• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.269-273
• /
• 2003

There is a growing interest to replace the commercial steels with non-heat treated steels, which does not involve the spheroidization and quenching-tempering treatment. However, Non-heat treated steels should satisfy high strength and good formability without performing heat treatment. Therefore, it is important to investigate optimum materials showing a good combination of strength and formability after the drawing process. In this study, Dual-Phase Steels were studied as candidate materials for non-heat treated steels, which have different martensite morphologies and volume fractions obtained through heat-treatment of intercritical quenching (IcQ), intermediate quenching (ImQ) and step quenching (SQ). The mechanical properties of DP steels were measured by tension and compression tests. Also, the cold formability of three DP steels which have similar tensile strength value was investigated by estimating the deformation resistance and the forming limit. The deformation resistance which is important factor in determining die life was estimated by calculating the deformation energy. And the forming limit was estimated by measuring the critical strain revealing crack initiation at the notch tip of the specimens.

• 한국조명전기설비학회지:조명전기설비
• /
• 제6권5호
• /
• pp.27-37
• /
• 1992

We studied the dielectric and dynamic mechanical losses according to the quenching condition in low density polyethylene being used to power cables. According to severe quenching condition, characteristics of the temperature in internal friction los peak have decreased the magnitude of loss peak as amorphous region lengthen. From now on, the frequency dependent characteristics of dielectric loss have investigated at room temperature, and the dielectric loss peak due to interface polarization, between crystal and amorphous region, occurs about 30[Hz], and that, the peak due to orientation polarization in correspondence to the loss peak in internal friction has observed at about 3 [MHz]. As quenching velocity increased, the effect on quenching condition about the dielectric loss has decreased the magnitude of the loss peak. Thus, estimation has been carried out on the activation energies nd the degree of crystallinity by means of X-ray diffraction are obtained as follows: room quenching : 26.4 [kal/mole] and 54.73 [%], ice quenching : 25.6 [kcal/mole] and 48.47 [%], liquid nitrogen quenching specimens : 22.56 [kcal/mole] and 40.95 [%].

• 대한화학회지
• /
• 제42권1호
• /
• pp.22-27
• /
• 1998

여러 가지 용매에서 N,N-dimethylaniline에 의한 coumarin 153과 coumarin 481분자의 형광소광효과를 조사하였다. 소광속도상수와 분자의 확산속도상수간의 관계로부터 소광과정이 분자의 확산과 어느정도 상호연관성을 갖고 있음을 알 수 있었다. slip boundary조건 보다stick boundary 조건을 적용하였을 때 분자확산 속도상수와 실험적인 소광속도상수와의 차이가 작게 나타났다. cyclohexane 과 같은 비극성용매에서의 소광속도 상수는 이론적인 확산속도상수 값과 오차범위 내에서 거의 일치하였으나 acetonitrile과 같은 극성용매에서는 소광속도상수는 확산속도상수보다 일관되게 작게 나타났다. 이것은 coumarin 분자의 형광소광이 분자간 확산에 의한 충돌 뿐만 아니라 분자내 전하분리와 같은 과정에 의해서도 진행되는 것으로 해석할 수 있다.

• 소성∙가공
• /
• 제13권1호
• /
• pp.84-89
• /
• 2004

There is a growing interest to replace the commercial steels with non-heat treated steels, which does not involve the spheroidization and quenching-tempering treatment. However, Non-heat treated steels should satisfy high strength and good formability without performing heat treatment. Therefore, it is important to investigate optimum materials showing a good combination of strength and formability after the drawing process. In this study, Dual-Phase Steels were studied as candidate materials for non-heat treated steels, which have different martensite morphologies and volume fractions obtained through heat-treatment of intercritical quenching (IcQ), intermediate quenching (ImQ) and step quenching (SQ). The mechanical properties of DP steels were measured by tension and compression tests. Also, the cold formability of three DP steels which have similar tensile strength value was investigated by estimating the deformation resistance and the forming limit. The deformation resistance which is important factor in determining die life was estimated by calculating the deformation energy. And the forming limit was estimated by measuring the critical strain revealing crack initiation at the notch tip of the specimens.

• Food Science and Biotechnology
• /
• 제18권2호
• /
• pp.526-532
• /
• 2009

Quenching mechanisms and kinetics of $\alpha$-, $\beta$-, $\gamma$-, and $\delta$-tocopherol in photosensitized oxidation of lard were studied. Lard at 0.03, 0.07, 0.11, and 0.3 M in methylene chloride containing $4.4{\times}10^{-6}\;M$ chlorophyll and 0, 0.1, 0.3, and 0.6 mM $\alpha$-, $\beta$-, $\gamma$-, and $\delta$-tocopherol were stored under light for 4 hr, respectively. Oxidation was determined by headspace oxygen and peroxide value. Tocopherols prevented the photosensitized oxidation of lard (p<0.05). Steady state kinetic study showed that $\alpha$-, $\beta$-, $\gamma$-, and $\delta$-tocopherol prevented the photosensitized oxidation of lard by quenching singlet oxygen. Singlet oxygen quenching rates of $\alpha$-, $\beta$-, $\gamma$-, and $\delta$-tocopherol by headspace oxygen depletion were 1.86, 2.39, 2.47, and $2.11{\times}10^7/M/sec$, respectively. The quenching rates of $\alpha$-, $\beta$-, $\gamma$-, and $\delta$-tocopherol by peroxide value were 1.42, 1.11, 0.97, and $0.42{\times}10^7/M/sec$, respectively. The quenching rates of tocopherols were slightly different depending on the measurements of oxidation.

