• Journal of Korean Academy of Dental Administration
• /
• v.6 no.1
• /
• pp.11-18
• /
• 2018

The aim of this study was to evaluate the competency of the Easyperio test, a genetic test method based on real time PCR for the detection of bacteria that cause dental caries and periodontal disease. To verify the validity of this text, various dental health evaluations were administered to 33 boys between the ages of 12 to 14, as this age group commonly experiences dental caries. These evaluations included a dental caries experience survey, a first molar health evaluation, the Dentocult Streptococcus mutans (SM) strip mutans, the Dentocult Lactobacillus spp (LB) test, and the Easyperio test. The correlation coefficients between the level of the Dentocult SM strip mutans and the dental caries experience were DT (R=0.570, p=0.001), DMFT (R=0.376, p=0.031), and first molar health (R=-0.395, p=0.023). The correlation coefficients between the amount of SM in the Easyperio test and dental caries experience were DT (R=0.528, p=0.002), DMFT (R=0.369, p=0.035), and first molar health (R=-0.426, p=0.013). The correlation coefficients between the level of the dentocult SM strip mutans and the SM amounts of the Easyperio test were S.mi (R=0.564 p=0.001) and S.mu (R=0.621, p=0.002). The correlation coefficients between the level of the Dentocult LB test and the SM amount of Easyperio test was S.mi (R=0.495, p=0.003). In conclusion, Easyperio test may be an easy and effective method for the differentiation and diagnosis of dental caries through quantitative and qualitative analysis of oral bacteria.

• Physical Therapy Korea
• /
• v.28 no.3
• /
• pp.208-214
• /
• 2021

Background: The CKCUES test evaluates the functional performance of the shoulder joint. The CKCUES test scores CKC exercises of the upper limbs to examine shoulder stability. Although the CKCUES test provides quantitative data on functional ability and performance, no study has determined the relationship between CKCUES scores and SA and TB muscle strength. Objects: The objective of this study is to determine the relationship between the CKCUES test scores and the strength of the SA and TB muscles in the CKCUES and unilateral CKCUES tests. Methods: Sixty-six healthy male volunteers participated in the study. A Smart KEMA strength sensor measured SA and TB muscle strength. Two parallel lines on the floor indicated the initial hand placement to start CKCUES tests. For 15 seconds, the subject raises one hand and reaches over to touch the supporting hand, then returns to the starting position. Results: The correlation between the CKCUES test scores and the strength of the SA was strong (r = 0.650, p < 0.001), and the TB was moderate (r = 0.438, p < 0.001). The correlation between the unilateral CKCUES test and the strength of the SA of the supporting side was strong (r = 0.605, p < 0.001), and swing side was strong (r = 0.681, p < 0.001). The correlation between the unilateral CKCUES test and the strength of the TB of the supporting side was moderate (r = 0.409, p < 0.001), and swing side was moderate (r = 0.482, p < 0.001). Conclusion: Our study showed that the CKCUES test had a strong association with isometric strength of SA and moderate association with that of TB. These findings suggest that the CKCUES test can evaluate the function of the SA. Moreover, the unilateral CKCUES test can evaluate unilateral shoulder function.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.5
• /
• pp.77-82
• /
• 2024

The test set of machine learning consists of the remaining data that did not participate as training data. It is quantitative division and it is setting aside a certain amount of data which has the same effect as random selection. However from a software testing perspective, test cases sufficient to catch errors are selected as a test set rather than a random selection. This is called the adequacy of the test case, and the higher the adequacy, the better the test case is selected. We want to examine whether the test cases used in machine learning are sufficient from this perspective by comparing them with the equivalence split method of software testing. If higher sufficiency is guaranteed when applying a software test design technique, that is, equivalence splitting, high effectiveness can be achieved with a small number of test sets. This reduces the size of the test set, thereby increasing the size of the training data set and ultimately securing more data to learn. It can be expected that more sophisticated models can be built with larger training data sets.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.12
• /
• pp.2565-2573
• /
• 2002

