• Resources Recycling
• /
• v.18 no.3
• /
• pp.55-61
• /
• 2009

Dewatering process to remove water from pigment sludge was important in the diverse aspects of the improvement of product quality, curtailment of the drying cost and the transportation. It was difficult to dewater pigment particles with the mechanical forces because the size was fine under $5{\mu}m$. Thermal filter press dewatering equipment composed of squeezing plate and a fixed heating plate was developed to improve the dewaterability of pigment the sludge as supplying the heat from the fixed heating plate to the cake. Several tests that estimate the dewaterability for pigment sludge as with or without squeezing process and the difference of dewatering time was conducted with this equipment. Dewaterability of thermal dewatering under squeezing process was increased about 20% compared with non squeezing process. Under squeezing process, thermal dewatering tests changing dewatering time with 70 and 80 minute were conducted respectively. The water content of cake was more reduced at dewatering time of 80 minute compared with 70 minute, and dewatering velocity was also decreased, which caused the productivity of thermal filter press to drop. It was observed that clogging of filter cloth didn't almost occur because the liquid was discharged from cake layer easily. In this research, it was resulted that the squeezing process and long dewatering time were effective to improve the dewaterability of pigment sludge. So, this thermal filter press equipment was useful for dewatering the fine particle sludge like pigment.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.669-676
• /
• 2007

The raw water was fractionated into hydrophobic (HPO), transphilic (TPI), and hydrophilic portions (HPI) using XAD resins. The raw water DOC contains 39% of hydrophilics, 43% of hydrophobics, and 18% of transphilics. When fractionated NOM (natural organic matter) was passed through hydrophilic membrane with 100 kDa, hydrophobic portion (HPO) caused the most fouling and hydrophilic portion (HPI) caused the least fouling. This could be related to size and adsorption capability of organics. Small sized organics would pass through membrane pores, but large sized organics would be attracted to either membrane pores or surface, which led to the fouling. An effect of membrane pore size on membrane fouling is related to the availability of organics at membrane pores. As the pore size became larger, the more organics were transported into the membrane pore. Some organics caused pore blocking, and others caused pore adsorption, which resulted in membrane fouling. Membrane material is also important for membrane fouling. More fouling occurred at hydrophobic membrane than hydrophilic membrane regardless of its pore size. Hydrophobic interaction caused more fouling at hydrophobic membrane.

• Journal of Service Research and Studies
• /
• v.9 no.3
• /
• pp.61-72
• /
• 2019

Design is a knowledge service industry that is undervalued in Korea despite its large impact on the development of high - tech industries such as national industrial policy and the fourth industrial revolution. In the design industry, the strategic outsourcing system collapses. This phenomenon is not confined to the domestic market, and the design service companies of design-developed countries such as Europe and the US are also struggling with the classic. Accordingly, some implications were found through the case study of domestic design projects, including overseas, that private companies are more concerned with design cost reduction and cost structure to secure liquidity rather than improving design quality level and pursuing innovation through design outsourcing. It is big. As design is a core competency of a company, internalizing core design tasks, and as products and services become platforms, regional design countermeasures have been reduced, which has led to a decline in the cost standard for large companies' design service outsourcing. In design service industry, design outsourcing is performed at the request of the client, and the service value of the outsourcing is received. In the early 2000s, the importance of design management led global consulting companies to pursue M & A rather than cooperate with design service companies, and Samsung Electronics and other large corporations acquired a large number of excellent design personnel and developed their own design management research institute. This study investigated the design service outsourcing cases of public and private companies (large corporations, midsize companies) widely in relation to the design service price criterion, and grasped the indicators of the actual size and level of the design industry. I will make suggestions about the value and direction of the global design industry through interviews with experts and literature on the changes and influences of these cost criteria.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.2
• /
• pp.72-78
• /
• 2020

