• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.639-645
• /
• 2008

The objectives of this research are to (1) observe changes in particle size distribution due to formation of microflocs during coagulation process (2) identify the membrane fouling potential on cross flow system (3) investigate the mechanism of membrane fouling. The rate of flux decline for the hydrophobic membrane was significantly greater than for the hydrophilic membrane, regardless of pretreatment conditions. The pretreatment of the raw water significantly reduced the fouling of the UF membrane. Also, the rate of flux decline for the hydrophobic membrane was considerably greater than for the hydrophilic membrane. Applying coagulation process before membrane filtration showed not only reducing membrane fouling, but also improving the removal of dissolved organic materials that might otherwise not be removed by the membrane. That is, during the mixing period, substantial changes in particle size distribution occurred under rapid and slow mixing condition due to the simultaneous formation of microflocs and NOM precipitates. Therefore, combined pretreatment using coagulation not only improved dissolved organics removal efficiency but also flux recovery efficiency.

• The Journal of Information Technology
• /
• v.4 no.2
• /
• pp.129-136
• /
• 2001

Most of the acoustic microscopes have been constructed acoustic image by simply measuring the amplitude of the reflected signal from the specimen. This method fails to produce images of good quality because the change in amplitude is not sensitive enough to specimen with fine variation. In this paper, we have been constructed the acoustic microscope system which has been able to measure simultaneously the amplitude and phase of the reflected ultrasonic signal. And also we have been constructed the amplitude and phase images for the 500 won coin as a sample and the alumium spacimen with internal round defect, and compared and analyzed these images. In expermental result, the phase image have shown better sensitive than the amplitude image and given better contrast for the micro height variation of specimen. It will be expected that the phase image can be used as an additional bit of information to improve ambiguituities in amplitude image on nondestructive testing for specimen with fine variation.

• The Journal of Information Technology
• /
• v.3 no.2
• /
• pp.39-47
• /
• 2000

Among the compression methods of moving picture information, a motion estimation method is used to remove time-repeating. The Block Matching Algorithm in motion estimation methods is the commonest one. In recent days, it is required the more advanced high quality in many image processing fields, for example HDTV, etc. Therefore, we have to accomplish not by means of Partial Search Algorithm, but by means of Full Search Algorithm in Block Matching Algorithm. In this paper, it is suggested a structure that reduce total calculation quantity and size, because the structure using Bit Plane select and use only 3bit of 8bit luminance signal.

• Journal of Gastric Cancer
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2011

Gastric cancer is the most common malignancy and the incidence is steadily increasing in Korea. The principal treatment modality for gastric cancer is surgical extirpation of tumor along with draining lymph nodes. Gastrectomy with D2 lymph node dissection has been well established as a standard of surgery and improved the survival of gastric cancer patients. Recently, technological advances are drastically reshaping the landscape of surgical treatment of gastric cancer. One of the most notable trends is that minimal access surgery becomes dominating the treatment of early stage diseases. For advanced diseases, the standard access surgery is considered a reference treatment. Although there is a pilot study underway to evaluate the feasibility of the application of minimal access surgery to advanced gastric cancer (AGC), the evidence for oncological safety is not yet provided sufficiently. Based on the recent randomized controlled trials, the extent of surgery for AGC has re-defined as para-aortic lymph node dissection dose not add any survival benefit while increasing surgery-related morbidities. In addition, it is now accepted as a standard operation omitting unnecessary procedures such as splenectomy and/or distal pancreatectomy for prophylactic lymph node dissection. Conceptual and technical innovation has contributed to decreasing morbidity and mortality without impairing oncological safety. All these recent advances in the field of gastric cancer surgery would be concluded in maximizing therapeutic index for gastric cancer while improving quality of life.

• STI Policy Review
• /
• v.4 no.2
• /
• pp.113-135
• /
• 2013

This paper explores how research excellence is perceived among researchers in Thailand and Japan with an aim to explore whether there are any new indicators that could later be proposed and adopted as criteria of excellence. Based on a questionnaire survey, the findings reflect ideas and viewpoints that could be found among researchers in both countries. Creative researchers are crucial to a strong national research and innovation system. Institutions should provide an environment or incentives based on research performance for their researchers to flourish and be productive. For decades, bibliometrics have been used to evaluate individual research performance for its easy approach and faster speed than a qualitative assessment would warrant. Nonetheless, there have been a number of studies on research performance evaluating systems that point out how a purely bibliometric approach is inadequate in summarizing the quality of the scientific performance. The pressures on researchers today influence their thinking and oppose their creativity. To investigate the perception of research excellence, three key research questions were set in this study: what counts as excellence, how to measure excellence, and how to support excellence. The findings confirm that traditional granting criteria that frames an idea of excellence remain valid, but they also suggest novel criteria be considered and prioritized. This paper argues that the existing evaluating system is insufficient for unleashing the curiosity and creativity of researchers and fostering excellence. In the final section, the paper discusses factors that contribute to scientific creativity that we should not overlook.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.3
• /
• pp.155-162
• /
• 2017

