• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.150-151
• /
• 2006

Laser pyrolysis is a very suitable method for the synthesis of a wide range of nanoparticles. A pilot unit based on this process has been recently developed at CEA. This paper reports results showing the possibility to produce SiC and $TiO_2$ nanoparticles at rates of respectively 1 and 0.2 kg/h and also the possibility to adjust the mean grain size of the particles and their structure by changing the laser intensity and reactants flow rates. First tests of liquid recovery have been also successfully performed to limit the risks of nanoparticles dissemination in the environement during their recovery.

• 플랜트 저널
• /
• 제4권4호
• /
• pp.62-70
• /
• 2008

PGV(Plasma Gasification & Vitrification) system has been developed based on a pyrolysis melting gasification technology that provides the possibilities of acquiring renewable energy. As volume of wastes increases with the rapid industrialization and population growth, eco friendly disposal is drawing more social attention. Pyrolysis plasma technology is regarded as the best environmentally friendly process for the waste disposal among numerous waste disposal processes. Introduced in this paper is the behavior of the plasma torch and a computational fluid simulation dynamics is discussed for designing the melting furnace. Some PGV applications have also been discussed.

• 한국수소및신에너지학회논문집
• /
• 제13권1호
• /
• pp.42-51
• /
• 2002

Methane can be converted directly to hydrogen by pyrolysis. The reaction is highly endothemic and heat must be supplied at high temperatures. Gibbs free energy minimization calculations have been carried out for the methane pyrolysis to determine equilibrium products. The calculation parameters are the temperature, the initial H/C ratio, the pressure and Gibbs energies of each substance. Methane, ethylene, acetylene, benzene, naphthalene, and hydrogen are the main products. Excluding hydrogen, it is observed that ethylene and aromatics(benzene+naphthalene) are predominant products below 1400K, whereas acetylene is significantly formed above 1400K. Hydrogen dilution increases the selectivities for ethylene and acetylene and decreases the selectivity for aromatics. Increasing the pressure also decreases the decomposition of methane.

• 한국유체기계학회 논문집
• /
• 제14권1호
• /
• pp.34-41
• /
• 2011

Fire characteristics can be analyzed more realistically by using more accurate properties related to the fire dynamics and one way to acquire these fire properties is to use one of the inverse property estimation techniques. In this study two optimization algorithms which are frequently applied for the inverse heat transfer problems are selected to demonstrate the procedure of obtaining pyrolysis properties of charring material with relatively simple thermal decomposition. Thermal decomposition is occurred at the surface of the charring material heated by receiving the radiative energy from external heat sources and in this process the heat transfer through the charring material is simplified by an unsteady 1-dimensional problem. The basic genetic algorithm(GA) and repulsive particle swarm optimization(RPSO) algorithm are used to find the eight properties of a charring material; thermal conductivity(virgin, char), specific heat(virgin, char), char density, heat of pyrolysis, pre-exponential factor and activation energy by using the surface temperature and mass loss rate history data which are obtained from the calculated experiments. Results show that the RPSO algorithm has better performance in estimating the eight pyrolysis properties than the basic GA for problems considered in this study.

• 한국산학기술학회논문지
• /
• 제14권8호
• /
• pp.4028-4032
• /
• 2013

폐타이어 재활용을 위한 열분해 공법으로 발생하는 열분해 카본블랙의 재활용 방안이 필요하다. 아스팔트 바인더의 소성변형 특성을 개선하기 위하여 페타이어 열분해 공법의 부산물인 카본블랙을 이용하였다. 원아스팔트에 열분해 카본블랙 0%, 5%, 10%, 15% 및 20%를 혼합하였고, 연화점, 침입도시험, 회전점도계 및 동적전단유동기시험을 시행하였다. 열분해 카본블랙을 혼합한 아스팔트 바인더의 연화점은 증가하였고, 인화점은 기준값을 만족하였다. 135도에서의 회전점도값은 증가하였고, 소성변형에 대한 저항성이 개선되는 것으로 나타났다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.811-814
• /
• 2002

$(Ba,Sr)_2SiO_4:Eu^{2+}$ phosphor particles with high brightness were prepared by spray pyrolysis. The changes in the photoluminescence intensity and morphology of $(Ba,Sr)_2SiO_4:Eu^{2+}$ were investigated by changing the posttreatment temperature and the concentration of dopant. The prepared $(Ba,Sr)_2SiO_4:Eu^{2+}$ particles has a dense structure, but irregular shape after the posttreatment. When they were excited by the ultraviolet light of 410 nm, a broad emission band with a peak at 508 nm was observed. The photoluminescence intensity of the prepared $(Ba,Sr)_2SiO_4:Eu^{2+}$ particles was enhanced by increasing the posttreatment temperature up to 1300 $^{\circ}C$ and further improved by adding several rear-earth codopants. The $(Ba,Sr)_2SiO_4:Eu^{2+}$ particles prepared by spray pyrolysis had a good excitation spectrum in the wavelength longer than 350 nm. Therefore, it was concluded that the $(Ba,Sr)_2SiO_4:Eu^{2+}$ prepared by spray pyrolysis is a good green-emitting phosphor for LED application.

