• Environmental Analysis Health and Toxicology
• /
• 제31권
• /
• pp.21.1-21.7
• /
• 2016

Objectives The present study analyzes metal contamination in sediment of the East Kolkata Wetlands, a Ramsar site, which is receiving a huge amount of domestic and industrial wastewater from surrounding areas. The subsequent uptake and accumulation of metals in different macrophytes are also examined in regard to their phytoremediation potential. Methods Metals like cadmium (Cd), copper (Cu), manganese (Mn), and lead (Pb) were estimated in sediment, water and different parts of the macrophytes Colocasia esculenta and Scirpus articulatus. Results The concentration of metals in sediment were, from highest to lowest, Mn ($205.0{\pm}65.5mg/kg$)>Cu ($29.9{\pm}10.2mg/kg$)>Pb ($22.7{\pm}10.3mg/kg$)>Cd ($3.7{\pm}2.2mg/kg$). The phytoaccumulation tendency of these metals showed similar trends in both native aquatic macrophyte species. The rate of accumulation of metals in roots was higher than in shoots. There were strong positive correlations (p <0.001) between soil organic carbon (OC) percentage and Mn (r =0.771), and sediment OC percentage and Pb (r=0.832). Cation exchange capacity (CEC) also showed a positive correlation (p <0.001) with Cu (r=0.721), Mn (r=0.713), and Pb (r=0.788), while correlations between sediment OC percentage and Cu (r=0.628), sediment OC percentage and Cd (r=0.559), and CEC and Cd (r=0.625) were significant at the p <0.05 level. Conclusions Bioaccumulation factor and translocation factors of these two plants revealed that S. articulatus was comparatively more efficient for phytoremediation, whereas phytostabilization potential was higher in C. esculenta.

• Journal of applied mathematics & informatics
• /
• 제28권1_2호
• /
• pp.99-107
• /
• 2010

This paper is a study about the relationships among topologies and intuitionistic fuzzy topology induced, respectively, by approximation operators and an intuitionistic fuzzy approximation operator associated with an approximation space (X, R), when the relation R on X is precisely reflexive and transitive. In particular, we consider an intuitionistic fuzzy approximation operator on an approximation space X (i.e., a set X with a reflexive and transitive relation on it), which turns out to be an intuitionistic fuzzy closure operator. This intuitionistic fuzzy closure operator gives rise to two saturated fuzzy topologies on X and it turns out that all the level topologies of one of the fuzzy topology coincide and equal to the topology analogously induced on X by a crisp approximation operator. These observations are then applied to intuitionistic fuzzy automata.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 2005년도 통합학술대회 논문집
• /
• pp.5-28
• /
• 2005

This paper estimates the effect of networks on innovative performance at the firm level , using Korean Innovation Survey (KIS) dataset Product innovation, product improvement , and process innovation are used as proxies for innovative activity. The explanatory variables such as firm size, market concentration ratio, lagged profitability, foreign ownership, export ratio, firm's age, formal R&D activity, and industrial R&D intensity are yet other considerations. With two year-long (2000 and 2001) data from 1,124 Korean manufacturing firms, we estimated the logistic regression model. The research finding indicates that the external networks have a strong positive effect on innovative output regardless of type of innovation. However, the network effects by partner (other firms or research institutions) vary across the type of innovation. Especially, we found that the user-supplier linkage plays an important role in product ion innovation, product improvement, and process innovation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권3호
• /
• pp.335-340
• /
• 2006

