• 태양에너지
• /
• 제2권1호
• /
• pp.24-32
• /
• 1982

In this paper, temperature distributions in radial fin of rectangular profile for steady-state with no heat generation are obtained by one-dimensional analytical method, finite difference method and experiment respectively. Heat flow rate and fin efficiency from the fin model are obtained by analytical method. Consequently, temperature distributions in radial fin can certify that are similar to exact solution. From theoretical analysis, the effects according to heat flow rate and fin efficiency are related to variation of parameters which are fin thickness ${\delta}_o$, fin base temperature $T_o$, thermal conductivity K with same basic dimensions and the effects are studied and compared.

• 대한설비공학회지:설비저널
• /
• 제11권3호
• /
• pp.9-17
• /
• 1982

In this paper, temperature distributions in radial fin of hyperbolic profile for steady -state with no heat generation are obtained by one-dimensional analytical method, finite difference method and experiment respectively. Heat flow rate and fin efficiency from the fin model are obtained by analytical method. To compare the exact solutions obtained by theoretical analysis with the results obtained by finite difference method, cylindrical shape is selected. Particularly, equations of finite difference method for cylindrical shape with irregular boundary are rearranged and formulated. Consequently, temperature distributions in radial fin can certify that are similar to exact solutions. From theoretical analysis, the effects according to heat flow rate and fin efficiency are related to variation of parameters which are fin thickness ${\delta}_o$, fin base temperature $T_o$, thermal conductivity K with same basic dimensions and the fleets are studied and compared.

• Structural Engineering and Mechanics
• /
• 제15권5호
• /
• pp.535-550
• /
• 2003

In this paper, a boundary-type meshfree method, the boundary radial point interpolation method (BRPIM), is presented for solving boundary value problems of two-dimensional solid mechanics. In the BRPIM, the boundary of a problem domain is represented by a set of properly scattered nodes. A technique is proposed to construct shape functions using radial functions as basis functions. The shape functions so formulated are proven to possess both delta function property and partitions of unity property. Boundary conditions can be easily implemented as in the conventional Boundary Element Method (BEM). The Boundary Integral Equation (BIE) for 2-D elastostatics is discretized using the radial basis point interpolation. Some important parameters on the performance of the BRPIM are investigated thoroughly. Validity and efficiency of the present BRPIM are demonstrated through a number of numerical examples.

• 한국유체기계학회 논문집
• /
• 제19권1호
• /
• pp.37-44
• /
• 2016

In this study, a parametric study of a centrifugal pump with double volute has been performed numerically using three-dimensional Reynolds-averaged Navier-Stokes equations. The shear stress transport model was selected as turbulence closure through turbulence model test. The finite volume method and unstructured grid system were used for the numerical analysis. The optimal grid system in the computational domain was determined through a grid dependency test. The expansion coefficient, circumferential and radial starting positions and length of divider were selected as the geometric parameters to be tested. And, the hydraulic efficiency and the radial thrust coefficient were considered as performance parameters. It was found that the radial thrust and hydrualic efficiency are more sensitive to the expansion angle and circumferential starting position of the divider than the other geometrical parameters.

• Computers and Concrete
• /
• 제22권4호
• /
• pp.419-437
• /
• 2018

The compressive strength of self-compacting concrete (SCC) containing fly ash (FA) is highly related to its constituents. The principal purpose of this paper is to investigate the efficiency of hybrid fuzzy radial basis function neural network with biogeography-based optimization (FRBFNN-BBO) for predicting the compressive strength of SCC containing FA based on its mix design i.e., cement, fly ash, water, fine aggregate, coarse aggregate, superplasticizer, and age. In this regard, biogeography-based optimization (BBO) is applied for the optimal design of fuzzy radial basis function neural network (FRBFNN) and the proposed model, implemented in a MATLAB environment, is constructed, trained and tested using 338 available sets of data obtained from 24 different published literature sources. Moreover, the artificial neural network and three types of radial basis function neural network models are applied to compare the efficiency of the proposed model. The statistical analysis results strongly showed that the proposed FRBFNN-BBO model has good performance in desirable accuracy for predicting the compressive strength of SCC with fly ash.

