• 대한화학회지
• /
• 제61권1호
• /
• pp.12-15
• /
• 2017

We presented a mapping the work function of the vanadium pentoxide ($V_2O_5$) nanonet structures by scanning Kelvin probe microscopy (SKPM). In this measurement, the $V_2O_5$ nanonet was self-assembled via dropping the solution of $V_2O_5$ nanowires (NWs) onto the $SiO_2$ substrate and drying the solvent, resulting in the networks of $V_2O_5$ NWs. We found that the SKPM signal as a surface potential of $V_2O_5$ nanonet is attributed to the contact potential difference (CPD) between the work functions of the metal tip and the $V_2O_5$ nanonet. We generated the histograms of the CPD signals obtained from the SKPM mapping of the $V_2O_5$ nanonet as well as the highly ordered pyrolytic graphite (HOPG) which is used as a reference for the calibration of the SKPM tip. By using the histogram peaks of the CPD signals, we successfully estimated the work function of ~5.1 eV for the $V_2O_5$ nanonet structures. This work provides a possibility of a nanometer-scale imaging of the work function of the various nanostructures and helps to understand the electrical characteristics of the future electronic devices.

• Ocean and Polar Research
• /
• 제21권2호
• /
• pp.149-157
• /
• 1999

Surface sediment samples collected from the eastern half of the Yellow Sea proper in 1998 were analyzed for polycyclic aromatic hydrocarbons (PAHs), ubiquitous pollutants. Total PAHs concentrations varied from 1.0 to $320.5ng\;g^{-1}$ dw. Relatively high concentrations of PAHs were found in the muddy central part of the Yellow Sea. Sedimentary total PAHs concentrations in the Yellow Sea proper were similar to those of Californian offshores and the central Mediterranean Sea, albeit an order of magnitude lower than the Yellow Sea nearshore areas. Phenanthene/Anthracene concentration ratio of PAHs in bottom sediments suggested that pyrolytic PAHs might be dominant over petrogenic ones in the eastern Yellow Sea. Downcore depth distributions of PAHs from the relatively undisturbed core samples of the central Yellow Sea showed decreasing PAHs concentrations with core depths and suggested that the Yellow Sea has been increasingly exposed to PAH for decades. Annual total PAH flux to these sediments was estimated to be $166{\mu}gm^{-2}yr^{-1}$ in the central part of the Yellow Sea for the recent decade.

• 한국세라믹학회지
• /
• 제46권5호
• /
• pp.484-487
• /
• 2009

$SiC_f$/SiC composites with whiskers and pyrolytic carbon (PyC) coated whiskers in the matrix were fabricated for enhancement of the fracture behaviors by the whisker growing assisted chemical vapor infiltration (WA-CVI) process, respectively. $SiC_f$/SiC composites were also prepared by the conventional CVI process as reference material. The mechanical properties and fracture behaviors were analyzed by comparison of the two types of composites prepared by WA-CVI and conventional CVI. The densities of $SiC_f$/SiC composites were in the range of $2.6{\sim}2.65g/cm^3$. The flexural strengths of composite with whiskers and with those coated by PyC were 650 MPa and 600 MPa, respectively. The tensile strength of composites with whiskers was ${\sim}285$ MPa.

• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.223-228
• /
• 2012

ABS와 폴리에틸렌(Polyethylene, PE) 및 ABS-PE 혼합물의 저온열분해를 회분식 반응기를 이용하여 상압 및 $450^{\circ}C$에서 실행하였다. 열분해 시간은 20~80분까지 하였고 열분해로 생성된 성분은 지식경제부에서 고시한 증류성상온도에 따라 가스, 가솔린, 등유, 경유, 중유로 분류하였다. ABS와 PE의 혼합 폐플라스틱의 열분해 전환율은 PE의 함량이 증가할수록 증가하는 것으로 나타났다. 열분해생성물의 수율은 PE의 함량이 높을수록 중유 > 가스 > 가솔린 > 경유 > 등유 순으로 회수되었다.

• 한국환경과학회지
• /
• 제12권11호
• /
• pp.1145-1157
• /
• 2003

The surface sediments inside Hallim Harbor, one of the major harbors of Jeju Island, were sampled three times (June, September and December, 2001) and analyzed for 16 polycyclic aromatic hydrocarbons (PAHs), recommended by US-EPA as priority pollutants, to assess their distribution levels and to suggest their possible origins. The concentrations of PAHs ranged from 19 to 496 ng/g on a dry weight basis with a mean value of 245 ng/g, and the levels were low to moderate in comparison with other areas in the world. Based on comparisons of individual and total PAH concentrations with effects-based and equilibrium partitioning-based on sediment quality guidelines, the potential for the biological effects were expected to be low. The sedimentary PAHs may be correlated with organic carbon and mud contents to some extent. From the examinations of the four PAH origin indices, such as LMW/HMW (low molecular weight 2-3 ring PAHs over high molecular weight 4-6 ring PAHs), phenanthrene/anthracene ratio, fluoranthene/pyrene ratio, chrysene/benzo〔a〕anthracene ratio, it can be concluded that the sediment PAH contaminations were ascribed to both pyrolytic and petrogenic origins.

