• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.6
• /
• pp.110-119
• /
• 2000

In this paper, an experimental study is carried out under the operating conditions of low speed and rapid acceleration in order to investigate and improve the response characteristics of a turbocharged diesel engine with radial turbine driven by exhaust gas. A rapid acceleration for investigating the response performance is applied to the fuel-pump rack of the engine from 0-10% to 0-40% in steps of 10%, and accelerating time of 1, 2 and 3 seconds is applied to the engine. Further experiment for improving the low speed torque and acceleration performance is also performed by means of injecting air into the inlet manifold at compressor exit during the period of low speed and application of a rapid acceleration. The effects of air injection on the response performance are represented at subjected engine speed with the changes of response performance factors such as air injection pressure, air injection period, accelerating rate, accelerating time and load. From the experimental results obtained throughout this study, it is shown that air injection into the inlet manifold at compressor exit is closely related to the improvement of low speed and acceleration performance of a turbocharged diesel engine.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.4
• /
• pp.210-216
• /
• 2006

The circle hook experiments were conducted to compare the catch rates of target and bycatch species between J hook and circle hooks in the tuna longline fishery of the eastern Pacific Ocean between $1^{\circ}48'S-7^{\circ}00'S\;and\;142^{\circ}00'-149^{\circ}13'W$ from July 15 to August 12, 2005. In the target species group no significant differences among 3 types hook, between size 4.0 traditional tuna hooks(J-4) and size 15 circle hooks(C15), and between C15 and size 18 circle hooks(C18) were revealed, but significant differences were found between J-4 and C18. In the bycatch species group significant differences were found among 3 types hook, between J 4 and C15, and between J-4 and C18, but no significant differences were revealed between C15 and C18. Large circle hook(C18) had the lowest catch rate for tunas and for other fishes, and the small circle hook(C15) had lowest rate for billfishes and sharks. The length distributions for bigeye tuna are very similar for the 3 hook types. There were very slight differences in length size between hook types in the bycatch species.

• Archives of Reconstructive Microsurgery
• /
• v.22 no.2
• /
• pp.52-56
• /
• 2013

Purpose: We had proceeded seven iIpsilateral dorsalis pedis vascularized pedicle flaps in the distal leg and foot to cover the restricted size defects and followed-up average for 5 years and 9 months to evaluate the survival rate, neurosensory function and cosmesis in final results. Materials and Methods: From January 1999 through October 2012, we have performed iIpsilateral dorsalis pedis vascularized pedicle flaps in the distal leg and foot to cover the restricted size defect (average around $3.6{\times}2.4cm$) in 7 cases and average age was 41.6 years (21.5 to 59.0 years). Lesion site was posterior heel in 4 cases, distal anterior leg in 3 cases. Donor structure was the dorsalis pedis artery and the first dorsal metatarsal vessel and deep peroneal nerve in 3 cases and the dorsalis pedis artery and the first dorsal metatarsal vessel in 4 cases. Results: Seven cases (100%) were survived and defect area was healed with continuous dressing without skin graft. The sensory function in the neurovascular flap was restored to normal in 3 cases. Cosmesis was good and fair in 7 cases (85.7%). Conclusion: Ipsilateral dorsalis pedis vascularized pedicle flap in the distal leg and foot is one of the choice to cover the exposed bone and soft tissues without microsurgical procedure.

• Smart Media Journal
• /
• v.9 no.1
• /
• pp.84-91
• /
• 2020

Along with increasing the renewable energy utilization, many researches have paid attention on the utilization and efficiency of energy storage systems. Especially, it is required an operational model in order to actively respond with each system's failure of sub-systems in the solar energy storage system. This paper proposes an energy management scheme by estimating the newly generated power based on the solar power generation samples. With comparing the estimated battery charging power in real time and the total charging power of the battery rack, a charge model is applied to adjust the charging power, As a result, the stability of energy storage system would be improved by suppressing the battery heat while maintaining battery C-Rate.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.330-335
• /
• 2004

The needs of walking assistive device such as the Ankle Foot Orthosis (A.F.O.) are getting greater than before. However, most of the A.F.O. are generally imported rather than domestic manufacturing. The major reason of high import reliability is the rack of impact properties of domestic commercial products. Therefore, this research is going to focus on the evaluation of impact properties of the A.F.O. which has the high import reliability. Unfortunately, these kinds of researches are not performed sufficiently. This research is going to evaluate impact energy behavior in composite materials such as the glass/epoxy (S-glass, $[0/90]_{2S}$) and the aramid/epoxy (Kevlar-29, woven type, 8 ply) of ankle foot orthosis. The approach methods were as follows. 1) The history of impact load and impact energy due to the various velocities. 2) Relationship between the deflection and damage shape according to the impact velocities. 3) The behavior of absorbed energy and residual strength rate due to the various impact velocities.

