• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.511-520
• /
• 2011

The purpose of this study was to provide scientific information to track and field coaches and athletes through the analyses of the biomechanics characteristics of the top 4 sprinters in the men's 100 m final in the IAAF World Championships Daegu 2011. Twelve video cameras (Sony, Japan) were used to capture the mid portion of the race (40 m - 70 m) with a sampling frequency of 60Hz. Biomechanical variables including the right ankle, knee and hip angles, the trunk angle, and the velocity of center of mass (COM) in the running direction, were calculated with the Kwon 3D program (Visol, Korea). Correlation coefficients between the COM velocity and each variables were calculated using Matlab 2008a (MathWorks, USA) at an alpha level of 0.05. The findings indicated that Yohan Blake (JAM) showed greater range of motion at the ankle and hip. Walter Dix(USA) showed greater knee and trunk movement, and Kim Collins (SKN) showed more dorsi-flexed and extended trunk angles during the race. Finally, Christophe Lemaitre (FRA) showed more plantar-flexed ankle with a less trunk motion, throughout the analyzed race.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.253-257
• /
• 1998

지금까지 직물의 역학적 특성을 고찰하기 위하여 직물의 구조에 대한 기하학적인 모델들이 많은 연구자들에 의해 소개되어 왔다. 1937년에 Peirce$^1$가 원형 단면의 모델을 제안하면서부터 이 모델을 기본으로 한 기하학적 모델에 대한 연구가 활발히 진행되어 race track 모델, lenticular 모델, circular arc 모텔, 직선 모델등 여러 가지 모델이 제시되었다. 이러한 모델들은 직물의 종류와 이완상태에 따라 직물의 역학적 특성을 예측하는데 있어 커다란 차이가 있다.(중략)

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.263-265
• /
• 2003

A winding machine to fabricate the double pancake coils was manufactured. A race-track type double pancake coil using high temperature superconductor (HTS) tape was prepared and I-V and I-H characteristic curves were obtained at the atmosphere of liquid nitrogen. The winding method to make the double pancake coil and its properties is discussed.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.28 no.4
• /
• pp.61-69
• /
• 2022

Purpose: In response to the rapid spread of COVID-19 in 2020, the government supported facilities and equipment through the 'Urgent Isolation Ward Expansion Project'. Design and remodeling of efficient negative pressure isolation facilities had to be done in a short period of time, and the performance gap between facilities was very large because the types of hospitals and wards of existing medical facilities were diverse. In order to secure the stability of isolation wards between medical facilities and reduce the facility gap, guidelines for planning isolation wards considering the diversity of each hospital should be appropriately presented. In consideration of these points, this study aims to provide basic data for future remodeling guidelines for each plan type of the negative pressure isolation ward first. Methods: We analyzed the plans before and after the change of 13 case hospitals that performed the urgent care bed expansion project for COVID-19 confirmed patients. Before the remodeling, the current status of the facility was analyzed according to the type of corridor, the location of the nursing station, and the location of the elevator. After remodeling, the flow of medical staff and patients, the flow of entry and exit of clean and contaminated items, and the space of negative pressure and non-negative pressure areas. Results: The ward type was divided into three types according to the corridor type and room arrangement: double loaded corridor type with two side wards, race track type with one side ward, and race track type with two side wards. Based on these three types, the standard floor plan type of the isolation ward was proposed in terms of the location of the elevator bank and Nurse station. Implications: When the existing general ward is converted into a negative pressure isolation ward, this study can be a basic data to present customized guidelines for each ward type.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.1
• /
• pp.35-39
• /
• 2013

The superconducting Homopolar motor is manufactured and tested. Homopolar motor system is simple and solid as the field coil of the motor is fixed near the stator coil without rotating system. In this paper, a 5 kW fully superconducting homopolar motor which has high temperature superconducting armature and field coils is manufactured and tested in liquid nitrogen. The critical current test results of the used 2G superconducting wire, pancake coil for rotor winding and race-track coils for armature winding are reported. Also, the test result of rotating and operating performance is presented. The operating frequency is to be 5 Hz for low-speed rotating. The developed fully superconducting Homopolar motor is the world's first.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.768-773
• /
• 2005

We present an overview of our new method of liquid crystal (LC) alignment based on the anisotropic etching of the alignment layers with a directed plasma flux. The method is realized by the use of anode layer source of "race track" geometry generating two "sheets" of accelerated plasma. These sheets are directed obliquely to the treated substrates. The static and dynamic irradiation regimes have been explored. The optimized processing conditions and materials are discussed. The technique yields an excellent uniformity of liquid crystal alignment of planar, tilted and vertical types. It is shown that the new method can be easily adapted for the alignment treatment of large area substrates used in the modern LCD manufacturing process.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.292-296
• /
• 2004

