• Nuclear Engineering and Technology
• /
• 제23권4호
• /
• pp.444-455
• /
• 1991

본 연구에서는 CANDU-PHWR 형 기존 및 개량 핵연료의 원통형 (soild) 및 환상형 소결체에 대하여, 그 핵연료 전 수명 기간동안, 반경방향 출력분포를 정확하고 신속하게 계산하는 NEDAR 모형을 개발하였다. 본 계산모형에는 핵연료소결체의 직경 범위 8.0-19.5 mm, 농축도 범위 0.71-6.0 wt % U-235이고, 계산 가능 연소도범위가 0-840 Mwh/kgU (35000MWD/T)인 한계내에서, 핵연료 반경방향 출력분포결자식 및 열중성자속감소 계산결과자료가 포함되어 있다. CAN-DU-PHWR 형 원자로 중성자속 스펙트럼을 입력자료로 하여, 로물리 전산코드, CE-HAMMER 를 이용하여 핵연료의 각 설계조건 및 소결체의 환별 국부지점에 대하여, 임의로 설정한 기준 연소시점에서 반경 방향 출력 분포를 계산하였다. 이 계산 결과를 토대로 각 환의 평균출력을 구하는 적분법 및 비선형 곡선희귀계산법에 의하여, Bessel 함수와 지수함수의 다항식으로 구성된 반경방향 출력분포 기본 결과식 및 그 계수들이 산출되었다. 본 연구에서 개발된 NEDAR 모형을 이용하여 산출한 반경방향출력분포값을, 핵연료소결체 표면에서의 값을 기본단위로 환산하여 비교하면, 본 의형에 의한 반경방향 출력분포 결과가 기존 ELESIM 전산코드의 결과에 비교하여 약간 높게 나타났다. 소결체의 반경방향의 출력 및 온도분포는 핵분열기체생성물방출과 밀접한 관계가 있으므로, 본 모형을 기존 ELESIM 전산코트의 반경방향 출력분포 계산 모형과 대체한 전산코트, 즉 KAFEPA-NEDAR에 의한 핵분열기체생 생성물방출량 예측치를 기존 ELESIM 전산코드의 예측치와 비교하였다. 여기서 KAFEPA-NEDAR리 예측치가 실험결과 자료에 보다 더 가깝게 접근하였다. 따라서, 본 연구에서 개 발된 NEDAR모형은 과대한 계산시간의 낭비없이 CANDU-PHWR 형 핵연료소결체의 반경방향출력분포를 효율적이고, 신속/정착하게 계산하는 모형임이 입증되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.341-346
• /
• 2001

The gun-type gas burner adopted in this study is generally composed of some slits and swirl vanes. Therefore, this paper is studied to investigate the effect of slits and swirl vanes on the turbulent flow fields in the horizontal plane of gas swirl burner with a cone type baffle plate measured by using X-probe from hot-wire anemometer system. This experiment is carried out at flow rate $450\;{\ell}/min$, which is equivalent to the combustion air flow rate necessary for heat release 15,000 kcal/hr in gas furnace, in the test section of subsonic wind tunnel. When the burner has only swirl vanes, the axial mean velocity component shows the characteristic that spreads more remarkably toward radial direction than axial one, but when it has only slits, that is developed spreading more toward axial direction than radial one. Therefore, because the biggest speed is spurted in slits and it derive main flow toward axial direction encircling rotational flow that comes out from swirl vane that is situated on the inside of slits, both slits and swirl vanes composing of cone type gas burner act role that decreases the speed near slits and increases the flow speed in the central part of a burner. Moreover, because rotational flow by swirl vanes and fast jet flow by slits increase turbulent intensities effectively coexisting, the turbulent kinetic energy is distributed with a bigger size fairly near slits than burner models which have only slit or swirl vanes within X/R<0.6410.

