• International Journal of Quality Innovation
• /
• v.1 no.1
• /
• pp.97-105
• /
• 2000

In this paper, a two-section method for measuring is introduced and the variation sources of measurement process are analysed. Measuring is a special process in general process. Various variation source must be firstly decomposed so that the statistical distribution law of measuring process can be established, and then implement monitoring control of the measuring process. A special method to obtain the measuring variation is discussed, and a monitoring control technique for measuring process is studied based statistical distribution. Towards the end, we briefly introduce software design for the analysis and control of a measurement process.

• Journal of Korean Society for Quality Management
• /
• v.23 no.2
• /
• pp.103-112
• /
• 1995

This paper describes the method of establishing efficient system for the control of quality records. To establish the best control system of quality records, the organization must not only understand ISO Code requirements for quality record complectly but also identify the documents to be controlled as a quality records correctly. In addition, when establishing the system, the organization must absolutely consider the fact that quality records shall be maintained to demonstrate conformance to specified requirements and the effective operation of the quality system. This will provide the guidance which need to establish the system for quality control to the organization which produces documents in accordance with ISO Code requirements.

• Management & Information Systems Review
• /
• v.18
• /
• pp.201-222
• /
• 2006

As the competition between countries has become higher and the notion of software quality has been widely spread. it has been necessary to develop technologies that can ensure and produce high quality software. With the advent of information-oriented society. quality control has to transfer to the quality control activities focused on software system instead of those activities focused on hardware system. If so, how do we get to handle the quality control on the basis of the new approach. Also, as software applications have grown. so too has the importance of software quality. In order to manage software quality, the technology to specify and evaluate both the software product quality and development process quality objectively quantitatively is most important. To produce products of good quality, we need a more progressive quality control system according to the need of software development life cycle. In other words, we do software right the first time or build quality in the process. On the basis intermediate and final time or build quality in the process. On the basis of data achieved, we can evaluate the products according to the consequences of the data, What are the problems to contrive the software quality control system?, we con promote the quality of products. To achieved that goal, we con provide a suitable the technique and method of software quality control.

• Journal of Korean Society for Quality Management
• /
• v.41 no.3
• /
• pp.487-494
• /
• 2013

Purpose: In this study, we propose the precision guided munitions verification methodology using the statistical analysis method has been proposed. and it can be applied to the precision guided munitions quality assurance work. Methods: This modeling is based on Failure Mode and Effects Analysis, Statistical Process Control, Defense Quality Managerment System, Production Readiness Review, Manufacturing Readiness Assesment and so on. Results: The Process Control Modeling that has the following procedures ; searching the critical to quality, statistical analysis by process, verify process. Moreover, the effectiveness of the methodology is verified by applying to the precision guided munitions. Conclusion: To achieve a analysis methods of statistical process control and verify process for precision guided munitions.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.7
• /
• pp.658-665
• /
• 2009

Quality control QC for spot-uniformity is a critical point in fabricating an oligonucleotide array, and quantification of targets is very important in array analysis. We developed two new types of QC probes as a means of confirming the quality of the uniformity of attached probes and the quantification of targets. We compared the signal intensities and fluorescent images of the QC and target-specific probes of arrays containing only target-specific probes and those containing both QC and target-specific probes. In a comparison of quality control methods, it was found that the arrays containing QC probes could check spot-uniformity or spot defects during all processes of array fabrication, including after spotting, after washing, and after hybridization. In a comparison of quantification results, the array fabricated by the method using QC probes showed linear and regular results because it was possible to normalize variations in spot size and morphology and amount of attached probe. This method could avoid errors originating in probe concentration and spot morphology because it could be normalized by QC probes. There were significant differences in the signal intensities of all mixtures (P<0.05). This result indicates that the method using QC probes is more useful than the ordinary method for quantification of mixed target. In the quantification of mixed targets, this method could determine a range for mixed targets of various amounts. Our results suggest that methods using QC probes for array fabrication are very useful to the quality control of spots in the fabrication processes of quantitative oligonucleotide arrays.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.591-596
• /
• 1999

In this paper, we present a joint quality control system to be able to accurately control the relative picture quality among the video programs in terms of PSNR. The joint quality control system allows variable bit rate (VBR) for each video program to maintain the pre-determined relative picture quality among the aggregated video programs while keeping a constant sum of the bit rates for all programs to be transmitted over a single constant bit rate (CBR) channel. This is achieved by simultaneous controlling the video encoders to generate VBR video streams at the central controller. Furthermore we also suggest buffer regulation method based on the analysis of the constraints imposed by sender/receiver buffer sizes and total transmission rate. Through various simulation results, it is found that our quality control systems guarantee that the video buffers do not overflow and underflow and the quality control errors do not exceed 0.1 ㏈.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.27-30
• /
• 2000

In this paper, we propose a new dynamic bandwidth allocation and call admission control method for the VBR video sources with QoS constraints to provide user's quality of service requirements and at the same time to achieve an efficient resource management in networks. The proposed mechanism dynamically adjusts the necessary bandwidth by the networks based on the provided quality of service satisfaction degree of each connection in respect to the user's requirements in terms of loss ratio and average delay Simulation results show that our proposed dynamic method is able to provide the desired level of quality of service and high utilization.

• Journal of Korean Society for Quality Management
• /
• v.31 no.1
• /
• pp.132-141
• /
• 2003

As the technology has improved and demands of customers have varied, a lot of products are getting diverse and intricate. Consequently, the enterprise that produce products have to simultaneously consider the various variables for the very products. There are some scheme, such as Multivariate control chart and Demerit control chart, designed to simultaneously monitor the variables in the process. In this paper, we present an effective method for process control using the Demerit-CUSUM control chart in the process where nonconforming units or nonconformities are occured by various types. In addition, we show interpretation method for abnormal signal in order to quickly detect the assignable causes as Demerit-CUSUM control chart signals abnormality. we compare performance of Demerit control chart and Demerit-CUSUM control chart using example again used in the existing studies, and present result of performance accoriding to changing sample size and parameter.

• Journal of Korean Society for Quality Management
• /
• v.23 no.3
• /
• pp.140-155
• /
• 1995

This paper proposes a quality control method of assembly parts based on parts inspection information. We use the parts inspection information for reduction of defective fraction in assembly and prediction of assembly quality. At first, we build the functional relationship between parts and assembled unit by regression analysis. Secondly, if we use the inspection informations of parts which are estimators of means and variances, we can predict the nonconforming probability of assembled unit and propose the best assembly method. In a case study, we showed the efficency of the proposed method in two part assembly.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.223-228
• /
• 2000

Although construction company try to get good quality control it's enough to study about developing objective evaluation method and checking quality method. It is important to meaning concrete quality at placing point, immediate quality checking method is limited. The purpose of this study is to develop new method to know early 28-day concrete for getting faithful quality control. The results of this study are as follows :1) With sealed molds, reduced moisture volatilization to more than 50% and enlarged 20% accelerated compressive strength than before one. 2) Accelerated compressive strength of concrete specimen shows higher strength when it was in the air for long time 3)Interrelation with 7-day and 28-day strength were 0.781,0.90, It is higher than before one