The purpose of this paper is to study renovation plan of value chain from a user's viewpoint by making practical application of digital technology in Korea and China. And it is surely meaningful to investigate the important motivation factors of continuous using smart-phone in two countries, and to analyze the improving effect toward to the quality of life in continuous using smart-phone. By this study we can expect the value improving effect of user experience. The results of hypothesis testing can be summarized as follows: First, the hypothesis that positive affect has a plus effect on pragmatic value is accepted in Korea and China. Secondly, the hypothesis that positive affect has a plus effect on hedonic value is accepted in two countries. Thirdly, the hypothesis that negative affect has a minus effect on pragmatic value is accepted in Korea, but rejected in China. Fourthly, the hypothesis that negative affect has a minus effect on hedonic value is accepted in two countries. Fifthly, the hypothesis that pragmatic value has a plus effect on life satisfaction is rejected in two countries. Sixthly, the hypothesis that hedonic value has a plus effect on life satisfaction is accepted in Korea, but rejected in China. Seventhly, the hypothesis that there is a difference in positive affect, negative affect, pragmatic value, hedonic value and life satisfaction between Korea and China is rejected in positive affect and negative affect, but accepted in pragmatic value, hedonic value and life satisfaction. In the competition among enterprises, user experience instead of goods themselves became influential as a differential factor. And many advanced enterprises began taking a serious view of customer's happiness and user experience improvement.

• Journal of Korean Society of Rural Planning
• /
• v.17 no.1
• /
• pp.89-98
• /
• 2011

Recently, the food industry has evolved into a new and innovative trend according to its globalization and change of food consumption patterns. However, it is hard for the traditional food industry in Korea to meet the changing consumers' needs because of its poorer quality control and lower industrialization technology than other advanced industries. Also the knowledges acquired through a lot of time and efforts would be lost after the human resources with tacit knowledges leave by their too much aging. Especially, the 21st century would be called as knowledge based society which means that knowledge be the important contributing factor in the economic growth. In this regard, this study aimed at proposing the knowledge based system for systematically managing or preserving knowledges of Mosisongpyun industry in Yeonggwang County to seek for the sustainable development of the traditional food industry in Korea. The knowledge based system of Mosisongpyun industry in Yeonggwang County is finally proposed as follows; First, hardware is composed with the necessary unit facilities such as interpretive center, learning and experience room, library, etc. And the integrating facilities such as Mosisongpyun theme park, traditional village, and knowledge industrialization support center are proposed. Second, software is composed with the necessary unit softwares such as the preservation manual of traditional knowledge and skill, web-site administrator, development of graded textbooks, development database software, etc. And the integrating softwares such as development of innovation and management ability in Mosisongpyun industry are proposed. Third, humanware is composed with the necessary unit programs such as exhibition, own training program, incubator support system, etc. And the integrating programs such as the farm association corporation, the testing and research institute, the institution of learning and training are proposed.

• Journal of Information Technology Services
• /
• v.9 no.1
• /
• pp.43-56
• /
• 2010

With the improvement of the Information Technology and the change of the business environment, the dependency of business on the Information Technology shows sharply increase. The Information Technology, however, is centered on the support of the technology viewpoint and thus the influence and effect of Information Technology on the business is hardly analyzed. The information system, therefore, requires not only technology-centric support management but service-oriented and systematic introduction of Information Technology Service Management(ITSM). The domestic ITSM market is currently expanding into variety of industries like finance, telecommunication, manufacturing and public service and at the same time the consequent reconstruction process of information system is continuously under way so as to qualify for the ISO 20000 certification. Especially the public organizations rapidly adopt the ITSM, in order to improve the quality of public service together with a goal of realizing the electronic government and of managerial innovation. The existing ITSM still, however, shows the tendency of depending only on the system construction and the management on the visible requirements whereas the overall process is not likely being improved. Hence, this study suggests, focusing on the life cycle of service, the model of ITSM based on Information Technology Infrastructure Library(ITIL) v3 which is appropriate for the public service. We expect, as stated in this study, that our ITSM model shall be widely accepted to the public agencies who promote the advance campaign by setting up the ITSM or reconstructing the existing process.

• Resources Recycling
• /
• v.17 no.5
• /
• pp.11-18
• /
• 2008

The purpose of this study was to evaluate the effects of blast-furnace slag on chemical attack and carbonation of latex-modified concrete (LMC) and ordinary portland cement concrete as slag contents. Main experimental variables were performed latex contents (0%, 15%) and slag contents (0%, 30%, 50%). The compressive strengths, chemical attacks resistance and carbonation depth were measured to analyze the characteristic of the developed LMC and BS-LMC(latex-modified concrete added blast-furnace slag) on hardened concrete. The test results showed that compressive strength of BS-LMC with blast-furnace slag content 30% was quite similar to it of OPC without slag content. The structural quality deterioration was concerned when blast slag content was up to 50%. However, carbonation restraint of BS-LMC with blast-furnace slag 30% was bigger then that of opc. Also, the effects of added latex on OPC and BS-LMC were increased on the carbonation restraint and chemical attacks resistance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5045-5050
• /
• 2015

As modern houses are constructed with high-density and high-insulation, there is benefit to reduce energy consumption, but there are many side effects raised from polluted air. To solve the problem, a ventilation system is used to improve a indoor air quality. In this study, we tested the parallel flow type heat exchanger used in a heat exchanger of an automotive air conditioner. And we experimentally estimate ventilation performance of HRV(heat recovery ventilator) with heat-pipe according to working fluid filling quantity and ventilation. The working fluid was R22, which was filled from 40 to 60 (%vol.) by 10(%vol.). Ventilation based on the front velocity was measured from 0.3 m/s to 1.5 m/s by 0.3 m/s intervals. Refrigerant filling quantity with the highest efficiency was found to depend on the ventilation. From this study the optimal refrigerant filling quantity in accordance with the ventilation of the detachable heat pipes was found experimentally.