• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.213-219
• /
• 2013

Recently, with the rapid advancement in information and communication technology, indoor location-based services(LBSs) that require precise position tracking have been actively studied with outdoor-LBS using GPS. However, in case of a ship which consists of steel structure, it is difficult to measure a precise localization due to significant ranging error by the diffraction and refraction of radio waves. In order to reduce location measurement errors that occur in these indoor environments, this paper presents distance compensation algorithms that are suitable for a narrow passage such as ship corridors without any additional sensors by using UWB(Ultra-wide-band), which is robust to multi-path and has an error in the range of a few centimeters in free space. These improvement methods are that Pythagorean theory and adjacent node technique are used to solve the distance error due to the node deployment and distance variation analysis technique is applied to reduce the ranging errors which are significantly fluctuated in the corner section. The experimental results show that the number of nodes and the distance error are reduced to 66% and 57.41%, respectively, compared with conventional CSS(Chirp spread spectrum) method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.10
• /
• pp.899-905
• /
• 2016

Wireless access in vehicle environment (WAVE) communication is currently being researched as core wireless communication technologies for cooperative intelligent transport systems (C-ITS). WAVE consists of both vehicle to vehicle (V2V) communication, which refers to communication between vehicles, and vehicle to infrastructure (V2I) communication, which refers to the communication between vehicles and road-side stations. V2I has a longer communication range than V2V, and its communication range and reception rate are heavily influenced by various factors such as structures on the road, the density of vehicles, and topography. Therefore, domestic environments in which there are many non-lines of sight (NLOS), such as mountains and urban areas, require optimized communication channel modeling based on research of V2I propagation characteristics. In the present study, the received signal strength indicator (RSSI) was measured on both an experience road and a test road, and the large-scale characteristics of the WAVE communication were analyzed using the data collected to assess the propagation environment of the WAVE-based V2I that is actually implemented on highways. Based on the results of this analysis, this paper proposes a WAVE communication channel model for domestic public roads by deriving the parameters of a dual-slope logarithmic distance implementing a two-ray ground-reflection model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1461-1472
• /
• 2000

Recently, the mobile users seem to be rapidly increasing and then the capacity limit will be reached at close hand. In these situations, to provide them with good quality of service in the coming future, newly planned cell design is needed. In the next generation mobile communication systems, namely IMT-2000, good quality services will be possible only by designing the cell structure hierarchically with the help of appropriate cell planning. In the research process, the standardization reports on the future mobile cellular IMT-2000 system (3GPP) are investigated and the parameters, that are essential to cell planning, are also researched. Modeling of IMT-2000 radio link and the numerical analysis on that make it possible to calculate the forward/reverse link budget, system capacity call blocking probability Erlang capacity and cell coverage. In planning the cell of IMT-2000 system, various parameters are considered, such as hierarchical cell structure, number of users, data service forms and propagation area environments. From the results, efficient cell planning methods are proposed. Through this thesis efficient cell planning and maximum capacity will be achieved in the beginning of commercial IMT-2000 service.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5C
• /
• pp.351-360
• /
• 2008

In cellular mobile radio systems with frequency reuse, the interference signals degrade the channel estimation and signal detection performance due to the low signal-to-interference ratio near coverage boundaries. When the preamble pilot sequences from different cells are orthogonal or located in disjointed positions, they can be used for multi-cell channel estimation and interference cancellation. In time-varying channels caused by Doppler spread, data pilot symbols are needed for channel estimations. However, data pilot symbols are usually located in identical positions for the overhead reduction, which degrades the channel estimation performance. In this paper, we demonstrate a significant amount of performance improvement is achieved by multiplying different pseudonoise(PN) sequences to the data pilot symbols from adjacent interference cells. In particular, for detection scheme using maximal ratio combining(MRC) and inter-cell spatial demultiplexing(ISD), quantitative performance gain of spectral efficiency for different values of Doppler frequency and interference power is presented.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.3
• /
• pp.15-23
• /
• 1995

The antenna height of the mobile communications lower than its typical surroundings causes multipath fading usually resulting in fast fluctuations of both signal strength and wave length in mobile radio communications. Therefore, there have been developed and used various wave be- havior prediction models, in some other foreign countries, based on the measurement data rather than on theoretical derivation. The main purpose of this paper is to examine the wave propagation characteristics particularly in Korean terrain with the measurements made in four types of different areas - a large city area, a small city area, a flat terrain area, and a mountain area. Those areas have been classified according to the terrain characteristics with which the particular area contains, such as scale and number of buildings, highways, trees, and so on. With the measured data of the field strength in the frequency band of pager system obtained from those four different areas, we compared the calculated ones from both Hata's and TIREM prediction models which are often applied in Korea.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.3
• /
• pp.321-330
• /
• 2010