In case of Resin Transfer Molding(RTM) process, 'race-track' effects and non-uniform fiber volume fraction may cause undesirable resin flow pattern and thus result in dry spots, which affect the mechanical properties of the finished parts. In this study, a real time RTM control strategy to prevent these unfavorable effects is proposed. The control strategy consists of two 'stages' depending on the extent the resin front has reached. Through numerical simulations and experiments, the validity of the proposed scheme is demonstrated. The results show that the proposed scheme is effective in reducing the void formation during RTM mold filling.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.441-441
• /
• 2010

Hyperthermal neutral beam (HNB)은 박막 성장에 필요한 에너지와 반응 입자들을 동시에 공급할 수 있기 때문에 특히, 저온에서 박막을 성장시킬 때 매우 유용하다. 이와 같은 목적으로 race track 형태의 자기장 구조를 갖고 있는 2.45 GHz electron cyclotron resonance (ECR) plasma를 이용한 HNB 소스를 개발하였다. HNB 소스에서 인출되는 입자들은 중성 입자 뿐만 아니라 이온이나 전자와 같은 하전 입자들로 구성되어 있다. 그러나 양질의 HNB를 얻기 위해서는 하전 입자들의 구성 비율을 최소화해야 한다. HNB 소스는 하전 입자의 구성 비율을 1 % ($1{\mu}A/cm^2$) 이하가 되도록 설계되었다. 이것을 위해서 영구 자석의 자기장을 이용한 plasma limiter를 설계하였다. 대부분의 전자는 limiter 앞에 형성된 자기장의 구조와 반응하여 주로 gradient B drift와 curvature drift를 통하여 차단되고, 이온은 로렌츠 힘을 받아 빔 축으로 부터 벗어나도록 하였다. Limiter의 특성을 연구하기 위해서 정전탐침을 limiter에서 빔 축 방향으로 이동시키면서 I-V 곡선과 이온 포화 전류 및 전자 포화 전류를 측정하였다. 측정 결과를 바탕으로 plasma limiter의 성능을 검증하였고 문제점을 논의하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.396-396
• /
• 2010

최근에 자구벽 이동을 이용한 race track memory, 혹은 나노자성체의 자구 동역학 등에 대한 관심이 집중되고 있다. 용량은 하드디스크의 크기를 가지며 속도는 SRAM, 집적도는 DRAM에 필적하는 새로운 메모리의 실현은 지금까지 이용되는 대부분의 메모리를 대체할 가능성이 있다. 이러한 메모리의 개발에 가장 기본이 되는 측정기술은 나노크기의 자성 구조체에서 자구 혹은 자구벽 이동을 측정하는 기술로써 현재 국내에서 자성 나노구조의 자화방향과 더불어 topography를 동시에 측정할 수 있는 장치는 본 SEMPA가 유일하다. SEMPA는 기존에 사용되어지던 SEM(전자 현미경) 에서 알 수 있는 나노 구조의 형상이외에 전자의 스핀방향을 검출함으로써 형상과 스핀의 결함된 imaging 을 할 수 있다. 일반적으로 기존의 SEM의 경우 고 에너지빔의 전자빔을 주사시키고 이때 발생되는 이차 전자의 수를 2차원상의 영역에 따라 달라지는 비로 mapping 을 하게 된다. 이때 전자의 수뿐만 아니라 이들의 스핀편향(spin polarization) 을 측정할 수 있다면 형상뿐만 아니라 표면에서의 스핀상태를 동시에 측정 할 수 있게 된다. 본 발표에서는 이 방법을 이용하여 나노구조체의 자구측정 결과를 제시하고자 한다.

• Korean Journal of Heritage: History & Science
• /
• v.37
• /
• pp.213-242
• /
• 2004

"China", "Guang-Xi(廣西)", "Dong-Shan(東山)", a marriage of "Yao-zu(瑤族)" divide mainly into a distinguished family form, but are by a marriage of a traditional general form (a woman getting married) and "Zhaoxu-Hun(招婿婚)", a marriage of "Liangtou-che(兩頭扯)". These two marriage format that mentioned the back is a marriage format to often appear in other Chinese minority race region while being a custom peculiar to "Yao-zu(瑤族)" marriage method. "Zhaoxu-Hun(招婿婚)" provides labor force as a workman while living with a man sinks with "son-in-law" to a woman house, and doing, and it is to carry out a lot of duty as a husband too. "A Liangtou-che(兩頭扯)" marriage is more characteristic, but lives while going around a bilateral family while man and woman each stay in an own house. There are inheritance of property rights to own family, too and obeys anger of he direction family bilateral where if lays a child even if stands up and holds a memorial service. At the same time that these marriages are performed between the same "Yao-zu(瑤族)" near a track, and solution does a distribution problem between a labor problem and the families which were unstable through a mutual marriage for the purpose a compunction "Yao-zu(瑤族)" social network construction into intimacy anger. A general idea is covered he base with in order the porcelain which is a weak race prevent that it is assimilated by external aggression because "Yo-zu(瑤族)" has always received aggression of "a Han-zu(漢族)" too historically, and to keep an ethnic pure blood.