Objective: There have not been so many study about the quality of acupuncture needle tip. In order to ensure safe acupuncture treatment, the quality of needle tip is essential. Therefore we investigated the current condition of the tip of the acupuncture needles in Korea. Methods: We have selected the needles that made by 8 companies in Korea, and selected 50 pieces from 1000 pieces each company by randomized methods. and observed the tip of each needle using a scanning electron microscope at ${\times}800$ magnification. Results & Discussion: We found that needles had several defects such as scratch marks on the surface, metallic scuff, lumps and irregularities of the needle tips, stubbed or malformed tips, tips of point off-center, peeled off coated tips. There was much difference on the quality of needle among the manufacturer, and some needles seem to need to do- thorough quality control. It is necessary to intensify quality management and a concentrated control on manufacturing process of acupuncture needles.
Objectives : The objective of this review was to evaluate clinical trials of warming acupuncture for musculoskeletal pain diseases, to assess the methodologic quality of the trials and determine whether low-quality trials are associated with positive outcomes, to document adverse effects and to identify the effectiveness of the warming acupuncture. Methods : Seven databases and the Journal ZHONGGUO ZHENJIU(中國鍼灸) published between 2004-2008 were searched. Korean and Chinese randomized trials were evaluated for methodologic quality using the modified Jadad scale. Outcome measurements were pain, function and global improvement. The best-evidence synthesis was performed to determine the strength of evidence by control group. Results : Six clinical trials representing 564 patients with musculoskeletal pain diseases were identified. For pain and function, there was moderate evidence that warming acupuncture is more effective than manual acupuncture. For patient global assesment, there was limited evidence that warming acupuncture is more effective than manual acupuncture. However, for function, there was inconclusive evidence that warming acupuncture is more effective than acupuncture with TDP or western medicine or acupoint-injection treatment. Conclusions : The evidence suggests that warming acupuncture is more effective for musculoskeletal pain diseases than manual acupuncture, acupuncture with TDP, western medicine and acupoint-injection treatment. But the evidence is moderate to inclusive due to the low methodologic quality of the trials. Further clinical trials with high methodologic quality is required to investigate the effectiveness of warming acupuncture.
Quality assurance with high safety profile is one of the most critical issues to medical device manufacturing. In general, this issue was not paid proper attention with respect to acupuncture needle and its related devices. Acupuncture needles are manufactured through various standards ranging from purely hand-made, partially hand-made and partially machine-made, to fully machine-made mainly in China, Korea, and Japan. There is a large difference in quality between needles from different manufacturers. In order to provide a standard manufacturing guideline, it seems necessary to make a Korean Industrial standard (KS). The authors review this topic from an historical view point, investigate the current situation of the standardization of acupuncture needles in other developed countries, and inspect the general procedure to establish a KS in Korea in order to suggest a KS for acupuncture needles.
Laser acupuncture is defined as the stimulation of traditional acupuncture points with low-intensity, nonthermal laser irradiation. Possible advantages in using laser acupuncture are the noninvasive, painless and low risks of infection treatment. The purpose of this study is to assess the effect of laser acupuncture on the quality and waveform of arterial pulses. Ten acupuncture points were stimulated repeatedly three times in 30 individuals by laser with emission in the near infrared spectral region (808 nm) using an out power and power density of 45 mW and $143W/cm^2$. The analysis of pulse quality and waveform was performed based on the measurement of arterial pressure of the left and right wrist, using a 3-dimensional blood pressure pulse analyzer. Excess-like pulse quality of subjects before laser acupuncture changed significantly to balanced pulse quality after 10, 20, and 30 minutes of laser acupuncture; coefficient of deficient or excess, $C_{DE}$, decreased significantly from 0.68 before acupuncture to 0.61, 0.55, and 0.55 after 10, 20, 30 minutes of laser acupuncture ($$p{\leq_-}0.006$$), respectively. Other pulse qualities, floating or sinking, slow or rapid, choppy or slippery did not change significantly by laser acupuncture (p > 0.05). Pulse waveform analysis showed that amplitude of main peak (systolic function or aortic compliance, $h_1$) of left and right artery pulse waves decreased significantly after 10, 20, and 30 minutes of laser acupuncture (p < 0.05). Other parameters, duration of one cardiac cycle (T), duration of rapid systolic ejection ($T_1$), duration of the systolic phase ($T_4$), and duration of the diastolic phase ($T_5$) of left and right artery pulses did not change significantly after laser acupuncture (p > 0.05).
Objective: The aim of this study was to introduce newly developed cooperation group standards of acupuncture needles for single use and to make a contribution to the future development of Korean Industrial Standards (KS) of acupuncture needles for single use. Results and Conclusion: Quality assurance and quality control with high safety profile is one of the most critical issues in medical device manufacturing. Up to now, proper attention has not been paid to this issue with respect to acupuncture needles for single use and their related devices. We, therefore, organized a committee to make guidelines to produce an acupuncture needle with high quality and safety. In the committee, we reviewed the topic from an historical viewpoint, and investigated the current situation of the standardization of acupuncture needles in other developed countries. Finally, we developed the cooperation group standards in advance of development of KS on the acupuncture needles for single use. The standards are composed of 12 sections describing: Scope, Normative references, Definitions, Materials, Configuration, Appearance and Cleanliness, Quality, Sterilization and Safety, Processing of Surface and Coating Material, Test, Packaging, and Labeling. We hope that the standards would be useful guidelines to produce high quality acupuncture needles and play an important role in the development of KS in the future.
