• 한국물환경학회지
• /
• 제22권4호
• /
• pp.648-657
• /
• 2006

Characteristics of water quantity and quality of the Anyangcheon were analyzed through many field measurements and the distributed hydrologic simulation model, Soil and Water Assessment Tool (SWAT). Event mean concentrations (EMCs) and baseflow mean concentrations were calculated from the data and the daily runoff were simulated by SWAT. The runoff was divided into the direct runoff and the baseflow. Using those values and quantity and quality data of release from the wastewater treatment plant (WWPT), unit loads of BOD, COD, SS, $NO_2-N$, $NO_3-N$, $NH_3-N$, and Dis-P were derived. EMCs of BOD and SS were even higher than the baseflow mean concentrations. The total runoff from October to April (7 months) of 2004 was just 13.5%, since the rainfall usually is concentrated in summer season. Futhermore BOD and SS were loaded during the event by 50.9% and 70.9%, respectively and over three quarters of total COD, $NO_2-N$, $NO_3-N$, $NH_3-N$, and Dis-P were flowed into the Anyangcheon during the remaining period. Therefore, the efficiency of WWPT for COD, $NO_2-N$, $NO_3-N$, $NH_3-N$, and Dis-P should be intensified from Oct. to Apr. and the runoff quality management of BOD and SS should be planned during the summer season.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제9권1호
• /
• pp.33-38
• /
• 2020

본 논문에서는 드론에 의하여 획득된 영상을 분석하여 건축자재의 수량을 측정하는 기술을 제안한다. 제안하는 기술은 드론 및 카메라 정보가 담겨있는 드론 로그와 영상 내 건축자재더미 종류와 영역을 예측하는 RCNN, 실제적인 수량 계산을 위한 사진측량법을 사용한다. 기존 연구에선 학습 데이터의 부족으로, 자재 종류 및 건축자재더미 영역 예측 정확도의 오류 범위가 컸다. 논문에서는 이러한 오류 범위를 줄이고 예측 안정성을 높이기 위해 자료 증가 방법으로 학습 데이터를 증가시킨다. 자료 증가는 학습 모델의 과적합을 막기 위해 회전에 의한 증가 방법만 사용한다. 수량 계산 방법으로는 Yaw, FOV 등의 드론 및 카메라 정보가 담겨있는 드론 로그와 영상 내 건축자재더미 영역을 찾고, 종류를 예측해 줄 RCNN 모델을 사용하고, 이 모든 정보를 종합해 논문에서 제안하는 수식에 적용하여 자재더미의 실제적인 수량을 계산한다. 제안하는 방법의 우수성은 실험을 통하여 확인한다.

• 한국컴퓨터정보학회논문지
• /
• 제24권10호
• /
• pp.11-23
• /
• 2019

본 연구에서는 토목분야의 다양한 상용 BIM 모델링 설계 소프트웨어의 사용자들에게 상호 호환성과 상호 운용성을 보장하기 위해 BIM 국제 표준 파일 포맷인 IFC 파일로의 파일 변환 프로세스를 새롭게 설계하여 제시한다. 제안된 프로세스는 상용 BIM 모델링 소프트웨어를 위한 add-in 방식의 컨버터(Converter)를 사용하여, 변환되는 IFC 파일의 3차원 객체 형상 정보에 수량 산출식 코드 속성과 토목 분야 CBS/OBS/WBS 표준분류체계 속성으로 구성되는 추가적인 속성들을 삽입한다. 또한, 개방형(Open) 웹 기반 수량, 공정(4D) 및 공사비(5D) 관리를 위한 IFC 파일의 통합 활용 프로세스를 추가로 설계하고 구축한다. 이러한 작업을 통해 토목 분야의 BIM 모델링 설계 단계에서 최종적인 시공 단계에 이르는 개방형 웹 기반 수량, 공정(4D) 및 공사비(5D)의 연계적 활용에 대한 새로운 프로세스를 제시하는 것이 본 연구의 궁극적인 목적이다.

• 한국인터넷방송통신학회논문지
• /
• 제13권3호
• /
• pp.135-140
• /
• 2013

본 연구에서는 매립장의 체적관리를 위한 체적 모니터링 시스템 구현에 대한 연구에 대해 논의한다. 레이저 로봇 기술에 기반한 삼차원 스캐너를 제작하여 삼차원 물체의 표면에 대한 포인트 클라우드(point cloud)를 이용한 매립장의 쓰레기 체적 감시 시스템을 제안하였다. 이를 통해 연속적으로 매립장의 쓰레기 체적 변화를 감시할 수 있게 되었으며 매립장 수명의 가용한 쓰레기 매립 수명을 예측할 수 있게 되었다. 그리고 완성된 매립장 체적 감시 시스템은 안성시 매립장에 구현되었다.

