• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.7 s.100
• /
• pp.821-828
• /
• 2005

In our life, we have used many digital appliances. They help us to improve the quality of life but sometimes give us unsatisfactory result. Because they produce specific noise. Especially vacuum cleaner produce much noise that is very annoying. So we need to study what sound metrics affect human sensibility. In this paper, we develop sound quality index for vacuum cleaner using the sound quality metrics defined in psychoacoustics. First, we carry out the subjective evaluation of vacuum cleaner sound to verify what vacuum sound feels good to human. And then artificial neural network estimated the complexity and the nonlinear characteristics of the relations between subjective evaluation and sound metrics. Finally the ANN is trained repeatedly to have a good performance for sound qualify index of the vacuum cleaner. As a result, the sound quality index of vacuum cleaner has a correlation of $93.5\%$ between the subjective evaluation and ANN. So, there exist three factors that Is loudness, sharpness, roughness which affect the sound quality of vacuum cleaner.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.2
• /
• pp.159-163
• /
• 2005

This paper gives characterization of ZnO thin film deposited by RF magnetron sputtering method, which is concerned in deposition process and device fabrication process, to fabricate solidly mounted resonator(SMR)-type film bulk acoustic resonator(FBAR). A piezoelectric layer of 1.1${\mu}{\textrm}{m}$ thick ZnO thin films were grown on thermally oxidized SiO$_2$(3000 $\AA$)/Si substrate layers by RF magnetron sputtering at the room temperature. The highly c-axis oriented ZnO thin film was obtained at the conditions of 265 W of RF power, 10 mtorr of working pressure, and 50/50 of Ar/O$_2$ gas ratio. The piezoelectric-active area was 50 ${\mu}{\textrm}{m}$${\times}$50${\mu}{\textrm}{m}$, and the thickness of ZnO film and Al-3 % Cu electrode were 1.4 ${\mu}{\textrm}{m}$ and 180${\mu}{\textrm}{m}$, respectively. Its series and parallel frequencies appeared at 2.128 and 2.151 GHz, respectively, and the qualify factor of the resonator was as high as 401.8$\pm$8.5.

• Journal of Biosystems Engineering
• /
• v.21 no.2
• /
• pp.198-207
• /
• 1996

To measure the moisture content, protein and viscosity of brown and milled rice with Near Infrared Reflectance(NIR) analyzer, the comparison and analysis of the data from the chemical analysis and NIR analyzer were conducted. The purpose of this study is to find out the fundamental data required for the prediction of rice qualify and taste rank, and to develop a measuring method of constituents and physical characteristics of domestic rice with NIR analyzer. The important results can be summarized as follows. 1. The $r^2$ and SEC of moisture calibration from brown rice powder were 0.87 and 0.09 respectively, those of milled rice powder were 0.95 and 0.08 respectively. 2. The $r^2$ and SEC of protein calibration from brown rice powder were 0.83 and 0.20 respectively, those of milled rice powder were 0.86 and 0.20 respectively. 3. The $r^2$ and SEC of viscosity calibration from brown rice powder were 0.36 and 15.50 respectively, those of milled rice powder were 0.55 and 12.98 respectively. Further study is required to develop better prediction model for viscosity. It is necessary the continuous study including wavelength selection, because $r^2$ is small for practical use. 4. The regression equation for one rice variety was nearly coincident with other. Therefore, it is required that the prediction model should be developed for the all rice samples.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.177-182
• /
• 2003

This study is directed toward determining the number and characteristics of psychologically meaningful perceptual dimensions required for assessing the sound Ouaiity with respect to vehicle interior and/or exterior noises. and toward identifying the acoustical or psychoacoustical bases underlying the perception. By nonmetric MDS and clustring analysis of sound quality data sets on our own, of critical importance are two perceptual dimensions for which subjective verdicts can be interpreted as loudness and sharpness. The perceptual dimensions based upon similarity judgments could be accounted for 48% and 24% of the variance. each of which might be a match for the acoustic parameter "A-weighted maximum pressure level"(r= .85) and for the psychoacoustic parameter "sharpness" (r= .65), respectively. On the other hand, the perceptual dimensions based upon preference ratings could explain 66% and 10% of the variance. where the acoustic parameter "A-weighted maximum pressure leve"(r= .92) might be taken to be a best predictor, but sharpness appeared to be less suitable for the description of Preference behavior. Linked to the results, the problems of quantitative modelling of subjective sound quality evaluation and also of implementing corresponding cognitive combination rule for technical and industrial applications, say having "winner-sound qualify" according to preference criteria will be shortly in discussion.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.119-129
• /
• 2020

