• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1165-1168
• /
• 1996

The neural network approach has been shown to be a general scheme for nonlinear dynamical system identification. Unfortunately the error surface of a Multilayer Neural Network(MNN) that widely used is often highly complex. This is a disadvantage and potential traps may exist in the identification procedure. The objective of this paper is to identify a nonlinear dynamical systems based on Radial Basis Function Networks(RBFN). The learning with RBFN is fast and precise. This paper discusses RBFN as identification procedure is based on a nonlinear dynamical systems. and A design method of model follow control system based on RBFN controller is developed. As a result of applying this method to inverted pendulum, the simulation has shown that RBFN can be used as identification and control of nonlinear dynamical systems effectively.

• International Journal of Fluid Machinery and Systems
• /
• v.5 no.2
• /
• pp.49-59
• /
• 2012

The present study is devoted to the influence of a superposed radial inflow in a rotor-stator cavity with a peripheral opening. The flow regime is turbulent, the two boundary layers being separated by a core region. An original theoretical solution is obtained for the core region, explaining the reason why a weak radial inflow has no major influence near the periphery of the cavity but strongly affects the flow behavior near the axis. The validity of the theory is tested with the help of a new set of experimental data including the radial and tangential mean velocity components, as well as three components of the Reynolds stress tensor measured by hot-wire anemometry. The theoretical results are also in good agreement with numerical results obtained with the Fluent code and experimental data from the literature.

• International Journal of Fluid Machinery and Systems
• /
• v.6 no.1
• /
• pp.18-24
• /
• 2013

In order to apply the design method of diagonal flow fan based on axial flow design to the design of radial-outflow type diagonal flow fan which has lower specific speed of 600-700 [$min^{-1}$, $m^3/min$, m], radial-outflow type diagonal flow fan which specific speed was 670 [$min^{-1}$, $m^3/min$, m] was designed by a quasi three-dimensional design method. Experimental investigations were conducted by fan characteristics test, flow surveys by a five-hole probe and a hot wire probe. Fan characteristics test agreed well with the design values. In the flow survey at rotor outlet, the characteristic region was observed. Two flow phenomena are considered as the cause of the characteristic region, one is tip leakage vortex near rotor tip and another is pressure surface separation on the rotor blade.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.5
• /
• pp.62-66
• /
• 2004

A study for investigating the effects of the cutting conditions(feed rate, radial depth of cut, cutting speed) and the tool diameter on the circumferential geometry of the cyl indrically end-mi1led workpiece is described. In this work, the circumferential geometry is characterized by the roundness error. Experimental results show that the circumferential geometry is directly affected by the material removal per tooth,which is defined as a function of the cutting speed, the feed rate and the radial depth of cut. And, the radial depth of cut is revealed to be the most critical condition among them. It is also found that the roundness error decreases when the tool diameter is larger under the same cutting conditions.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.96-100
• /
• 2007

Condenser lens and objective lens are used to demagnify the image of the crossover to the final spot size. In lens, electrons are focused by magnetic fields. This fields is fringing field. It is important in electron focusing. Electron focusing occurs the radial component field and axial component field. Radial component produces rotational force and axial component produces radial force. Radial force causes the electron's trajectory to curve toward the optic axis and corss it. Focal length decreases as the current of lens increases. In this paper, we use the focal length for desiging the hardware of lens current control and present the results.

• Archives of Reconstructive Microsurgery
• /
• v.14 no.1
• /
• pp.31-36
• /
• 2005

Purpose: We analyzed the result of the radial forearm island flap for the reconstruction of amputated fingers. Materials and Methods: From March 2001 to February 2004, we assessed two patients who could not be able to receive replantation and six patients who had necrosis of the fingers after replantation. There were six men and two women. The mean age was 42 years. The average duration of follow-up was 26months. Results: All flaps were survived. Two patients needed bone graft. Two patients needed curettage due to osteomyelitis. All patients needed fat reduction procedure. No patients needed amputation of reconstructed digit due to complication. Conclusion: Radial forearm island flap seems useful operation procedure for severely amputated digit or necrotized digit after replantation.

• Transactions of Materials Processing
• /
• v.16 no.1 s.91
• /
• pp.67-74
• /
• 2007

This study is aimed to find out the optimal forming conditions by comparing and analyzing material flow, deformation pattern, and a forming load through rigid-plastic FEM for a flange using pipe. Flanges are widely used for various purposes as connectors of industrial steel pipes which are manufactured by drawing process. The forming feature of flange was reviewed through both heading process and radial extrusion process in a cold working condition. As a result of simulation, the shape of flange can not be made by heading process, but made by radial extrusion process. The effects of design factors, such as gap-height, die-comer radius, and frictional factors on maximum forming load and deformation pattern are investigated for radial extrusion process.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.3
• /
• pp.10-20
• /
• 2012

The pumping capacity of riverbank filtration using radial collector wells at the Geum, Yeongsan, Seomjin, and Nakdong rivers was evaluated using Milojevic's equation. Assessment of the radial collector wells' pumping capacity in riverbank filtration was carried out using a case study in which one set of collector wells is installed in the watershed of each river. Nakdong River was evaluated to have the highest pumping capacity for riverbank filtration. The areas capable of producing over 10,000 $m^3$ per day were found mostly in the Nakdong River.

• The tire
• /
• s.118
• /
• pp.47-48
• /
• 1985

일본자동차타이어회사(JATMA)에서 발표한 1984년도 일본자동차용타이어의 생산,출한 재고실적을 보면 타이어 총생산량은 140,514천개로 전년대비 5.6% 증가하였고, 국내출하는 109,460천개로 동 4,8% 증가하였다. 또 수출은 총 30,505천개로 동 7.4%증가하였으며, 수출비율은 21.8% 였다. 그리고 생산 및 국내외 출하량은 다같이 지금까지 최고기록이었다. 또한 판매량은 신차용 타이어가 61.571천개, 교환용타이어가 45.867천개, 수출용타이어가 30.505개로 총 137.943천개이다. Radial 타이어 생산은, 승용차용이 78,976천개로 전년대비 8.2% 증가하고 Radial 비율은 78.9%이며 또 트럭ㆍ버스용은 10.173천개로 동6.2%증가하고 Radial 비율은 52.0%, 그리고 소형 트럭용은 38.114천개로 동 3.6% 증가하고 Radial 비율은 18.7%이다. 또 84년에는 년초의 대설로 인한 대혹적인 수요증가로 Snow타이어의 생산이 총 13.160천개로 전년대비 29.9% 증가하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.84.2-84.2
• /
• 2010

Radial changes of stellar population within the Galactic globular clusters have been reported in many spectroscopic and photometric studies. We present new integrated spectroscopic data for 24 Galactic globular clusters and have measured line indices within various aperture sizes. Radial gradients have been investigated for the Balmer lines and metal lines (Mgb). Our results show an increase in the strength of the Balmer lines toward the centres in some clusters including NGC7078, NGC7089, and NGC6934, in which colour gradients also have been detected previously. However, some other clusters show little trend or even an increase toward the outskirt in the Balmer lines. Metal sensitive lines generally have an anti-correlation with the Balmer lines. We discuss possible stellar populations being responsible for the radial change in line indices.