Demand for cosmetics with functionality and eco-friendliness has increased dramatically due to recent aging, well-being trends, and increased interest in beauty. Cosmetics production in 2014 was 8,970.4 billion won, an increase of about 50% compared to 6,014.6 billion won in 2010. In the midst of this, similar companies in intense competition are pursuing differentiated strategies and innovation activities to solve quality, price and delivery problems. In particular, cosmetics packaging work is getting more difficult due to the increasing bill of materials (BOM) and difficult assembly methods. Therefore, in this study, the following problems were identified and suggestions for the improvement of the packaging Many research laboratories such as biotechnology, chemistry, and pharmaceuticals, which are undergoing various studies, are equipped with ready-made laboratory safety equipments such as bio-safety workbenches, aseptic bases, and exhaust workbenches. However, most researchers are disadvantaged in using existing safety equipment. This is because existing safety equipment can not take into account all of the unique characteristics of the research. For this reason, researchers are demanding the development of customized safety equipment that is well suited to their research needs. process of Company C, which is facing difficult situation to respond to the customer 's delivery due to the 52 - hour work week. First, we used the stopwatch to find the difficulty process in the packaging process and show ways to improve it. Second, to improve the efficiency of line balancing in the packaging process, we integrate processes, improve work methods, and perform simple automation. As a result, the prepare loss for replacement was reduced by 1 minute from 5 minutes, resulting in a 23% increase in productivity from 112 ea./hour to 137ea./ hour per person. At this time, the LOB of the packaging process was improved from 70% to 82% by operating one more production line through one person per line, total 9 people saving.

• Journal of Korea Port Economic Association
• /
• v.30 no.4
• /
• pp.169-198
• /
• 2014

Due to the recent worldwide economic downturn, companies are required to put more effort into their innovation and quality improvement. In particular, business relationship is increasingly emphasized to be changed from a vertical relationship to a more horizontal relationship, such as collaborative partnership based on trust. In the logistics industry, through the collaboration, consignors can gain competitive advantages by focusing on their core capabilities, and freight forwarders also take advantages of securing stable cargoes and specialist expertise in distribution. Therefore, this study aims to identify key factors for developing a collaborative partnership between freight forwarders and consignors, and further examine the differences between the two groups empirically by using questionnaire survey. Based on the results, the main factors were found as follows: 1) Trust Building, 2) Competence Improvement, 3) Business Ecosystem and 4) Government Assistance. According to the analysis on sub-factors, first, among the four main factors, it turned out that trust is the most important variable. Specifically, the sub-factor of providing regular and stable service was revealed to be most critical. Second, it was found that forwarders need to improve services on 'Information Exchange System' and 'Electronic Data Interchange'. Finally, it is necessary for both consignors and forwarders to have better understanding of partnership. Key implications for both groups are highlighted based on the results.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.136-143
• /
• 2015

Snow-melting system has been applied not only to roads for car traffic but also to pavement for the pedestrians safety reason in some of the developed countries such as USA and Canada based on countermeasures against Natural Disasters Act revised in 2000. Even though this system was introduced in korea in 2006 and has been partly applied to car traffic roads, there is few places that the system has been applied. Therefore, in this research a snow-melting system with a block-type to cover a pavement that efficiently transfers heat form heat rays to the top of a pavement and protects the heat rays. A quality check showed that compression and bending strength was improved approximately 5 times stronger and 7 to 10 times more absorption rate than the KS(Korea Industrial Standard) requirement. Moreover, only 10 minute was required to increase temperature above zero with a block-type snow-melting system whereas approximately 180 minute was spent with the existing system. This research is expected to contribute to environmental issues and reduce accidents on a slippery road.

• Journal of the Korean association of regional geographers
• /
• v.7 no.2
• /
• pp.17-34
• /
• 2001

