• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.811-818
• /
• 2000

This paper deals with the design of a car seat for enhancing dynamic ride quality using a Biomechanical Model that was developed from the measured whole-body vibration characteristic. For evaluation of seat ride quality, the z-axis acceleration of floor as an input of biomechanical model was measured on a driving passenger car at highway and national road. Form the floor signal and the estimated biomechanical model, overall ride value evaluated by parameter study of seat stiffness and damping. The result shows that overall ride value decreases as the seat damping increases and the sear stiffness decreases. A lot of polyurethane foams were manufactured and tried to evaluate dynamic ride quality of a seat. It is found that stiffness and damping of a seat show a linear relationship, which means the stiffness and damping are not independent each other, So the optimal seat parameters within practically achievable space are determined.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.14 no.24
• /
• pp.133-139
• /
• 1991

If the specifications of product. in general. art determined too wide. the precision of product becomes diminished. Otherwise it costs dearly to keep the precision. Therefore, It is realistic to consider various factors in determining specification of qualify characteristics TAGUCH Idefines quality of an object as "Quality is the loss that a product causes to society after being shipped. other than any losses caused by its intrinsic function". Particularly, to improve the performances of product TAGUCHI focuses his attention on the product design and process design which enable the functional characteristics of product to he robust to noises. In this paper, by the TAGUCHI's loss function, the characteristics which affect the variation of a product performance are classified into the scrappable characteristics and the reworkable characteristics when the target values of functional characteristics have been determined. And we will determine the tolerance of each characteristic which minimize the quality cost by the cost function which considers the economic factors and probability features of each characteristic.cteristic.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.503-505
• /
• 2009

In this paper, we research the method for write quality improvement by temperature characteristic of Laser diode for optical recording. Differential Resistance of Blu-ray laser diode is changed by temperature. We analyze the effect of the change of the differential resistance and propose the method for the write quality improvement.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.109-117
• /
• 2021

Although previous studies on social commerce have provided much insight, more studies in the perspective of social network are needed because social commerce happens within online communities or virtual groups, where buyers connect and interact with each other by sharing information. So, the purpose of this study is to investigate how transactive memory as network characteristic can affect social commerce behavior through social support and relationship quality. We verified the relational effect among social support, relationship quality, and social commerce intention in the Korean market context. Moreover, we found transactive memory capability also played an essential role in the field of social commerce. Specifically, we found consumer's transactive memory capability plays a significant moderating role in the relation between social support and relationship quality.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1354-1363
• /
• 1993

Optical methods were developed to examine their feasibility for quality evaluation of peanut with pod. Surface color and internal quality of peanut were measured without contact. The surface color of peanut was measured by light reflectance at a region of visible wavelengths. Its characteristic was high correlated with a visual grading of peanut. A trial machine for the color grading of peanut was developed using an optical sensor and it was considered to compare with the visual grading. The spectral reflectance at a region of near infrared wavelengths from 1,200 to 2,500nm was measured , and the chemical components of peanut were related to spectral reflectance at special wavelengths. The protein, fat and moisture contents of peanut were estimated by the near infrared methods. An infrared imaging method was developed to evaluate the internal quality of peanut with pod. As thermal characteristic of peanut with pod was deeply related to internal quality , the quality of peanut can be evaluated by temperature changes on the surface of peanut. Measurement of surface color, near infrared reflectance and thermal imaging were shown to be very effective in grading of peanut with pod.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.201-208
• /
• 2012

Recently the market of the food waste disposer has increased. Therefore, many companies in the development of food garbage disposer has been increasing interest. In this study, we used QFD (Quality Function Development) to find out the quality factors for the development of the food waste disposer reflecting the consumer needs. HOQ (House Of Quality) showing the correlation between consumer characteristic and engineering characteristic was written by investigating the consumer needs based on the consumer complaints and survey. In addition, we generated the CTQ (Critical To Quality) reflecting the weighting of the importance of the parts. As the research result, the important quality factors for the food garbage disposer were the grinding capability, drying, and odor emission features. The crushing motor associated with grinding and dehydration appeared as the most important quality factors among the parts. Second thing was the fan motor associated with odor. The findings will be able to contribute to the development of the food waste disposer reflecting the consumer needs.