A basic research was performed to ensure the usefulness of Small Punch-creep(SP-creep) test for residual life evaluation of heat resistant components effectively. This paper presents analytical results of initial stress and strain distributions in SP specimen caused by constant loading for SP-creep test and its experimental correlations with uniaxial creep(Ten-creep) test on 9Cr1MoVNb steel. It was shown that the initial maximum equivalent stress, ${\sigma}_{eq{\cdot}max}$ from FE analysis was correlated with steady-state equivalent creep strain rate, ${\epsilon}_{qf-ss'}$ rupture time, $t_r$, activation energy, Q and Larson-Miller Parameter, LMP during SP-creep deformation. The simple correlation laws, ${\sigma}_{sp}-{\sigma}_{TEN}$, $P_{sp}-{\sigma}_{TEN}\; and\; Q_{sp}-Q_{TEN}$ adopted to established a quantitative correlation between SP-creep and Ten-creep test data. Especially, the activation energy obtained from SP-creep test is linearly related to that from Ten-creep test at $650^{\circ}C$ as follows : $Q_{SP-P}\;{\risingdotseq}\;1.37 \;Q_{TEN},\; Q_{SP-{\sigma}}{\risingdotseq}1.53\; Q_{TEN}$.

• Herbal Formula Science
• /
• v.19 no.1
• /
• pp.183-194
• /
• 2011

Objectives : To estimate the shelf-life by long-term storage test of Pyungwi-san. Methods : Experiments were conducted to evaluate the stability such as the selected physicochemical, heavy metal, microbilogical experiment under an acceleration test and long-term storage test of Pyungwi-san in different storage under room temperature, refrigeration and freezing. Futhermore, HPLC analysis was performed for the determinations of glycyrrhizin in the Pyungwi-san on an Inertsil ODS-3 column(250 mm ${\times}$ 4.6 mm, 5 um) using solvent 35% acetonitrile include 0.05% phosphoric acid at 254 nm. The flow rate was 1.0 mL/min. Results : The significant change was not showed in pH, heavy metal, microbiological, identification test and quantitative analysis based on acceleration test and long-term storage test. Retention time of glycyrrhizin in HPLC chromatogram was about 16.065 min and calibration curve showed good linearity($R^2$ = 0.9999). The contents of glycyrrhizin in acceleration test and long-term storage test were 0.068~0.076 mg/mL and 0.066~0.077 mg/mL, respectively. Shelf-lifes of room temperature, refrigeration and freezing by long-term storage test were predicted 41, 24 and 34 months, respectively. Conclusions : The suggested shelf-life would be helpful on the storage and distribution of herbal medicine.

• Journal of Surface Science and Engineering
• /
• v.36 no.4
• /
• pp.307-316
• /
• 2003

Salt spray, CASS(copper accelerated acetic salt spray) and EC(electrolytic corrosion) tests were performed in order to evaluate the corrosion resistance of plated Ni and Ni-Cr layers on Fe substrate. Compared with the conventional methods such as salt spray and CASS, the electrochemical method such as EC test may be beneficial in terms of test time span and quantitative accuracy. Furthermore, EC test can also become the alternative method to evaluate the resistance to corrosion of coatings by measuring the corrosion potentials of the coated layers in the electrolyte during the off-time of EC cycles. Compared with the corrosion potentials of pure iron, nickel, chromium, those potentials of coated layers can be used to anticipate the extent of corrosion. Results showed that in terms of the test time span, EC test gave 14 times and 21 times faster results than the salt spray test in cases of $5\mu\textrm{m}$ Ni and $20\mu\textrm{m}$ Ni plated layers, respectively. In addition, EC test also offered the shorter test time span than CASS test in cases of $5 \mu\textrm{m}$ Ni + $0.5\mu\textrm{m}$ Cr, and $20\mu\textrm{m}$ Ni + $0.5\mu\textrm{m}$ Cr on Fe substrate by 78 times and 182 times, respectively. Therefore, EC test can be regarded as the better method to evaluate the resistance to corrosion of coated layers than the conventional methods such as salt spray and CASS.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3 s.33
• /
• pp.92-99
• /
• 1999