In this paper, the theoretical background and the specific implementation method of a compressive receiver for RFID signal detection as well as the design method of DDL(Dispersive Delay Line) and chirp LO are described. DDL, which is one of the main components of the compressive receiver, is designed to have $13{\mu}s$ dispersive delay time and 6 MHz bandwidth using the SAW technique based on $LiNbO_3$ material. The chirp LO is designed using DDS(Direct Digital Synthesizer). Also the compressive receiver is fabricated to be installed into the RFID reader. Test results show the maximum frequency error of 25 kHz for single signal input, the receiver sensitivity of -44 dBm, and the maximum frequency error is 75 kHz for 6 multi-tone input signals. These results indicate that the fabricated compressive receiver is working well even in dense RFID operating environments.

• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.865-868
• /
• 2007

Recently, wireless LANs are often applied in home or office because of its various of convenience. Frequency range of wireless LANs specified by IEEE 802.11b is at 2.4 GHz. The bluetooth, the microwave oven, and the PDA(Personal Digital Assistants) uses, however, the same frequency band. So problems will be produced in these environments, such as multi-pass interference and system-to-system interference. These problems can be eliminated by using EM wave absorber. In this paper, we designed and fabricated EM wave absorber using MnZn-Ferrite, Sendust, and CPE( Chlorinated Polyethylene). The EM wave absorber with the ratio of material (MnZn-Ferrite : Sendust : CPE = 64 : 16 : 20 wt.%) has thickness of 3.7 mm and absorption ability more than 17 dB at 2.4 GHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.482-488
• /
• 2009

Mobile Ad-hoc Networks provide communication without a centralized infrastructure, which makes them suitable for communication in disaster areas or when quick deployment is needed. On the other hand, they are susceptible to malicious exploitation and have to face different challenges at different layers due to its open Ad-hoc network structure which lacks previous security measures. Denial of service (DoS) attack is one that interferes with the radio transmission channel causing a jamming attack. In this kind of attack, an attacker emits a signal that interrupts the energy of the packets causing many errors in the packet currently being transmitted. In harsh environments where there is constant traffic, a jamming attack causes serious problems; therefore measures to prevent these types of attacks are required. The objective of this paper is to carry out the simulation of the jamming attack on the nodes and determine the DoS attacks in OPNET so as to obtain better results. We have used effective anomaly detection system to detect the malicious behaviour of the jammer node and analyzed the results that deny channel access by jamming in the mobile Ad-hoc networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.598-604
• /
• 2004

The mobile service was focused on voice and low rate data service. But recently high data rate service is getting more important, so mobile service operators are providing 1x EV-DO services for high data rate service. Many mobile repeaters were deployed for service coverage, but most of them were deployed when voice and low rate data service were main service. It is necessary to test whether these repeaters are suitable for 1x EV-DO networks for high rate data services. In field test, 1x EV-DO data rates were measured through various repeaters. Some repeaters showed data rates degradation compared with 1x EV-DO AN. The specifications of the repeaters were analyzed. And under the various radio environments such as fading and RSSI, data rates through repeater were tested. These test results will be useful for operation guide of repeaters in high data rate service networks.

• The KIPS Transactions:PartC
• /
• v.9C no.5
• /
• pp.687-698
• /
• 2002

Together with the activation of wireless Internet, the interest for various integrated methods of the existing wired and wireless e-commerces is on the rise. For the integrated wired and wireless e-commerce, firstly, the optimized security and authentication under the radio communication environment should be decided. And also the user-friendly usage is important. In this paper, we designed and implemented wired and wireless interworking Mobile Wallet on terminal that can be used through both wired and wireless methods by developing electronic wallet module for electronic payment using MIDP (Mobile Information Device Profile) based on J2ME (Java 2 Micro Edition). The characteristics of mobile wallet implemented in this paper provide the stability through encoding/decoding payment information and on-line usage on wired/wireless environments through downloading electronic wallet. In addition, we also present safe and convenient payment method for e-commerce based on wired/wireless Internet.