• 대한지하수환경학회지
• /
• 제2권1호
• /
• pp.38-47
• /
• 1995

이 연구에서는 삼척탄전 내에 위치하는 폐탄광인 동해탄광을 대상으로 산성 광산폐수의 중화 처리를 위한 각종 기초자료를 제시하고자 하였다. 산성 광산폐수의 측정시기에 따른 변화양상을 관찰한 결과 갈 수기에는 각종 잠재적 유독성 원소들의 함량이 증가하며, pH가 하락하여 수질이 악화되는 경향을 보였다. 공업용 소석회는 처리효율 및 경제성을 고려할 경우 산성 광산폐수의 처리를 위한 최적의 중화제로 판단되며, 평형 모델링 결과 중화처리과정에서 Fe는 FeOOH의 형태로, Al은 Al(OH)$_3$, 의 형태로 침전되는 것으로 추정된다. GIS를 이용하여 동해탄광일대 산성 광산폐수 처리시설의 위치를 제시하였으며 수문학적 자료를 이용하여 최대강우량 및 첨두유량을 계산하였다.

• 산업경영시스템학회지
• /
• 제31권3호
• /
• pp.117-124
• /
• 2008

Ultra-high voltage transformer industry has characteristic of small quantity batch production system by other order processing unlike general mass production systems. In this industry, observance of time deadline is very important in market competitive power security and company continued existence. The transformer winding is a process that rolls a coil is coated with an electric insulation material in order to generate the required voltage using the voltage fluctuation. The winding process is very important production process in the extra-high voltage transformer manufacturing industry because winding process is core process that occupy weight about half of whole process and is process that decide current ratio of transformer. This paper proposes a statistical calculation and control method of planned leadtime on the basis of real data and informations for the A company in transformer winding process. Moreover, we develop unit process scheduling system.

• 상하수도학회지
• /
• 제28권1호
• /
• pp.33-45
• /
• 2014

In this study, current sewer infiltration/Inflow(I/I) computation and application method was examined about improvement and adequacy relating to the main issues raised by the field for practitioners. The results of review about infiltration calculation method were considered to be in need of improvement at 'standards of minimum sewage calculation'. Furthermore, the results of review about I/I application method were considered to be in need of improvement at 'standards of seasonal infiltration application' and 'the relative decrease in the Annual evaluation standards'. In addition, annual I/I analysis at JC County for the four years(2009~2012) in respect of operation flow and rainfall data was conducted. The result of annual infiltration analysis, compared average daily sewage generated average infiltration rate was found in 21.95 %, infiltration by unit was found in $0.31m^3/day/cm/km$ and $0.12m^3/day/day$, respectively. The result of annual inflow analysis, average rainfall - Inflow equations was found $y=5.499{\times}$($R^2$ 0.793), and the average Inflow quantity by sewer extension was predicted to $0.66m^3/mm-km$.

• 교육시설
• /
• 제16권1호
• /
• pp.33-41
• /
• 2009

The purpose of this study is to provide a basis for calculation of school operation fees for normal functioning of the school facilities, and facility maintenance and repair cost through their life spans, considering remodeling of the facilities and changes of their functions. This study analyzes maintenance and repair records during the three years from 2003 to 2005 in primary, middle and high schools in Incheon Metropolitan city and also the facility management and operation expenditure of the same schools in the city during the year of 2005, and presents quantified unit cost of each item according to the area, the age of the facilities, and the number of classroom, student, and lessons given. The calculation can be a basis for both BTL school facility managers and the general school facility mangers to budget school facility maintenance cost appropriately and the quantity of energy, water, electricity, and telephone fees calculated here can be a criteria for the managers to check the normal maintenance of their facility.

• 한국군사과학기술학회지
• /
• 제19권3호
• /
• pp.302-310
• /
• 2016

An underground ammunition facility requires less quantity distances than the aboveground counterpart. However, chamber blast doors which resist the high blast-pressures are necessary for prevention of the consecutive explosions when an accident explosion occurs at any chamber. This paper aims to propose an procedure for calculation of the design loads for the chamber blast doors. Modeling considerations are drawn through analyzing the influences of the geometrical shapes and mechanical properties of rocks on the propagation of pressure wave along with the tunnels. Additionally, the design loads for the chamber blast doors in a newly-built underground ammunition facility are calculated based on the proposed procedure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.965-967
• /
• 2003

Fuzzy Controller is a system that displays a person's thoughts using membership function and IF-THEN rules. With the help of specialists' knowledge, rule bases can be explained in easy language. Furthermore Fuzzy Controller has strong resistance against turbulence. Its performance is especially prominent when targets cannot be measured in mathematic methods because the fuzzy controller can measure the output using only the relations between the input and output. With the increasing influence of multimedia on our daily lives, vision plays bigger role both in industries and personal lives. Like wise vision is being used in many areas such as detecting and identifying objects. It is difficult to detect and control targets because there is a delay in the calculating when using vision in detecting and controlling objects in large quantity. In this paper we showed how to use fuzzy controller in minimizing the calculation process, controlling target objects and moving view window instead of applying input variation through vision. Ball beam, which has strong nonlinear, was used as the target object and DSP320C6711 IDK by TI(Texas Instruments) company was for the benefit of speedy calculation and vision data operation.