• 천문학논총
• /
• 제30권2호
• /
• pp.279-281
• /
• 2015

We adopt the PASTEL catalog combined with SIMBAD radial velocities as a testing standard to validate the stellar parameters (effective temperature $T_{eff}$, surface gravity log g, metallicity [Fe/H] and radial velocity $V_r$) from the first data release (DR1) of The Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) survey. After applying data reduction and temperature constraints to the sample obtained by cross-identification, we compare the stellar parameters from DR1 and PASTEL. The results show that the DR1 results are reliable under certain conditions. We derive a dispersion of 110 K, 0.19 dex, 0.11 dex and $4.91kms^{-1}$ in specified effective temperature ranges, for $T_{eff}$, log g, [Fe/H] and $V_r$ respectively. Systematic errors are negligible except for those of $V_r$. In addition, for stars with PASTEL [Fe/H] < -1:5, the metallicities in DR1 are systematically higher than those in PASTEL.

• Nuclear Engineering and Technology
• /
• 제35권4호
• /
• pp.356-368
• /
• 2003

Material properties such as coolant specific heat, film heat transfer coefficient, cladding thermal conductivity, surface diffusion coefficient of the multi-bubble are improved in MACSIS-Mod1. The axial power and flux profile module was also incorporated with irradiation history. The performance and feasibility of the updated driver fuel pin have been analyzed for nominal parameters based on the conceptual design for the KALIMER breakeven core by MACSIS-MOD1 code. The fuel slug centerline temperature takes the maximum at 700mm from the bottom of the slug in spite of the nearly symmetric axial power distribution. The cladding mid-wall and coolant temperatures take the maximum at the top of the pin. Temperature of the fuel slug surface over the entire irradiation life is much lower than the fuel-clad eutectic reaction temperature. The fission gas release of the driver fuel pin at the end of life is predicted to be $68.61\%$ and plenum pressure is too low to cause cladding yielding. The probability that the fuel pin would fail is estimated to be much less than that allowed in the design criteria. The maximum radial deformation of the fuel pin is $1.93\%$, satisfying the preliminary design criterion ($3\%$) for fuel pin deformation. Therefore the conceptual design parameters of the driver fuel pin for the KALIMER breakeven core are expected to satisfy the preliminary criteria on temperature, fluence limit, deformation limit etc.

• Geomechanics and Engineering
• /
• 제8권4호
• /
• pp.495-510
• /
• 2015

The applications of water jet cutting (WJC) in coal mine have progressed slowly. In this paper, we analyzed the possibility and reasonableness of WJC application to pressure relief in hard coal seam, simulated the distributive characteristics of stress and energy fields suffered by hard coal roadway wallrock and the internal relationships of the fields to the instability due to WJC (including horizontal radial slot and vertical annular slot) on roadway wallrock. The results showed that: (1) WJC can unload hard coal seam effectively by inducing stress release and energy dissipation in coal mass near its slots; its annular slots also can block or weaken stress and energy transfer in coal mass; (2) the two slots may cause "the beam structure" and "the small pillar skeleton", and "the layered energy reservoir structure", respectively, which lead to the increase in stress concentration and energy accumulation in coal element mass near the slots; (3) the reasonable design and optimization of slots' positions and their combination not only can significantly reduce the scope of stress concentration and energy accumulation, but also destroy coal mass structure on a larger scale to force stress to transfer deeper coal mass.

• 천문학회보
• /
• 제37권1호
• /
• pp.90.1-90.1
• /
• 2012

Understanding the dynamics of relativistic electron acceleration, loss, and transport in the Earth's radiation belt during magnetic storms is a challenging task. The U.S. National Science Foundation's Geospace Environment Modeling (GEM) has identified five magnetic storms for in-depth study that occurred during the second half of the Combined Release and Radiation Effects Satellite (CRRES) mission in the year 1991. In this study, we show the responses of relativistic radiation belt electrons to the magnetic storms by comparing the time-dependent 3-D Versatile Electron Radiation Belt (VERB) simulations with the CRRES MEA 1 MeV electron observations in order to investigate the relative roles of the competing effects of previously proposed scattering mechanisms at different storm phases, as well as to examine the extent to which the simulations can reproduce observations. The major scattering processes in our model are radial transport due to Ultra Low Frequency (ULF) electromagnetic fluctuations, pitch-angle and energy diffusion including mixed diffusion by whistler mode chorus waves outside the plasmasphere, and pitch-angle scattering by plasmaspheric hiss inside the plasmasphere. We provide a detailed description of simulations for each of the GEM storm events.