A large number of toxicological substances and pharmacological and physical agents can cause reproductive intervention at the cellular and molecular level. The present study was designed to assess the effect of mercury ($HgCl_2$) at 50 to $550{\mu}M$ concentration ranges, in vitro, on the sperm membrane and DNA integrity, viability, and acrosomal status of normal bull spermatozoa. The samples were processed for sperm analyses using semen-diluting fluid (PBS, pH 7.2). We recorded a sharp increase in the lipid peroxidation/LPO rate; the highest was at $550{\mu}M$ mercury concentration, indicating a deleterious effect of mercury on the sperm membrane intactness. There was also a strong negative correlation between LPO rate and % viable spermatozoa (R = 0.987, p<0.001). Data obtained from a comet assay technique revealed that mercury is capable of inducing DNA breaks in the sperm nuclei. Interestingly, 92% of DNA breaks were double-stranded. The correlation between LPO rate and % DNA breaks was 0.984. Performing the gelatin test indicates that mercury is able to alter the integrity of acrosomal membranes showing an abnormal acrosome reaction. In this regard, a strong link was found between LPO rate and % halos (R = 0.990, p<0.001). Collectively, mercury proved to be a potent oxidant in the category of environmental factors affecting bull spermatozoa. Hence, considering the wide spread use of mercury and its compounds, these metals should be regarded with more concern.

• 한국정보시스템학회:학술대회논문집
• /
• 한국정보시스템학회 2004년도 춘계학술대회
• /
• pp.175-201
• /
• 2004

In industrialised countries, innovation is a key source of economic growth. Research is a key driver of technological innovation and involves the process of systematic investigation and/or experimentation to discover new knowledge. The Governments' industry innovation policy supports a business focus on Research and Development (R&D) through a range of programs in order to achieve these aims. The Innovation Statement (DISR 2000, 20010, launched by the Australian Prime Minister in January 2001, commits an additional $\$3$ billion over five years to encourage and support innovation. The Australian Government aims to build world competitive firms and strong research capability in industry to strengthen Australia's international competitiveness and increase national prosperity. It develops policies and programs to enhance investment in innovation. The Australian Government has establisher a number of R&D funding support programs aimed at increasing the level of R&D in Australia. The backbone of these programs is the tax concession program, which is made up of the 125 per cent R&D tax concession, the 175 per cent premium tax concession and the tax offset. Over 4000 businesses take advantage of the tax concession scheme, which costs the government around $\$400$ million a year. This cost is expected to rise to over half a billion by 2005-06 (Commonwealth of Australia, 2003). Ensuring these resources are invested where they provide significant national economic benefits is a major policy issue. In this sense, this paper looks at the appropriateness, effectiveness and efficiency of the R&D tax concession with costs and benefits analysis.

• Structural Engineering and Mechanics
• /
• 제17권2호
• /
• pp.153-166
• /
• 2004

An elasticity solution for sandwich plates assembled with non-rigid bonding and subjected to edgewise loads is presented. The solution satisfies the equilibrium equations of the face and core elements, the compatibility equations of stresses and strains at the interfaces, and the boundary conditions. To investigate the effects of bonding stiffnesses on the responses of sandwich plates, numerical evaluations are conducted. The results obtained have shown that the bonding stiffness, up to a certain level, has a strong effect on the plate mechanical response. Beyond this level, the usual assumption of perfect bonding used in classical theories is quite acceptable. An answer to what constitutes perfect bonding is found in terms of the ratio of the core stiffness to the bonding stiffness.

• Fibers and Polymers
• /
• 제6권1호
• /
• pp.72-78
• /
• 2005

The impact of fiber friction, yarn twist, and splicing air pressure on mechanical and structural properties of spliced portion have been reported in the present paper. The mechanical properties include the tensile and bending related properties and, in the structural properties, the diameter and packing density of the splices are studied. A three variable three level facto­rial design approach proposed by Box and Behnken has been used to design the experiment. The results indicate that there is a strong correlation between retained spliced strength (RSS) and retained splice elongation (RSE) with all the experimental variables. It has been observed that RSS increases with the increase in splice air pressure and after certain level it drops, whereas it consistently increases with the increase in yarn twist. The RSE increases with the increase in both fiber friction and yarn twist. It has also been observed that the yarn twist and splicing air pressure have significant influence on splice diameter, percent increase in diameter and retained packing coefficient, but the fiber friction has negligible influence on these parame­ters. Yarn twist and splicing air pressure has a strong correlation with splice flexural rigidity, where as poor correlation with retained flexural rigidity.

