치정보의 확률에 따른 히트맵 방식의 시각화를 통해 위치정보의 정확성을 높여 소방, 수색대의 수색지역을 축소하여 신속하고 정확한 인명구조에 기여할 수 있기를 기대한다.

APPLICATION OF WIFI-BASED INDOOR LOCATION MONITORING SYSTEM FOR LABOR TRACKING IN CONSTRUCTION SITE - A CASE STUDY in Guangzhou MTR

  • Sunkyu Woo;Seongsu Jeong;Esmond Mok;Linyuan Xia;Muwook Pyeon;Joon Heo
    • 국제학술발표논문집
    • /
    • The 3th International Conference on Construction Engineering and Project Management
    • /
    • pp.869-875
    • /
    • 2009
  • Safety is a big issue in the construction sites. For safe and secure management, tracking locations of construction resources such as labors, materials, machineries, vehicles and so on is important. The materials, machineries and vehicles could be controlled by computer, whereas the movement of labors does not have fixed pattern. So, the location and movement of labors need to be monitored continuously for safety. In general, Global Positioning System(GPS) is an opt solution to obtain the location information in outside environments. But it cannot be used for indoor locations as it requires a clear Line-Of-Sight(LOS) to satellites Therefore, indoor location monitoring system could be a convenient alternative for environments such as tunnel and indoor building construction sites. This paper presents a case study to investigate feasibility of Wi-Fi based indoor location monitoring system in construction site. The system is developed by using fingerprint map of gathering Received Signal Strength Indication(RSSI) from each Access Point(AP). The signal information is gathered by Radio Frequency Identification (RFID) tags, which are attached on a helmet of labors to track their locations, and is sent to server computer. Experiments were conducted in a shield tunnel construction site at Guangzhou, China. This study consists of three phases as follows: First, we have a tracking test in entrance area of tunnel construction site. This experiment was performed to find the effective geometry of APs installation. The geometry of APs installation was changed for finding effective locations, and the experiment was performed using one and more tags. Second, APs were separated into two groups, and they were connected with LAN cable in tunnel construction site. The purpose of this experiment was to check the validity of group separating strategy. One group was installed around the entrance and the other one was installed inside the tunnel. Finally, we installed the system inner area of tunnel, boring machine area, and checked the performance with varying conditions (the presence of obstacles such as train, worker, and so on). Accuracy of this study was calculated from the data, which was collected at some known points. Experimental results showed that WiFi-based indoor location system has a level of accuracy of a few meters in tunnel construction site. From the results, it is inferred that the location tracking system can track the approximate location of labors in the construction site. It is able to alert the labors when they are closer to dangerous zones like poisonous region or cave-in..

  • PDF

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF

스마트 폰 기반 Self-Tour 서비스 기술 연구 (Self-Tour Service Technology based on a Smartphone)

  • 배경율
    • 지능정보연구
    • /
    • 제16권4호
    • /
    • pp.147-157
    • /
    • 2010
  • 아이폰의 등장과 함께 스마트 폰에 대한 관심이 높아지고, 통신사업자를 통해야만 가능했던 다양한 서비스가 스마트 폰을 통해서 직접 제공할 수 있는 환경이 가능해졌다. 전세계적으로 해외 관광객이 증가하면서 관광가이드 없이 자신의 노력으로 여행을 다니는 개인관광객도 증가하고 있다. 그러나 우리나라를 방문하는 외국인들이 개인적으로 여행을 즐기기에는 언어소통이나 제공되는 정보의 부족으로 어려움을 느끼고 있다. 본 연구에서는 스마트 폰이 탑재하고 있는 GPS와 WiFi 또는 3G 무선망을 통해서 사전에 설정된 관광 정보 카테고리에 따라서 관광객의 위치에 따른 관련 정보를 자동으로 제공함으로써 관광객의 편의성을 높이는 서비스 기술을 개발하였다. 개발된 서비스는 인사동을 대상으로 시험하였으며, 사용자의 선택과 같은 불편함 없이 주변정보를 제공함으로써 관광에 대한 편의성을 최대한 높였다.