• Imaging Science in Dentistry
• /
• v.30 no.3
• /
• pp.183-188
• /
• 2000

Purpose: This study was to evaluate the beam quality of intraoral X-ray equipments used at Yonsei University Dental Hospital (YUDH) using the half value layer (HVL) and the characteristic curve of intraoral standard X-ray film. Materials and Methods : The study was done using the intraoral X -ray equipments used at each clinical department at YUDH. Aluminum filter was used to determine the HVL. Intraoral standard film was used to get the characteristic curve of each intraoral X-ray equipment. Results: Most of the HVLs of intraoral X-ray equipments were higher than the least recommended thickness, but the REX 601 model used at the operative dentistry department and the X-707 model used at the pediatric dentistry department had HVLs lower than the recommended thickness. The slopes of the characteristic curves of films taken using the PANP AS 601 model and REX 601 model at operative dentistry department, the X-70S model of prosthodontic dentistry department, and the REX 601 model at the student clinic were relatively low. Conclusion: HVL and the characteristic curve of X-ray film can be used to evaluate the beam quality of intraoral X-ray equipment. In order to get the best X-ray films with the least radiation exposure to patients and best diagnostic information in clinical dentistry, X -ray equipment should be managed in the planned and organized fashion.

• Journal of Korean Society on Water Environment
• /
• v.27 no.2
• /
• pp.228-234
• /
• 2011

The goal of water quality management on stream and watershed is to focus not on discharged loads management but on a water quality management. Discharged loads management is not goal of water quality management but way for perform with total maximum daily loads management. It is necessary to estimate the relation between non-point source with stromwater runoff (NPSSR) and water quality to select a watershed where it is required to manage NPSSR for water quality improvement. To evaluate the effects of NPSSR on stream's water quality, we compare the aspects of water quality in dry and wet seasons using flow duration curve analysis based on flow rate variation data by actual surveying. In this study we attempt to quantify the variation characteristic of water quality and estimate the Inflow characteristic of pollution source with water quality and flow rate monitoring on 10 watersheds. We try to estimate water quality and flow rate by regression analysis and try again regression analysis with each high and low water quality data more than estimations. An analysis of relation between water quality and flow rate of 10 watersheds shows that the water quality of the Nonsan and the Ganggyeong streams had been polluted by NPSSR pollutants. Other eight streams were important point source more than NPSSR. It is wide variation range of $BOD_5$ also high average concentration of $BOD_5$. We have to quantify water quality variation by cv1 in wet season and cv365 in dry season with comparing the estimate of high water quality and low water quality. This method can be used to indicator for water quality variation according to flow rate.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.6
• /
• pp.52-59
• /
• 2002

Resently, reduction of industrial products in size and weight has increased by the application of micro-drill for gadgets of high precision and gave rise to a great interest in a micro-drilling. Due to the lack of tool stiffness and the chip packing, micro-drilling requires not only the robust tool structure which has not affected by the vibration, but also the effective drilling methods designed to prevent tool fracture from cutting troubles. Firstly, this paper presents a optimum characteristic evaluation method of 0.15mm microdrill in consideration of new manufacturing processes for improving the product rate and extend the tool life, and secondly suggest between microdrilling characteristic properties of tool md evaluation of workpiece quality through experiment.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.2
• /
• pp.91-101
• /
• 2004

Consumers require various quality characteristics including safety. The reduction of risk concerned on product safety becomes an urgent issue in leading companies. The strategy for customer satisfaction by choosing attractive quality characteristic is not enough for risk reduction in view of producer. This paper presents a method for choosing quality characteristics and risk characteristics by integrating QFD based on quality requirements and AHP based on safety requirements, also shows its application for complex equipment.