• 한국생산제조학회지
• /
• 제7권3호
• /
• pp.79-84
• /
• 1998

It is very difficult to analyze the transient temperature distribution during quenching of the steel because of coupled effects among temperature, structures and stresses. In this paper, using Inoue's equation of evolution and mixture rule, transient temperature distribution is calculated by the finite element method considering latent heat of transformation structure and temperature dependence of physical and mechanical prperties for the 0.45% carbon cylindrical steel bar with 40mm diameter and 20mm height during end-quenching.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3593-3596
• /
• 2012

The water-soluble conjugated polymer with fluorescence quenching as a result of electrostatic interaction and aggregation was synthesized through Suzuki polymerization. The absorption and emission of anionic polymer (a-PFP) is blue shifted as compared with cationic polymer (c-PFP) although getting same backbone, and the absolute PL quantum efficiency of a-PFP in water is over 90% due to good solubility in aqueous solution. We anticipate that the fluorescence quenching of anionic and cationic polymers, with same conjugated backbone, could be shown in aqueous solution.

• Journal of Photoscience
• /
• 제9권3호
• /
• pp.75-79
• /
• 2002

Solubility of carbon tetrachloride ($CCl_4$) in water increases appreciably in presence of $\beta$-cyclodextrin ($\beta$CD). $CCl_4$ is a very good quencher of 1-naphthol (1ROH) fluorescence. By studying the quenching of fluorescence of 1ROH included in $\beta$CD cavity, it was found that there is an increase in the availability of $CCl_4$ around $\beta$CD in the aqueous medium. This could help to rationalize the enhanced solubility of $CCl_4$.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제12권6호
• /
• pp.53-59
• /
• 2007

액체섬광계수기(liquid scintillation counter: LSC)를 이용한 지하수 $^{14}C$의 측정에서 휘발성유기화합물(volatile organic compounds: VOC)에 따라 소광효과(quenching effect)를 정확하게 보정할 수 있는 최적 소광곡선(quenching curve)의 작성조건을 조사하였다. 우선, VOC에 따른 소광효과를 알기 위하여 benzene, toluene, ethylbenzene, o-(m-,p-)xylenes, trichloroethylene(TCE)과 tetrachloroethylene(PCE), carbon tetrachloride, chloroform과 같은 주요 지하수오염유기물에 의한 소광인자(spectral quench parameter of the external standard, SQP(E))를 측정하였다. 소광곡선은 $^{14}C$ 표준용액과 chloroform 소광시약을 이용하여 작성하였으며 $^{14}C$ 표준용액의 비방사능(specific activity, dpm/mL), LSC 측정시간, 소광시약 농도 등의 최적조건을 도출하였다. 소광효과는 분자 내에 염소원자를 포함하지 않는 BTEX(benzene, toluene, ethylbenzene, o-(m-,p-)xylenes) 보다 염소원자를 포함하는 TCE, PCE, carbon tetrachloride와 chloroform에서 매우 높게 나타났다. 실험에서는 여건상 $^{14}C$ 비방사능이 7,000 dpm/mL 정도의 표준용액을 사용하였는데 이 경우 LSC측정시간은 100분, 소광시약으로 chloroform을 사용할 경우 수 mL의 첨가량이 적당하였다. 이러한 조건으로 BTEX(benzene, toluene, ethylbenzene, m-xylene)에 대해 작성한 소광곡선의 상관계수(coefficient of correlation)는 0.99이상으로 통계학적으로 신뢰할 수 있는 값을 얻을 수 있었으며 이 소광곡선을 지하수와 수돗물의 $^{14}C$ 측정에 적용한 결과 표준용액의 비방사능 값과 잘 일치하여 연구결과의 유효성을 확인할 수 있었다.

• Journal of Photoscience
• /
• 제4권3호
• /
• pp.97-103
• /
• 1997

The effect of temperature on the fluorescence quenching of 2-(4-Methoxyphenyl)-5-(1-naphthyl)-1,3,4-oxadiazole (MPNO1), 2-(4-Methoxyphenyl)-5-(2-naphthyl)-1,3,4-oxadiazote(MPNO2), by aniline, and 2-Phenylindole (2-PI) by CCk, in toluene by steady state method and in benzene by time-resolved method have been carried out in the temperature range 30 - 70$\circ$C. The Stem-Volmer (S-V) plots, I$_0$/I against quencher concentration [Q] at different temperanares show positive deviations. The fluorescence lifetimes determined at different temperatures show no systematic variations and the variations being within the experimental error, the average values of lifetimes $ $\tau$ (t) are taken for further calculations. Rate constants such as Stem-Volmer quenching constants K$_sv}$, quenching rate parameters k$_q$ and k'$_q$, static quenching constant V and kinetic distance r are determined using the modified Stem-Volmer equation and sphere of action static quenching model. In order to see whether the reactions are diffusion limited, equations k$_q$ = e$^{-Eq/RT}$ and k'$_q$ = e$^{-Eq/RT}$ are used to determine the values of E$_q$ and E'$_q$, the activation energies for collisional quenching and the values of E$_q$ are 14.53. 17.28 and 16.20 kJ mole$^{-1}$ for MPNO1, MPNO2 and 2-PI respectively and the values of E'$_q$ are 14.62 and 17.73 for MPNO1 and MPNO2 respectively. From the magnitudes of various quantities it has been concluded that the reactions are diffusion limited and the observed positive deviations in the S-V plot are due to static and dynamic quenching.