• Journal of Environmental Policy
• /
• v.4 no.1
• /
• pp.113-127
• /
• 2005

This study was aimed at developing an application method of biotope evaluation indexes to secure bird diversity on urban biotope that has high intensity of land use. The main purpose of the study was to plan the effective restoration method of sound urban biotope from the ecological aspects after evaluating the relationship between the biotope evaluation indexes. The biotope area, number of insect species, distance from adjacent road, biotope area index were surveyed on each designated site in order to analyze the evaluation indexes that influenced bird diversity in urban biotope. The analysis of the relationship between biotope evaluation. indexes showed the following results number of bird species and number of insect species > number of bird species and biotope area index > number of insect species and biotope area index, that is, the number of insect species and biotope area index had a specific effect on the bird diversity. The equation derived from the above result is 'number of bird species = 6.124 $\times$ biotope area index + 0.095 $\times$ number. of insect species - 1.197' ($R^2=0.716$, F=27.743, P<0.001). Therefore, even a small area can be helpful for promoting bird diversity in the urban area if the biotope area index and diversity of vertical landscape for insects are maintained.

• Journal of Gastric Cancer
• /
• v.3 no.2
• /
• pp.93-96
• /
• 2003

Purpose: Synthetic absorbable monofilaments offer excellent glide characteristics and cause minimal tissue trauma as a result of their smooth monofilament structure and gradual absorption within the healing tissues. For these reasons, these suture materials are commonly used in various surgical fields such as gastroenterology, urology, gynecology, and plastic surgery. The aim of this study was to evaluate the safety and usefulness of a new synthetic absorbable monofilament, Glycoside-..-caprolactone-trimethylene carbonate interpolymer (GCT), in gastrointestinal anastomosis and closure. Materials and Methods: We evaluated 55 gastrointestinal anastomoses and closures using GCT $MONOSYN^{R}$, B. Braun, Germany) in 47 patients who underwent gastric surgery between December 2001 and May 2002 at Seoul National University Hospital. Patient's characteristics, operative procedure, surgeon's opinion of handling properties of GCT, and suture-related complications were analyzed. Results: There were 34 males and 13 females (M:F= 2.6:1) with an average age of 54.2 years old. Forty-five cases of gastrointestinal anastomosis (20 gastrojejunostomies and 25 jejunojejunostomies) and 10 cases of intestinal closure (7 gastrostomy closures and 3 duodenal stump closures) were performed in 41 cases of stomach cancer, three of peptic ulcer disease, two of GIST, and one MALToma. The handling properties of GCT according to the criteria of knot breaking load, knot security, and placing property were always scored with 7 to 9 points (10=excellent, 1=very poor). Two cases of postoperative complications ($3.6\%$) were noted. One was a leak of the gastrojejunostomy site which was successfully managed conservatively, and the other was a stricture of the gastrojejunostomy site which was managed by reoperation (side-to-side jejunojejunostomy). Conclusion: GCT seems to be an applicable suture material for various gastrointestinal anastomoses and closures.

• Journal of Life Science
• /
• v.15 no.4 s.71
• /
• pp.657-663
• /
• 2005

Collagenases are generally defined as enzymes that are capable of degrading the polypeptide backbone of native collagen under conditions that do not denature the protein. An extracellular collagenase-producing bacterial strain was isolated from kimchi and identified to be Bacillus subtilis JS-17 through morphological, cultural, biochemical characteristics and 16S rDNA sequence analysis. Optimum culture condition of Bacillus subtilis JS-17 for the production of collagenase was $1.5\%$ fructose, $1\%$ yeast extract, $0.5\%\;K_2HPO_4,\;0.4\%\;KH_2PO_4,\;0.01\%\;MgSO_4\cdot7H_2O,\;0.01\%\; MnSO_4\cdot4H_2O,\;,0.1\%$ citrate and $0.1\%\;CaCl_2$. The production of collagenase was optimal at $30^{\circ}C$ for 72 hr. A collagenase was isolated from the culture filtrate of Bacillus subtilis JS-17. The enzyme was purified using Amberlite IRA-900 column chromatography, Sephacryl S-300 HR column chromatography and DEAE-Sephadex A-50 column chromatography The purified collagenase has an specific activity 192.1 units/mg. The molecular weight of the purified enzyme was estimated to be 28 kDa by SDS-PACE. The purified collagenase has $100\%$ activity up to $55^{\circ}C$.