• Journal of the Korean Wood Science and Technology
• /
• 제14권2호
• /
• pp.36-42
• /
• 1986

Both the control and heated specimen of oak, hornbean, alder, poplar, red pine and pitch pine among domestic commercial species and taun imported were used for radial and tangential shrinkage and movement that occurred on changing the relative humidity of the atmosphere from 90 percent to 60 percent at $25^{\circ}C$. The results of this study were as follows. 1. The radial and tangential shrinkage of the control and heated hornbean and oak wood, except alder, of high specific gravity showed greater than species with low specific gravity. The ratio of tangential to radial shrinkage was 1.46 for taun to 2.70 for alder. Green volume specific gravity of the heated and soaked specimen of all species except poplar decreased 1.5 to 3.1 percent. Shrinkage of the heated specimen increased more than that of the control specimen, and antishrink efficiency of all timbers except alder had negative value. Shrinkage from green to air dry of treated specimens increased more than case of total shrinkage, and radial shrinkage of those specimen increased greater than tangential shrinkage. 3. The movement of the heating specimen for 120 hours decreased than those of the control and the heating specimen for 240 hours. The movement of heating oak, poplar, red pine and pitch pine (or 240 hours increased rather than those of the control specimen.

• 한국통신학회논문지
• /
• 제30권8A호
• /
• pp.688-696
• /
• 2005

본 논문에서는 위성을 이용한 디지털 위성방송 시스템에 적용하기 위한 고효율 평면안테나를 설계 및 제작하였다. 전통적인 접시형 안테나에 비하여 높은 개구효율, 용11한 설치 및 미려한 외관 등의 장점을 가지고 있는 평면 안테나를 설계하였다. 안테나 소자의 설계에는 마이크로스트립을 이용한 Annular Ring 공진기를 이용하였으며, 방사형 도파관을 이용한 급전구조를 채택하였다. 또한 수신신호를 중간주파 신호로 변환하기 위한 LNB를 안테나의 뒷면에 설치함으로써 전송손실의 최소화를 꾀하였다. 제작된 안테나는 직경 35cm, 이득은 31.8dBi 이며 개구효율은 약 $80\%$이다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.543-544
• /
• 2006

Shape optimization of a transonic axial compressor rotor operating at the design flow condition has been performed using three-dimensional Navier-Stokes analysis and three different surrogate models: i.e.., Response Surface Method(RSM), Kriging Method, and Radial Basis Function(RBF). Three design variables of blade sweep, lean and skew are introduced to optimize the three-dimensional stacking line of the rotor blade. The object function of the shape optimization is selected as an adiabatic efficiency. Throughout the shape optimization of the rotor blade, the adiabatic efficiency is increased for the three different surrogate models. Detailed flow characteristics at the optimal blade shape obtained by different optimization method are drawn and discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권8호
• /
• pp.1030-1035
• /
• 2012

본 연구에서는 OTEC에 적용가능한 구심터빈을 대상으로 암모니아를 적용하여 8kW급 구심터빈의 설계 및 CFD 해석을 수행하였다. 구심터빈은 스크롤 케이싱, 18개의 베인노즐, 13개의 로터 블레이드로 구성된다. 질량유량과 입구온도는 0.5kg/s와 $25^{\circ}C$이며, 가변회전수 12,000~36,000 rpm 범위내에서 9가지 조건에 대해 해석을 수행하였다. 회전수 변화에 따른 해석결과, 설계회전수 24,000 rpm에서 최대효율점을 보였으며, 이때 최고효율은 88.66 %, 출력은 8.52kW이다. 향후, 팽창비가 1.4~1.5 정도의 범위를 갖도록 최적설계 과정을 통한 연구가 필요하다. 본 연구를 통해 분석된 해석결과는 다양한 작동유체 조건에서 목표출력에 해당하는 구심터빈의 최적 설계파라미터 구성을 위한 설계자료로 유용하게 활용될 것으로 기대한다.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.2171-2180
• /
• 1991

본 연구에서는 구심터어빈의 설계시 많이 사용되고 있는 NASA의 안내깃 및 회 전익 손실모델들을 이용하여 PR과 K를 실험에 의존하지 않고 구하는 방법을 제시하고 자 한다. 그리고 이 방법을 가변 안내깃이 존재하거나 없는 가상의 구심터빈에 대하 여 탈설계 성능해석을 하여, 본 방법이 기존에 알려진 실험 현상과 유사한 경향을 보 이는지를 알아보기로 한다. 또한 안내깃이 있는 경우에 대하여 기존의 알려진 탈설 계 성능 예측용 프로그램과의 비교를 통하여 본 연구의 해석방법을 간접적으로 검증하 기로 한다.