This paper is to analyze how firms in a large firm-led industrial city have carried out the restructuring in the face of radical shifts, with focus on the strategy and the restructuring of firms in Ulsan, a typical industrial district in Korea that is specialized in heavy & chemical industry. It has been well known that the local economy has been led by a small number of large firms, including affiliates of chaebol, and its industrial structure has also been characterised as a clear dichotomy between large firms as a customer and small and medium-size firms as a supplier, which can be called not horizontal but vertical relations. It can identify some tendencies, however, that local companies have been rather dynamically changing in response to increasingly turbulent environment since the Asian crisis. Some are radical, but some incremental. These can be summarized in four distinctive but interlinked ways. First, more than half of local companies surveyed have attempted to change their production systems, mainly from the fordist mass production towards the flexible mass production, seeking both economies of scale and scope. Second, local firms have vigorously continued to reorganize the boundary of the production and the organization, by specializing products and focusing on the core competence in order to save costs and cope with radically changing customer demands in a flexible way. Third, there have been various strategies for the organizational innovation such as the introduction of team organization, the boundary blurring between the managerial and production workers and the intra-firm spin-offs, so as to improve managerial efficiency and competence in the use of internal labour market. Finally, they have tried to be more sensitive to the market and customers. These tendencies seem to be increasingly critical to sustain their competitiveness. To do so, they tend to focus increasingly not only on the competing via the product quality rather than through price, but also to seek to diversify the market and customer firms beyond national boundary.

• Journal of the Korean association of regional geographers
• /
• v.14 no.5
• /
• pp.521-535
• /
• 2008

This paper aims to explore the spatial distribution and locational characteristics of the shipbuilding industry in the south-east region of Korea. The geography of the Korea's shipbuilding industry illustrates an absolute spatial concentration into the south-east region, including Gyeongnam, Busan and Ulsan. In view of the type of agglomeration, it is argued that the south-east region's shipbuilding industry has been evolved as an Advanced Hub & Spoke cluster, which is characterized by interconnected relationships between a couple of gigantic customer firms and the majority of small and medium-sized supplier firms. A survey on the locational factors of the firms presents that traditional locational factors, such as physical infrastructure, land, labour and industrial linkages, are more important than new economic geographical locational factors, such as knowledge, learning, innovation and networks. According to firm's evaluation of the Gyeongnam region's locational environments for the shipbuilding industry is, however, rather different to the result of firm's location decision factors. The shipbuilding firms in Gyeongnam see that the Gyeongnam region retains regional advantages in terms of agglomeration economies, geographical proximity to customers, the infrastructure of transportation and communication and the quality of life. On the contrary, firms recognize that the Gyeongnam region suffers from the lack of R&D and production workforce and a weak basis of industry-university -government networks.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.343-347
• /
• 2008

There are two kind of system in hotel for evaluating management. the first is infra system, for example Front management system - reservation system, C/I, C/O system, POS system , web system, call center management -, Back office system, interface system, and so on which manage direct control for hotel, and next is strategic system, for example BSC , CS . which is supporting hotel management. The purpose of this study was to find using the Balanced Scorecard to evaluate hotel management perfomance. Management performance is based on productivity, quality, time, effect, and responsiveness. Hotel economic value is not equal visual asset which is measured financial value. It is include hotel brand, image, customers who have good loyalty, employees who give customers special service, and systems which was affected by internal process. In conclusion, innovation, growth, internal system process, empioyee and customer have effect hotel performance. Therefore hotel has to know non-financial performance which has positively relate to financial performance.

• Cartoon and Animation Studies
• /
• s.25
• /
• pp.41-63
• /
• 2011

Many educational facilities have been formed due to the nation's revival policy in the animation industry since about 1995. Owed to the active financial support of the nation, the production industry rapidly vitalized, production technology rapidly advanced, and a large workforce is being passed on into society through educational institutions. The reality of many developing countries appearing to be putting emphasis on the industrialization of animation, similar to our country, is becoming a great pressure on us industrially. It is never easy to develop a certain field into a globally competitive industry in a short period of time. Our countermeasure, pursuant to these international circumstances, lies in innovation and creativity that has broken away from the existing methods of production, and mass production of high quality animation specialists. This paper is a new educational proposition for the consolidation of national competitiveness. Animating, the core of producing an animation, completely depends on the animator's artistic and technical ability. In order to supplement the existing methods of studying by theory and make up for the biggest weak point, which is the lack of "on the scene" learning contents, I propose incorporating movements based on frequently appearing characters in popular animations and acting them out slowly and including the "Slow Motion" kinetic effect, a way of enabling someone to learn and sense astrodynamic fundamental principles by oneself. It is a new method of learning movement, a plan made to achieve sensual performance gestures, and an improvement in direction for students who wish to become animators in the future.