• The Korean Journal of Air & Space Law and Policy
• /
• v.22 no.2
• /
• pp.3-25
• /
• 2007

In 2002 Republic of Korea successfully launched a self-made mined proportion rocket and it is expected that she will be able to have own space launching system by 2010. According to Article 14 of the Space Exploration Promotion Act, a new law should be established to impose the limit of compensation for the damage by space accident. Therefore, The Space Accident Liability Act was passed in Korean Congress on Nov. 22, 2007 and it will be enforced in six months. The purpose of this Act is to provide reparation for the damage of the third parties that a launch causes; and the Commonwealth should be insured against any possible space accidents to pay for such a damage. Here space accident means the damages to our life, body, and properties from the launching of space objects. There should be an actual loss to establish the compensation of Liability Act. Article 2 in Liability Act defines "damage" as follows: the term "damage" means loss of life, personal injury or loss of or damage to property of persons. Physical and material damages are included in the conception of damage. The meaning of a launching includes any test launch and launch for a real arrangement which will ultimately provides a wide range of compensation. Article 4 indicates that absolute liability should be imposed in compensating for damage by space accidents. Article 4 also indicates that a launching party should be absolutely liable to compensate for the damage caused by its space object on the surface of the Earth. In general, liability stands where fault is. But if the activity is ultra-hazardous and causes serious harm, the individual needs to compensate for the damage unlimitedly. Because of the many launchings for the Seattleite launching, a launching organization is obligated to the liability insurance in preparation for the space accidents. According to the Article 6 of Space Accident Liability Act, to be insured for the compensation for damage is obligatory. It says: "In accordance with Article 11 in the Space Exploration Promotion Act, the person who wants to receive an approval f3r launching needs to be insured in compensation for the possible damage by space accidents.

• Journal of Biosystems Engineering
• /
• v.26 no.5
• /
• pp.461-468
• /
• 2001

Impact between fruits and other materials is a major cause of product damage in harvesting and handling systems. The oriental pears are more susceptible to bruising than other fruits such as European pears and apples, and are required more careful handling. The interest in the handling of the pears for the processing systems has raised the question of the allowable drop height to which pears can be dropped without causing objectionable damage. Drop tests on pears were conducted using an impact device developed by authors to estimate the allowable drop height without bruising. The impact device was constructed to hold in a selected orientation and to release a fruit by vacuum for dropping on to a force transducer. The drop height was adjustable for zero to 60 cm to achieve the desired distance between the bottom of the fruits and the top of the impact force transducer. The transducer was secured to 150 kg$\sub$f/ concrete block. The transducer signal was sampled every 0.17 ms with a strain gage measurement board in the micro computer where it was digitaly stored for later analysis. The selected sample fruit was Niitaka cultivar of pears which is one of the most promising fruit for export in Korea. The pears were harvested during the 1998 harvest season from an orchard in Daejeon. The sample fruit was selected from two groups which were stored for 3 months and 5 months respectively by the method of current commercial practice. The pears were allowed to stabilize at environmental condition(18$^{\circ}C$, 65% rh) of the experimental room. One hundred fifty six pears were tested from the heights of 5, 7.5. 10 and 12.5 cm while measurement were made of impact peak force, contact time, time to peak force, dwell time, pear diameter and mass. The bioyield strength and modulus of elasticity were measured using UTM immediately after each drop test. The allowable drop height was estimated on the base of bioyield strength of the pears in two ways. One was assumed the peak force during impact test increasing linearly with time, and the other was based on the actual drop test results. The computer program was developed for measuring the impact characteristics of the pears and analyzing the data obtained in the study. The peak force increased while contact times decreased with increasing drop height and contact times of the sample from the hard tissue group. The allowable drop height increased with increasing bioyield strength and contact times, and also varied with Poisson\`s ratio, mass and equilibrium radius of the pears. The allowable drop height calculated by a theoretical method was in the range from 1 to 4 cm, meanwhile, the estimated drop height considering the result of the impact test was in the range from 1 to 6 cm. Since the physical properties of fruits affected significantly the allowable drop height, the physical properties of the fruits should be considered when estimating the allowable drop height.

• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.76-82
• /
• 2005

Evaporative cooling pad system is one of the main cooling methods in greenhouses and its efficiency is very high. However, it has some disadvantages such as greenhouse temperature distributions are not uniform and installation cost is expensive. In this study, a CFD simulation model f3r predicting the air temperature distribution in the fan and fad cooling greenhouse was developed. The model was calibrated and validated against experimental data and a good fit was obtained. The influence of different outside wind, fan and pad height, ventilation rate, shading, and greenhouse length, were then examined. In order to reduce the internal temperature gradients, it is desired that the prevail wind direction and the fan and pad heights are considered. The simulation indicates that high ventilation rates and shading contribute to reduce the temperature gradients in the fan and pad cooling greenhouse. In order to maintain the desired greenhouse temperature, the pad-to-fan distance should be restricted according to the design climate conditions, shading and ventilation rates. The developed CFD model can be a useful tool to evaluate and design the fan and pad systems in the greenhouses with various configurations.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.199-202
• /
• 1996