• 생약학회지
• /
• 제31권1호
• /
• pp.101-104
• /
• 2000

An inhibitory activity against ${\alpha}-glucosidase$ was identified in extract of an edible lichen, Umbilicaria esculenta. The inhibitor was very stable retaining above 95% of its original activity when treated with heat, acid and alkaline conditions, and some hydrolytic enzymes. Partially purified inhibitor showed strong inhibition against disaccharide hydrolytic enzymes of mammalian and mold origin, but weak or no inhibition against polysaccharide hydrolytic enzymes except glucoamylase. The inhibitor suppressed elevation of blood glucose level in rats after oral administration of soluble starch or sucrose.

• 여성건강간호학회지
• /
• 제7권3호
• /
• pp.393-406
• /
• 2001

The purpose of this study was to find out women's need and level of knowledge about episiotomy, pain and discomfort related to episiotomy on a cross-sectional survey design. The subjects were 102 postpartal women agreed on oral consent. 34 postpartal women admitted at obstetric ward of H university hospital, 34 postpartal women admitted at 2 Sanhujoriwons, and 34 women within one year afterbirth. They were selected in Seoul, Korea. Data were collected from July, 1 to September 30, 2000, by a structured questionnaire. The instrument used for this study was a questionaire consisted of 5 items of general characteristics, 12 items of obstetric characteristics, 10 items of level of knowledge (Chronbach $\alpha$ .8176), 8 items of need of education(Chronbach $\alpha$ .8836), 3 items of pain (Chronbach $\alpha$ .9252), and 3 items of discomfort (Chronbach $\alpha$ .8092). The data were analyzed by the SPSS/PC+ program using t-test, ANOVA and Scheffe test as a post hoc and Pearson Correlation Coefficient. The results of the study were as follows; 1. 63.2% of respondents had right answer on 6-8 items among 10 items. Only 4.4% of women got right answer on 10 items all. 2. The need of education was high(4.45%) on all items and the range of score was $4.25{\sim}4.64$. 3. The strength of pain was the highest within one week afterbirth(5.93/10) and became lower in 8-14 days afterbirth(2.55). And after 15days of postpartum, the pain level became to the lowest level(1.08). However, pain was delayed until more than one month afterbirth. 4. The level of discomfort was the highest one week afterbirth(6.88/10) and became lower in 8-14 days afterbirth(4.20). And after 15days of postpartum, the discomfort level became to the lowest level(2.47). Universally, the degree of discomfort was higher than pain. 5. There was a strong positive correlation between discomforts and pain ($r=.752^{**}$) and weak positive correlation between discomforts and the level of educational need($r=.308^*$). In conclusion, women have a right to choose whether she will have episiotomy or not according to her decision making based on the comprehensive knowledge of episiotomy before they get episiotomy with consent process and explanation in detail. Women health care providers like nurses have a responsibility to do conscious raising and empowerment for women so that they could lead themselves to choose given medical treatments for women's health and wellbeing and the quality of life in her life cycle.

• Structural Engineering and Mechanics
• /
• 제46권4호
• /
• pp.487-504
• /
• 2013

In the present work a new friction device, with a set of single or double rotational friction flanges and a link element, is described and tested. The mechanism may be applied for the strengthening of existing r/c or steel buildings as well as in new constructed buildings. The device has selectable variable behavior in different levels of displacement and an interlock mechanism that is provided by the link element. The link element may be designed to lock at preselected level of displacement, offering in this way an extra safety reserve against strong earthquakes. A summary of the existing literature about other similar mechanisms is initially presented in this paper. The proposed mechanism is presented and described in details. Laboratory experiments are presented in detail and the resulted response that proves the efficiency of the mechanism at selectable levels of strength capacity is discussed. Drawings of the mechanism attached to a r/c frame with connection details are also included. Finally a dynamic analysis of two r/c frames, with and without the proposed mechanism attached, is performed and the resulted response is given. The main conclusion is that the proposed mechanism is a cheap and efficient devise for the improvement of the performance of new or existing framed buildings to seismic loads.