• Carbon letters
• /
• 제4권1호
• /
• pp.36-39
• /
• 2003

Carbon and carbon-based materials are used in nuclear reactors and there has recently been growing interest to develop graphite and carbon based materials for high temperature nuclear and fusion reactors. Efforts are underway to develop high density carbon materials as well as amorphous isotropic carbon for the application in thermal reactors. There has been research on coated nuclear fuel for high temperature reactor and research and development on coated fuels are now focused on fuel particles with high endurance during normal lifetime of the reactor. Since graphite as a moderator as well as structural material in high temperature reactors is one of the most favored choices, it is now felt to develop high density isotropic graphite with suitable coating for safe application of carbon based materials even in oxidizing or water vapor environment. Carboncarbon composite materials compared to conventional graphite materials are now being looked into as the promising materials for the fusion reactor due their ability to have high thermal conductivity and high thermal shock resistance. This paper deals with the application of carbon materials on various nuclear reactors related issues and addresses the current need for focused research on novel carbon materials for future new generation nuclear reactors.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.251-254
• /
• 2001

In this paper, we analysed the properties change of electric wire when the thermal stress was applied to NFR-8 and FR-PVC [600] wire. Measurement is made of the attenuation of a light beam by smoke accumulating with in a closed chamber due to nonflamining pyrolytic decomposition and flaming combustion. Results are expressed in terms of specific optical density which is derived from a geometrical factor and the measured optical density a measurement characteristic of the concentration of smoke. Referenced documents were ASTM E662 standard test method for specific Ds generated by solid materials. The furnace control system shall maintain the required irradiance level under steady-state condition with the chamber door closed of 2.5${\pm}$0.04[w/$\textrm{cm}^2$] for 20 min. According to the results of the smoke density analysis of NFR-8 and FR-PVC the highest decomposition flaming smoke density range of NFR-8 and FR-PVC were 7.2 to 77.5 and 51.1 respectively. Nonflaming smoke density range of NFR-8 and FR-PVC were 100.4 to 112.2 and 126.5 to 398.8. The amount of carbon monoxide generated was found to be much higher in FR-PVC decomposition than in NFR-8 due to incomp1ete combustion of FR-PVC which has high content of carbon in compound.

• 한국전기전자재료학회논문지
• /
• 제13권11호
• /
• pp.969-975
• /
• 2000

Laser direct writing of micro-patterned copper lines has been achieved by pyrolytic decomposition of copper formate films (Cu(HCOO)$_2$.4$H_2O$), as a metallo-organic precursor, using a focused CW Ar$^{+}$ laser beam (λ=514nm) on PCB boards and glass substrates. The linewidth and thickness of the lines wee investigated as a functin of laser power and scan speed. The profiles of the lines were measured by scanning electron microscope (SEM), surface profiler ($\alpha$-step) and atomic force measured by scanning electron microscope (SEM), surface profiler ($\alpha$-step) and atomic force microscopy (AFM). The electrical resistivities of the patterned lines were also investigated as a function of laser parameters using probe station and semiconductor analyzer. We compared resistivities of the patterned copper lines with these of the Cu bulk. Resistivities decreased due to changes in morphology and porosity of the deposit, which were about 3.8 $\mu$$\Omega$cm and 12$\mu$$\Omega$cm on PCB and glass substrates after annealing at 30$0^{\circ}C$ for 5 minutes.s.

• Journal of the Korean Wood Science and Technology
• /
• 제47권4호
• /
• pp.486-497
• /
• 2019

The non-isothermal and isothermal pyrolysis properties of H lignin and P lignin extracted from different biorefinery processes (such as supercritical water hydrolysis and fast pyrolysis) were studied using thermogravimetry analysis (TGA) and pyrolyzer-gas chromatography/mass spectrometry (Py-GC/MS). The lignins were characterized by ultimate/proximate analysis, FT-IR and GPC. Based on the thermogravimetry (TG) and derivative thermogravimetry (DTG) curves, the thermal decomposition stages were obtained and the pyrolysis products were analyzed at each thermal decomposition stage of non-isothermal pyrolysis. The isothermal pyrolysis of lignins was also carried out at 400, 500, and $600^{\circ}C$ to investigate the pyrolysis product distribution at each temperature. In non-isothermal pyrolysis, P lignin recovered from a fast pyrolysis process started to decompose and produced pyrolysis products at a lower temperature than H lignin recovered from a supercritical water hydrolysis process. In isothermal pyrolysis, guaiacyl and syringyl type were the major pyrolysis products at every temperature, while the amounts of p-hydroxyphenyl type and aromatic hydrocarbons increased with the pyrolysis temperature.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권2호
• /
• pp.41-49
• /
• 2022

To abate the environmental burdens arising from CO₂ emissions, biochar offers a strategic means to sequester carbons due to its recalcitrant nature. Also, biochar has a great potential for the use as carbon-based adsorbent because it is a porous material. As such, developing the surface properties of biochar increases a chance to produce biochar with great adsorption performance. Given that biochar is a byproduct in biomass pyrolysis, characteristics of biochar are contingent on pyrolysis operating parameters. In this respect, this work focused on the investigation of surface properties of biochar by controlling temperature and reaction medium in pyrolysis of pine sawdust as case study. In particular, CO₂ was used as reaction medium in pyrolysis process. According to pyrolytic temperature, the surface properties of biochar were indeed developed by CO₂. The biochar engineered by CO₂ showed the improved capability on CO₂ sorption. In addition, CO₂ has an effect on energy recovery by enhancing syngas production. Thus, this study offers the functionality of CO₂ for converting biomass into engineered biochar as carbon-based adsorbent for CO₂ sorption while recovering energy as syngas.