Artificial hearts are intended for use in patients with severe forms of heart disease for which no surgical repair is possible. The moving-actuator pump was developed to decrease the overall volume size of the electromechanical total artificial heart (TAH) by eliminating the occupied space of the fixed-actuator in the conventional pusher-plate type pump. In our pump, the actuator moves back and forth for alternative ejections of left and right ventricles. The problem of fitting the TAH to atrial remnants and arterial vessels could also be improved by circular or penduluous mot ion of the actuator instead of linear mot ion of the pusher-plate in the conventional pumps. We have evaluated two types of moving- actuator pump; one is a rolling cylinder type, and the other a pendulum type pump. In the rolling cylinder pump, frictional energy loss exists between the pump housing's guide bars and the actuator's end caps, while the bottom rack under the cylindrical actuator increases the height of the pump, the pump is therefor not implantable inside the small chest of human-sized animals with a body weight of less than 70kg. The new human type pump has a penduluous mot ion actuator to correct the above problems while maintaining the advantage of the moving- actuator's small total volume. The totally implantable TAH is composed of a blood pump, a control system and pheriperal equipments. The blood pump, which is constructed by a moving actuator, a right and left blood sac, and four artificial valves, is implanted in the thoracic. In 1988, the first implantation of the rolling cylinder TAH was performed into a female calf weighing 100kg, and the cal f recovered to the degree of voluntary standing and eat ing and survived to 100 hrs. We then survived two female sheep weighing about 63kg with the new human type TAH for three days.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.645-654
• /
• 1995

Porphyromonas endodontalis is a black-pigmented anaerobic Gram negative rod which is associated with endodontal infections. It has been isolated from infected dental root canals and submucous abscesses of endodontal origin. DNA probe is an available alternative, offering the direct detection of a specific microorganism. Nucleic-acid probes can be off different types: whole different: whole-genomic, cloned or oligonucleotide probes. Wholegenomic probes are the most sensitive because the entire genome is used for possible hybridization sites. However, as genetically similar species of bacteria are likely to be present in specimences, cross-reactions need to be considered. Cloned probes are isolated sequences of DNA that do not show cross-reactivity and are produced in quantity by cloning in a plasmid vector. Cloned probes can approach the sensitivity found with whole-genomic probes while avoiding known cross-reacting species. Porphyromonas endodontalis ATCC 35406 (serotype $O_1K_1$) was selected in this experiment to develop specific cloned DNA probes. EcoR I-digested genomic DNA fragments of P. endodontalis ATCC 35406 were cloned into pUC18 plasmid vector. From the E. coli transformed with the recombinant plasmid 4 clones were selected to be tested as specific DNA probes. Restriction-digested whole-genomic DNAs prepared from P. gingivalis 38(serotype a), W50(serotype b), A7A1-28(serotype C), P. intermedia 9336(serotype b), G8-9K-3(serotype C), P. endodontalis ATCC 35406(serotype $O_1K_1$), A. a Y4(serotype b), 75(serotype a), 67(serotype c), were each seperated on agarose gel electrophoresis, blotted on nylon membranes, and were hybridized with digoxigenin-dUTP labeled probe. The results were as follows: 1. Three clones of 1.6kb(probe e), 1.6kb(probe f), and 0.9kb(probe h) in size, were obtained. These clones were identified to be a part of the genomic DNA of P. endodontalis ATCC 35406 judging from their specific hybridization to the genomic DNA fragments of their own size on Southern blot. 2. The clones of 4.9kb(probe i) was identified to be a part of the genomic DNA of P. endodontalis ATCC 35406. but not to specific for itself. It was hybridized to P. gingivalis A7A1-28, P. intermedia G89K-3.

• Polymer(Korea)
• /
• v.28 no.5
• /
• pp.404-411
• /
• 2004

The microcapsules containing triphenyl phosphate (TPP), a flame retardant, were prepared by phase-inversion emulsification technique using the epoxy resin (Novolac type) with excellent physical properties and network structure. This microencapsulation process was adopted for the protection of TPP evaporation and wetting of polymer composite during the polymer blend processing. The TPP, epoxy resin and mixed surfactants were emulsified to oil in water (O/W) by the phase inversion technology and then conducted on the crosslinking of epoxy resin by in-situ polymerization. The capsule size and size distribution of TPP capsules was controlled by mixed surfactant ratio, concentration and TPP contents, The formation and thermal property of TPP capsules were measured by differential scanning calorimetry and thermogravimetric analysis. The morphology and size of TPP capsules were also investigated by scanning and transmission electron microscopies. As the surfactant concentration increased, the TPP capsules were more spherical and mono-dispersed at the same weight ratio of mixed surfactants (F127: SDBS).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.78-78
• /
• 2000