High temperature and pressure materials in power plant are degraded by creep damage, if they are exposed to constant loads for long times, which occurs in load bearing structures of pressurized components operationg at elevated temperatures. Many conventional measurement techniques such as replica method, electric resistance method, and hardness test method for measuring creep damgage have been used. So far, the replica method is mainly used for the inspection of high temperature and pressure components. This technique is, however, restricted to applications at the surface of the testpieces and cannot be used to material inside. In this paper, ultrasonic evaluation for the detection of creep damage in the form of cavaties on grain boundaries or intergranular microcracks were carried out. And the absolute measuring method of quantitative ultrasonic velocity technique for Cr-Mo material degradation was analyzed. As a result of ultrasonic tests for crept for specimens, we founded that the sound velocity was decreased as increase of creep life fraction(${phi}c$) and also, confirmed that hardness was decreased as increase of creep life fraction(${phi}c$).

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3059-3064
• /
• 2011

A Trolley line is a very important equipment among electric railway equipments since it contacts directly with pantograph and supplies electricity on the electromotive. Such it was thought that a trolley line need not to consider fatigue since the replace cycle by wear is shorter than the replace cycle by fatigue breakage. But, the bending fatigue breakage accidents occurred several times at the Shinkansen trolley line in East Japan Railway Company. Therefore, in case of a new developed trolley line, the evaluation for bending fatigue life became more important, But, since there are not an authorized fatigue test method and a testing device for the trolley line, the quantitative evaluation is difficult. In this study, we analyzed the load and environment condition of trolley line used in the actual spot and the developed testing device that can evaluate bending fatigue properties of the trolley line as simulating the real condition. The bending fatigue test of the trolley line was achieved using the developed testing device and estimated the fatigue life of trolley line and also, established the fatigue test process.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1139-1144
• /
• 2019

A calibration system for diagnosing and confirming the performance of precision measuring instruments minimizes the risk of misjudgment of calibration resulted by complying with international standard requirements in order to ensure the reliability of calibration results. This paper uses a proposed calibration system suitability assessment and a guard-band technique through an analysis of uncertainty factors when it is impossible to acquire and operate high-performance equipment at a calibration laboratory, and proposes an optimized test limit output model substituting performance standards. The proposed method provides an optimized test standard to meet the quantitative evaluation criteria of the calibration system and the probability of false acceptance risk required by international standards.

• Journal of Chest Surgery
• /
• v.28 no.8
• /
• pp.731-741
• /
• 1995

Cardiac valve allografts have been used as replacements for diseased valves and right ventricular outflow tract reconstruction, the long term follow-up of which has been reported satisfactory. For a good long-term result, it is essential that the allograft be viable at implantation. In this study, we aimed at preparing the cardiac valve allografts aseptically, preserving them at cold- and cryo-conditions, and testing the viability of the allografts after preservation by four methods. We tested the viability of the cardiac valve allografts preserved in cold refrigerated state[4$^{\circ}$C in nutrient media & in liquid nitrogen tank[cryopreservation under -149$^{\circ}$C for pre-planned time periods. The testing methods were 1 glucose utility test 2 tissue culture 3 thymidine uptake test and 4 histologic evidence by light microscopy. We observed no differences in the viability between cold- & cryo-groups and similar results among the methods for testing the viability. In conclusion, there was no difference in the viability between cold- and cryopreserved-allografts at least for 14 days of preservation. And glucose utility test and thymidine uptake test were satisfactory in the evaluation of the allograft viability, since they were easy and rapid with relatively quantitative results.