Unlike synthetic dyes, natural dyes do not affect the human body or create atmosphere pollution that are also mothproof, antibiotic and sterilized. This study examined the changes in dye adsorption properties according to mordant types and mordanting method to qualify trends using sage and rosemary extracts. Dyeability of sage extract is often similar to rosemary extract regardless of dyeing conditions. Dyeing properties of herb colorants on cotton, silk and wool fiber and effect of dyeing conditions on dye uptake were also compared. Dyed fabric showed a yellowish color and the dyeing affinity was somewhat good with rosemary extract. The surface color of the dyed fabrics was darkened by mordant treatment. The K/S value of herb colorants of protein fiber was higher than cellulose fiber. The concentration of mordant having the highest dyeing affinity was different from the mordant type. Regardless of the type of fiber, the K/S value of premordanting was the highest in mordanting method, and the K/S value of simultaneous mordanting indicated no noticeable mordant effect. The fastness of washing of silk fabric was reduced the most by mordant treatment. The lightfastness was reduced in Al mordant treatment regardless of the type of fiber. The lightfastness of wool increased somewhat by mordant treatment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1276-1279
• /
• 2006

This article on environmental noise qualify is concerned with the relationships between the annoyance and perception and sound quality metrics according to exposition time for traffic noise. For invested the characteristics of noise quality, we conducted to the subjective experiments of the annoyance response using the absolute 100 scaling method for the traffic noise sources. The traffic noise sources are composed to varieties exposition time from 15sec to 1200sec. As the results, the first there are decreased the perception loud level for the increase of exposition time with logarithm scale, but increased the annoyance. Second, evaluation index of annoyance is correlated to the loudness(sones), tonality and logarithm scale time with R2=0.83. Also, the composition ratio of traffic noise according to exposition time has the change of range as the logarithm scale ($30{\sim}50%$), tonality($27{\sim}37%$) and loudness($34{\sim}20%$).

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.256-260
• /
• 2003

The paper is aiming at presenting the proper treatment method and procedures of ILW waste to both waste generators and acceptor so that the waste characteristics are satisfied with the WAC(Waste Acceptance Criteria) and as a result, the disposal facility would be operating safely. The ILW generators are responsible for reducing the volume of waste, treating and packaging the waste in order to meet the WAC, and acceptor has an obligation of inspecting the waste in conformity with the acceptance procedure established by regulation. Recently, a number of countries including France and USA examine the disposal acceptability of ILW waste by the WCP(Waste Package Quality Certification Program).

• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.232-241
• /
• 2004

KARI(Korea Aerospace Research Institute) is achieving the KSLV program according to National Space Technology Development Program. In this paper, the authors are intend to introduce the Integrated Power Plant(IPP) test facility which will be constructed for the variety of tests on KSLV program. IPP test facility refers to comprehensive testing equipment for liquid rocket launch vehicle. Using this facility, KARI can verify the adaptedness of parts and subsystems for launch vehicle and finally can qualify the system characteristics of launch vehicle doing kinds of test including hot firing test. IPP test facility will make it possible to simulate the vehicle launching circumstances and to predict the performance of launch vehicle during its flight test.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12S
• /
• pp.1195-1199
• /
• 2003

In this study, in order to develop the low temperature sintering ceramics for multilayer piezoelectric transformer, dielectric and piezoelectric properties of PSN-PZT[0.91Pb(Sb$\sub$1/2/Nb$\sub$1/2/)$\sub$0.03/(Zr$\sub$0.495/Ti$\sub$0.505/)$\sub$0.97/O$_3$-0.04Pb(Ni$\sub$1/2/W$\sub$1/2/)O$_3$+0.05BiFeO$_3$+0.3wt％MnO$_2$+0.6wt％CuO〕 ceramics were investigated according to Zr/Ti ratio. As Zr/Ti ratio is increased, electromechanical coupling factor(k$\sub$p/) and dielectric constant increased and then decreased after the ratio of Zr/Ti=50/50. Also, mechanical qualify factor(Q$\sub$m/) decreased and then increased after the ratio of Zr/Ti=50/50.

• Management & Information Systems Review
• /
• v.6
• /
• pp.187-204
• /
• 2001

As a competition between a country and a company becomes fierce and the quality information, reliability and quality guarantee of a product are more emphasized, quality has become an important strategic task of a company. A company today has a strategic quality management system for quality improvement in order to perform such a strategic task. The content of this are as follows. Classify the types of quality strategy of our manufacturing companies when the necessity of a strategic quality management increases in order to adapt to a rapidly changing management environment and study the characteristics of a quality management activity factor of quality strategy. The content and meaning of this analysis are summarized as follows. Confirmed qualify management activity in which quality strategy could be used by analyzing the effects by tendency of a quality management activity factor by quality strategy. It was a product/service factor that a quality management activity factor contrasted most clearly by tendency of quality strategy. Also, it can be said that this study set the foundation of quality strategy of our manufacturing company in a methodological way because this can be used in developing the theory and model of quality management and in verifying them by confirming and embodying the main area for successful quality management through comparing and analyzing factors related with main areas of quality management.