다결정 실리콘-게르마늄 (poly-SiGe)은 태양전지 개발에 있어서 중요한 물질이다. 우리는 소량의 Ge(x=0.05)으로부터 다량의 Ge(x=0.67)을 함유한 수소화된 비정질 실리콘-게르마늄 (a-SiGe:H) 박막의 고상결정화 과정을 ESR (electron spin resonance)방법으로 조사해보았다. 먼저 PECVD 방법으로 Corning 1737 glass 위에 a-Si1-xGex:H 박막을 증착시켰다. 증착가스는 SiH4, GeH4 가스를 썼으며, 기판온도는 20$0^{\circ}C$, r.f. 전력은 3W, 증착시 가스압력은 0.6 Torr 정도이었다. 증착된 a-SiGe:H 박막은 $600^{\circ}C$ N2 분위기에서 다시 가열되어 고상결정화 되었고, 결정화 정도는 XRD (111) peak의 세기로부터 구해졌다. ESR 측정은 상온 x-band 영역에서 수행되었다. 측정된 ESR스팩트럼은 두 개의 Gaussian 함수로써 Si dangling-bond와 Ge dangling-bond 신호로 분리되었다. 가열 초기의 a-SiGe:H 박막 결함들의 스핀밀도의 증가는 수소 이탈에 기인하고, 또 고상결정화 과정에서 결정화된 정도와 Ge-db 스핀밀도의 변화는 서로 깊은 상관관계가 있음을 알 수 있었다. 특히 Ge 함유량이 큰 박막 (x=0.21, 0.67)에서 뿐만 아니라 소량의 Ge이 함유된 박막(x=0.05)에서도 Ge dangling-bond가 Si dangliong-bond 보다 고상결정화 과정에서 더 중요한 역할을 한다는 것을 알수 있었다. 또한 초기 열처리시 Si-H, Ge-H 결합에서 H의 이탈로 인하여 나타나는 Si-dangling bond, Ge-dangling bond 스핀밀도의 최대 증가 시간은 x 값에 의존하였는데 이러한 결과는 x값에 의존하는 Si-H, Ge-H 해리에너리지로 설명되어 질 수 있다. 층의 두께가 500 미만인 커패시터의 경우에 TiN과 Si3N4 의 계면에서 형성되는 슬릿형 공동(slit-like void)에 의해 커패시터의 유전특성이 파괴된다는 사실을 알게 되었으며, 이러한 슬릿형 공동은 제조 공정 중 재료에 따른 열팽창 계수와 탄성 계수 등의 차이에 의해 형성된 잔류응력 상태가 유전막을 기준으로 압축응력에서 인장 응력으로 바뀌는 분포에 기인하였다는 사실을 확인하였다.SiO2 막을 약화시켜 절연막의 두께가 두꺼워졌음에도 기존의 SiO2 절연막의 절연 파괴 전압 및 누설 전류오 비교되는 특성을 가졌다. 이중막을 구성하고 있는 안티퓨즈의 ON-저항이 단일막과 비교해 비슷한 것을 볼 수 잇는데, 그 이유는 TiO2에 포함된 Ti가 필라멘트에 포함되어 있어 필라멘트의 저항을 감소시켰기 때문으로 사료된다. 결국 이중막을 구성시 ON-저항 증가에 의한 속도 저하 요인은 없다고 할 수 있다. 5V의 절연파괴 시간을 측정한느 TDDB 테스트 결과 1.1$\times$103 year로 기대수치인 수십 년보다 높아 제안된 안티퓨즈의 신뢰성을 확보 할 수 있었다. 제안된 안티퓨즈의 이중 절연막의 두께는 250 이고 프로그래밍 전압은 9.0V이고, 약 65$\Omega$의 on 저항을 얻을수 있었다.보았다.다.다양한 기능을 가진 신소재 제조에 있다. 또한 경제적인 측면에서도 고부가 가치의 제품 개발에 따른 새로운 수요 창출과 수익률 향상, 기존의 기능성 안료를 나노(nano)화하여 나노 입자를 제조, 기존의 기능성 안료에 대한 비용 절감 효과등을 유도 할 수 있다. 역시 기술적인 측면에서도 특수소재 개발에 있어 최적의 나노 입자 제어기술 개발 및 나노입자를 기능성 소재로 사용하여 새로운 제품의 제조와 고압 기상 분사기술의 최적화에 의한 기능성 나노 입자 제조 기술을 확립하고 2차 오염 발생원인 유기계 항균제를 무기계 항균제로 대체할 수 있다. 이와 더불