• 한국재료학회지
• /
• 제23권9호
• /
• pp.489-494
• /
• 2013

In this study, by using nickel chloride solution as a raw material, a nano-sized nickel oxide powder with an average particle size below 50 nm was produced by spray pyrolysis reaction. A spray pyrolysis system was specially designed and built for this study. The influence of nozzle tip size on the properties of the produced powder was examined. When the nozzle tip size was 1 mm, the particle size distribution was more uniform than when other nozzle tip sizes were used and the average particle size of the powder was about 15 nm. When the nozzle tip size increases to 2 mm, the average particle size increases to roughly 20 nm, and the particle size distribution becomes more uneven. When the tip size increases to 3 mm, particles with an average size of 25 nm and equal to or less than 10 nm coexist and the particle size distribution becomes much more uneven. When the tip size increases to 5 mm, large particles with average size of 50 nm partially exist, mostly consisting of minute particles with average sizes in the range of 15~25 nm. When the tip size increases from 1 mm to 2 mm, the XRD peak intensities greatly increase while the specific surface area decreases. When the tip size increases to 3 mm, the XRD peak intensities decrease while the specific surface area increases. When the tip size increases to 5 mm, the XRD peak intensities increase again while the specific surface area decreases.

• 한국재료학회지
• /
• 제27권6호
• /
• pp.325-330
• /
• 2017

Photoelectron-hole separation efficiency plays an important role in the enhancement of the photocatalytic activity of photocatalysts towards the degradation of organic molecules. In this study, $TiO_2/TiOF_2$ heterostructured composite powders with suitable band structures, which structures are able to separate photoelectron-hole pairs, have been synthesized using a simple and versatile ultrasonic spray pyrolysis process. In addition, their phase volume fractions have been controlled by varying the pyrolysis temperature from $400^{\circ}C$ to $800^{\circ}C$. The structural and optical properties of the synthesized powders have been characterized by X-ray diffraction, scanning electronic microscopy and UV-vis spectroscopy. The powder with a phase volume ratio close to 1, compared with single $TiOF_2$ and other composite powders with different phase volume fractions, was found to have superior photocatalytic activity for the degradation of rhodamine B. This result shows that the $TiO_2/TiOF_2$ heterostructure promotes the separation of the photoinduced electrons and holes and that this powder can be applicable to environmental cleaning applications.

• 유기물자원화
• /
• 제17권4호
• /
• pp.29-35
• /
• 2009

바이오매스를 바이오오일로 전환시기키 위하여 오거형의 반응조를 설계, 제작하여 실험하였다. 10.2L의 반응조는 $550^{\circ}C$를 유지하며 Batch식으로 운영하였다. 돈분뇨 혼합물, 돈분 왕겨혼합물, 돈분 톱밥혼합물 등 세 가지 혼합물을 대상으로 주(主) 구성성분인 헤미셀루로즈, 리그닌, 셀루로즈, 단백질, 지질(脂質)등을 화학적으로 분석하였다. 실험결과에 의하면 전섬유소 (holocellulose = hemicellulose + cellulose), 리그닌(lignin)의 함유량이 클수록 바이오오일 생산량은 많았으나, 회분(ash)함량은 현저한 감소를 나타내었다. 본 연구에서는 다양한 바이오매스기질을 평가하였으며, 돈분과 왕겨의 상관성은 거의 나타나지 않았으나 돈분과 톱밥의 상관성은 매우 높게 나타났다.

• 자원리싸이클링
• /
• 제17권5호
• /
• pp.66-75
• /
• 2008

국내에서 대표적으로 버려지는 폐벌목인 잣나무와 리기다소나무를 이용하여 고부가가치 제품으로 활용할 수 있는 활성탄 개발을 위해 목탄 제조의 최적조건을 측정하였다. 폐벌목 활성탄 제조에 관한 연구는 저온열분해 공정에 의한 폐벌목의 목탄 제조공정과 화학적 활성화반응을 이용한 목탄의 활성탄 제조공정으로 나누어지며 본 논문은 저온열분해에 의한 폐벌목의 목탄 제조공정을 다루고 있다. 실험결과, 목탄 제조공정의 경우 $150^{\circ}C$에서 6시간 건조 후 $500^{\circ}C$에서 60분 동안 열분해 공정을 거쳐 생성된 목탄이 요오드 흡착력과 비표면적(BET)등의 물성이 가장 우수하였으며 SEM사진을 관찰한 결과 이 조건에서 세공이 발달함을 알 수 있었다. 일반적으로 잣나무를 이용하여 제조된 목탄의 물성치가 리기다소나무를 이용한 목탄보다 우수함을 알 수 있었다. 본 연구의 최적 실험조건에서 잣나무를 이용한 목탄의 경우 BET값이 약 $640m^2/g$에 이르렀다.