• Proceedings of the KSPS conference
• /
• 2005.11a
• /
• pp.215-218
• /
• 2005

This paper reports the current status of development of the Korean speech recognition platform (ECHOS). We implement new modules including ETSI feature extraction, backward search with trigram, and utterance verification. The ETSI feature extraction module is implemented by converting the public software to an object-oriented program. We show that trigram language modeling in the backward search pass reduces the word error rate from 23.5% to 22% on a large vocabulary continuous speech recognition task. We confirm the utterance verification module by examining word graphs with confidence score.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.65 no.1
• /
• pp.61-72
• /
• 2023

The increase in the rearing intensity of pigs has caused deterioration in the pig house's internal environment such as temperature, humidity, ammonia gas, and so on. Traditionally, the widely used method to control the internal environment was through the manipulation of the ventilation system. However, the conventional ventilation system had a limitation to control the internal environment, prevent livestock disease, save energy, and reduce odor emission. To overcome this problem, the air-recirculated ventilation system was suggested. This system has a semi-closed loop ventilation type. For designing this system, it was essential to evaluate the ventilation rates considering the pressure loss of ducts. Therefore, in this study, pressure loss calculation and experiment were conducted for the quantitative ventilation design of a semi-closed loop system. The results of the experiment showed that the inlet through which external air flows should always be opened. In addition, it was also found that for the optimum design of the semi-closed loop ventilation system, it was appropriate to install a damper or a backflow prevention device rather than a ventilation fan.

• Land and Housing Review
• /
• v.6 no.4
• /
• pp.195-213
• /
• 2015

Recently, there has been changing the housing rental market paradigm structure which has been increased the ratios of partly monthly rental ratios, because of increasing chonsei's price, the preference of monthly rental and the rack of chonsei's supply amount. This study had done a survey of 1,400 people for private and public rental residents by region and housing types during Dec. 2014. According to the result of survey, Market participant prospect strongly to change chonsei to monthly rental market structure and the reason of rising of chonsei's price is the preference of householder's monthly rental because of decreasing interest rate and the rack of chonsei's supply amount. The housing policy's proposal of the stability of low income class's housing and jense's price strongly recommended the expansion of public rental housing supply and the activation of private rental housing, the expansion of chonsei loan, housing boucher etx. The rental market policy for high income class have desired to market autonomy than public side's intervention, on the other hands, the rental market policy for low income class have strongly need to the public side's intervention such as the contiuneous long-term rental housing supply.

• Journal of the Korea Safety Management & Science
• /
• v.21 no.4
• /
• pp.75-80
• /
• 2019

Sales of the Korean clothing industry grew to 16.9 percent on-year in 2010, but the growth rate dropped to 3 percent from 2011 to 2016 and the overall market began to slump to 1.1.6 percent in 2017. The competitiveness of clothing companies is also a major sector in logistics capability, and the average logistics cost of domestic clothing companies is 8.3 percent of sales in 2011, higher than the average 8 percent of domestic industries, and 36.4 percent of the total storage cost in 2011, higher than the 28.8 percent share of the total storage cost of domestic companies. As domestic production conditions such as wage hikes and labor disputes worsened in the 1990s, production facilities were rapidly moved overseas, which led many clothing companies to have no production facilities or a minimal production base in Korea and focus on marketing and design capabilities. The total storage capacity and storage efficiency of the logistics center became very important as the products were changed to the form of mass warehousing and small-volume forwarding. Research shows that building column spacing, a model of this research, can affect the amount of hanger rack storage empirically, so for sustainable growth of clothing companies, it is necessary to improve competitiveness in the logistics market by reducing costs and improving efficiency to overcome difficulties in corporate management. Because logistics costs are 8.3 percent and operating profit to sales ratio is 2 percent, it is expected that operating profit will increase by 41.5 percent if logistics costs are reduced by 10 percent. If 10% of storage cost is saved based on storage cost, operating profit is expected to increase by 15% To strengthen the competitiveness of the clothing industry, a reduction in logistics costs is essential. Therefore, the purpose of this study is to provide hints that logistics experts can have empirically small amounts in reducing storage costs through column spacing adjustment of logistics centers that have not been dealt with statistically until now, and to contribute to the continued growth of clothing companies and the development of the domestic logistics industry.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.10
• /
• pp.1526-1533
• /
• 2004

The needs of walking assistant device such as the Ankle Foot Orthosis (A.F.O) are getting greater than before. However, most of the A.F.O are generally imported rather than domestic manufacturing. The major reason of high import reliability is the rack of impact properties of domestic commercial products. Therefore, this research is going to focus on the evaluation of impact properties of the A.F.O which has the high import reliability. Unfortunately, these kinds of researches are not performed sufficiently. This research is going to evaluate impact energy behavior in composite materials such as the glass/epoxy (S-glass, [0/90]sub 2S/) and the aramid/epoxy (Kevlar-29, woven type, 8 ply) of ankle foot orthosis. The approach methods were as follows. 1) The history of impact load and impact energy due to the various velocities. 2) Relationship between the deflection and damage shape according to the impact velocities. 3) The behavior of absorbed energy and residual strength rate due to the various impact velocities.