• 대한기계학회논문집A
• /
• 제21권10호
• /
• pp.1571-1579
• /
• 1997

The development of a new material which should be continuously use under severe environment of very high temperature has been urgently requested. For the development of such super-heat resistant materials, the main problem is not only to make the superior thermal barrier properties but also to actively release thermal stress. So, a new concept of functionally graded material(FGM) has been proposed to overcome this problem. A composition and microstructure of FGM are varied continuously from place to place in ways designed to provide it with the maximum function of mitigating the induced thermal stress. So, FGM can be applied in the aerospace, the electronic and the medical field, etc.. In this study, thermal stress analysis of sintering PSZ/NiCrAlY graded material was conducted theoretically using a finite-element program. The temperature condition was sintering temperature assuming a cooling-down process up to room temperature. Fracture damage mechanism was anlayzed by the parameters of residual stress. It could be known that FGM provided with the function of mitigating the induced thermal stress.

• 한국지반공학회논문집
• /
• 제20권6호
• /
• pp.5-10
• /
• 2004

일반적으로 일차원 압밀상태에 있는 정지토압계수 $K_0$값은 삼축시험에서 구해지지만, 압밀중의 간극수의 흐름이 방사류이고, 공시체의 변형이 3차원적이므로, 얻어진 값의 신뢰성에는 의문이 있다. 여기서는, 일차원 압밀시험기를 개량하여, 압밀링 중앙높이에 배치한 압밀링 요소를 토압감지부로 하며, 감지부 중앙에서는 간극수압을 측정하였다. 내경 6cm의 압밀링은 부동(浮動)링 형식으로 높이 4cm의 공시체 중앙높이가 항상 같은 위치를 유지하는 구조이다. 직경 6cm의 공시체와 샘플링후 시료변형을 고려한 압밀링 내경보다 직경이 약간 작은 공시체에서 얻은 압밀종료시의 $K_0$값은 공시체직경과 압밀압력에 상관없이 거의 0.5를 나타내었다.

• The Journal of Korean Physical Therapy
• /
• 제19권1호
• /
• pp.1-9
• /
• 2007

Purpose: Stenosing tenosynovitis is a stenosing condition of the sheath of the abductor pollicis longus and extensor pollicis brevis tendons at the radial styloid process. The purpose of this study was to investigate the effects of kinesio taping on the pain and grip power in patients with de Quervain's disease. Method: 20 female with de Quervain's disease was recruited. This procedure was performed with or without taping procedure. Pain levels were assessed using a visual analogue scale, and spherical and pinch grip powers were assessed using a dynamometer. Results: 1. Resting pain, Finkelstein test pain, and Tenderness using VAS scale was showed significantly reduced after taping application(p<0.01). 2. Spherical grip power using dynamometer was showed significantly increased after taping application(p<0.01). 3. Pinch grip power using dynamometer was showed significantly increased after taping application(p<0.01). Conclusion: So we thought that kinesio taping therapy had effects on the pain release and grip power increasing to the small or local muscle groups and joints.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1508-1515
• /
• 2022

In the present study, the cavity module of the MELCOR code is used for the simulation of molten corium concrete interaction (MCCI) during the late phase of postulated large break loss of coolant (LB-LOCA) accident in the APR1400 reactor design. Using the molten corium composition data from previous MELCOR Simulation of APR1400 under LB-LOCA accident, the ex-vessel phases of the accident sequences with long-term MCCI are recalculated with stand-alone cavity package of the MELCOR code to investigate the impact of water ingression and melt eruption models which were hitherto absent in MELCOR code. Significant changes in the MCCI behaviors in terms of the heat transfer rates, amount of gases released, and maximum cavity ablation depths are observed and reported in this study. Most especially, the incorporation of these models in the new release of MELCOR code has led to the reduction of the maximum ablation depth in radial and axial directions by ~38% and ~32%, respectively. These impacts are substantial enough to change the conclusions earlier reached by researchers who had used the older versions of the MELCOR code for their studies. and it could also impact the estimated cost of the severe accident mitigation system in the APR1400 reactor.