Objectives : In order to ensure safe acupuncture treatment, the quality of the needle tip is essential. But, there have not been so many studies about the quality of the acupuncture needle tip. For this reason we have been already reported about the quality of acupuncture needle tip in Korea using scanning electron microscope(SEM) in 2002, 2003. In order to compare than other society, we investigated the current condition of the tips of the acupuncture needles sold in Europe. Methods : We obtained the needles made by 7 companies, which are sold currently in Europe, and selected 50 pieces out of 100 pieces from each company by randomized methods. And then we observed the tip of each needle using a scanning electron microscope at ${\times}800$ magnification. Results and Discussion : We found that needles had several defects such as scratch marks on the surface, metallic scuff, lumps and irregularities of the needle tips, stubbed or malformed tips, tips of point off-center, peeled off coated tips, same as Korean needles. There was much difference on the quality of needles among the manufacturers, and some needles seem to need thorough quality control. Allowing for the high price, the quality of some needle in Europe generally are better than that of Korean needles. But some Korean needles hold a top position than European ones in quality. We want a good industrial standard to be made in acupuncture manufacturing fields in the near future, because the safety is not less valuable than the efficacy in medicine.
Yoon, Sang Hoon;Kim, Yoon Sik;Kwon, Min Goo;Kwon, Chan Young
Journal of Acupuncture Research
/
제34권3호
/
pp.59-69
/
2017
Objectives : This study analyzed the current status of randomized controlled trials (RCTs) of miniscalpel acupuncture for lumbar spinal stenosis (LSS) in China. Methods : A literature search was performed using the China National Knowledge Infrastructure (CNKI) database. All studies up to June 7th, 2017 were searched. The quality of included RCTs was assessed with the Jadad scale. Results : Five RCTs were finally included in this review. The overall quality of the RCTs was assessed as low. All articles evaluated miniscalpel acupuncture as monotherapy or in combination with filiform needle therapy, drug injection therapy, Tuina treatment, thermal coagulation therapy, or spinal decompression. Miniscalpel acupuncture as monotherapy or adjunctive therapy showed greater therapeutic effect and fewer adverse effects. Conclusion : Miniscalpel acupuncture is a safe and effective nonpharmacological treatment for LSS. However, high-quality studies with consistent treatment protocols are needed to confirm these findings.
Objective : The purpose of this study is to work on the problems and on the direction of the study regarding the evidence-based study of Acupuncture. Methods : We reviewed the PubMed electronic database. Eight articles of systematic review without meta-analysis and six articles without meta-analysis were selected. Results : In the study of eight articles of systematic review without meta-analysis, there were two articles on effectiveness of acupuncture and one on non-effectiveness of acupuncture. Four articles were about the changes according to the quality of randomized controlled trials. Also, one article was about the side-effect of acupuncture. In the study of six articles of systematic review with meta-analysis, there were two articles on Odds Ratio, two on Relative Risk, one on number-needed-to-treat, and two on 18 predefined methodological criteria. Conclusion : As the quality of RCTs was high, positive response decreased and as the quality of RCTs was low, positive response increased. For the study of evidence-based acupuncture, it is necessary that we conduct research on well-planned placebo acupuncture, large sample size, statistical method, method of searching and assessing literature and method of meta-analysis.
Objectives : To analyze the inclusion criteria of participants, control group interventions, and the results of prior studies of acupuncture for OA. Also to identify aspects of the procedure that are associated with positive outcomes in order to establish ideal acupuncture treatment model. And to assess the methodological quality of the trials with modified Jadad score and FEAS in order to evaluate the quality of prior studies and find out whether or not acupuncture has a positive effect in treating OA. Methods : Articles up to the date of November 2008 were searched via computerized databases of PubMed, Journal of Korean Oriental Medicine, The Journal of Korean Acupuncture & Moxibustion Society and Journal of Oriental Rehabilitation Medicine. Bibliographies of reviewed papers were also searched and reviewed. Only randomized controlled trials (RCTs) and systematic reviews concerning the effects of acupuncture or electroacupuncture (EA) on symptoms of osteoarthritis of the human knee, published in English and Korean were included. The acupuncture treatment methods of the reviewed trials were assessed based on STRICTA. And the methodological quality of the trials was assessed by modified Jadad score and FEAS. Results : Twenty one trials of acupuncture for OA were analyzed. Based on the results of this review the following factors might contribute to optimal results from acupuncture treatment. 1) Usage of $ST_{35}$, $GB_{34$, $EX_{32}$, $ST_{36}$ and $SP_9$ acupuncture points. 2) More than four acupuncture points should be used. 3) More than 15 minutes of needle retention time. 4) Needle length-40mm and diameter-0.30mm 5) Usage of EA 6) more than 10 times treatment 7) Treatment frequency of more than once a week, 8) Treatment duration longer than 6 to 8 weeks. Conclusions : High quality clinical trials of Acupuncture for OA is still in lack. Future investigators must concentrate their attentions on the quality of acupuncture treatment itself used in the trials as well as the methodological quality of trials.
Objectives : To review and summarize the existing evidence on acupuncture treatment for cancer and cancer related symptoms. Methods: Literature searches were made through domestic and international databases. Data were extracted according to pre-defined criteria. The methodological quality was assessed using the Modified Jadad scale. Results: Seven studies were included. Two of the studies were high in methodological quality. One study concerning acupuncture treatment for cancerous dyspnea reported insignificant differences between the treatment group and placebo group. The other study concerning auricular acupuncture for cancer related pain showed significant pain relief compared with the control group. All the other studies were non-blinded or uncontrolled trials. Conclusion : The hypothesis that acupuncture may be effective for the treatment of cancer is not supported by the data in recent clinical trials. More accurately designed randomized control trials (RCT) are needed.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.