• 제목/요약/키워드: pyrochlore

검색결과 174건 처리시간 0.028초

Pb(Mg1/3Nb2/3)O3계의 유전성에 미치는 BaTiO3첨가량 및 열처리 온도의 영향 (PMN-BaTiO3계 세라믹스의 합성 및 유전성) (Influence of BaTiO3 Content and Firing Temperature on the Dielectric Properties of Pb(Mg1/3Nb2/3)O3 Ceramics)

  • 윤기현;강동헌
    • 한국세라믹학회지
    • /
    • 제26권2호
    • /
    • pp.249-257
    • /
    • 1989
  • Dielectric properties and the stability of the perovskite phase in the Pb(Mg1/3Nb2/3)O3 system have been investigated as a function of amount of BaTiO3 and firing temperature. In the specimens fired at 120$0^{\circ}C$, the pyrochlore phase was eliminated by the addition of 10-15m/o BaTiO3 and also the dielectric constant increased. However, the dielectric constant decreased with further addition of BaTiO3 even though no pyrochlore phase was found to be present. The reducing tendency of the pyrochlore phase decreased with lowering the firing temperature in the system of Pb(Mg1/3Nb2/3)O3 with BaTiO3. Dielectric properties in PMN ceramics were affected by the character of the BaTiO3 rather than the pyrochlore phase.

  • PDF

Ca-Ce-Hf-Ti-O System에서의 파이로클로어 합성 (Synthesis of Pyrochlore in the System of Ca-Ce-Hf-Ti-O)

  • 채수천;배인국;장영남
    • 자원환경지질
    • /
    • 제37권4호
    • /
    • pp.375-381
    • /
    • 2004
  • 장주기 방사성 폐기물인 악티나이드 원소들을 고정화시킬 수 있는 파이로클로어 (pyrochlore; CaCeH$f_xTi_{2-x}O_7$=0.2, 0.6, 1.0, 1.4, 1.8, 2.0)를 합성하여 상평형 관계 및 특성을 연구하였다. 혼합된 시료는 상온에서 400kg/$cm^2$의 압력으로 성형한 후, 산소분위기에서 1200∼1$600^{\circ}C$ 범위로 소결온도를 변화시키면서 소성하였다. 합성된 시료는 XRD를 사용하여 상분석을 실시하였다. 실험결과, 파이로클로어의 최적 합성조건은 산소분위기 하에서, 각각의 조성에 따라, 1300∼150$0^{\circ}C$로 매우 다양하였다. 합성시 생성된 상으로는 페롭스카이트, 파이로클로어 및 $A_{2}BO_{5}$산화물 등이 있으며, 본 계의 특성은 Hf의 함량증가에 따라 페롭스카이트 및 파이로클로어의 격자상수가 증가한다는 점이다. 이같은 현상은 육배위 자리를 차지하고 있는 Hf와 Ti의 이온반경의 차이에서 비롯된 것이다.

Pyrochlore형 화합물 $In_2(Ti_{1.7}Zn_{0.3})O_{0.67}$$In_2(Ti_{1.7}Mg_{0.3})O_{6.7}$에서의 변조구조 관찰 (Observations on the Modulated Structure in Pyrochlore-type Compounds, $In_2(Ti_{1.7}Zn_{0.3})O_{0.67}$ and $In_2(Ti_{1.7}Mg_{0.3})O_{6.7}$)

  • 이확주;박현민;조양구;류현;남산
    • Applied Microscopy
    • /
    • 제29권4호
    • /
    • pp.471-477
    • /
    • 1999
  • Pyrochlore 구조를 갖는 $Lu_2Ti_2O_7$와 그와 유사한 구조를 갖는 화합물, $In_2(Ti_{1.7}Zn_{0.3})O_{6.7}$$In_2(Ti_{1.7}Mg_{0.3})O_{6.7}$에 대한 미세구조 관찰을 200kV에서 작동되는 HRTEM을 이용하여 관찰하였다. 두 화합물에서는 변조구조가 관찰되었으나 pyrochlore구조인 $Lu_2Ti_2O_7$에서는 관찰되지 않았다. 전자회절패턴 분석에서는 변조구조는 incommensurate이고 [220] 방향으로 sublattice의 2.69배로 그 주기가 0.953 nm인 초격자가 관찰되었다. 고분해능 격자상에서는 sublattice의 2배 또는 3배의 초격자들로 조합되며 평균적으로 2.7배로 그 주기가 0.967 nm가 되는 초격자상이 관찰되었다. 두 화합물의 결정구조는 입방정 pyrochlore 구조와 아주 유사하나 입방정 축은 $90^{\circ}$에서 약간 벗어난 구조를 갖는다. 변조구조는 전자빔에 의하여 점차적으로 변조구조가 없는 구조로 비가역적으로 변환된다.

  • PDF

고준위 핵페기물의 고정화를 위한 메트릭스 개발 : Ce파이로클로어 합성 연구 (Development of Matrix for the Immobilization of High Level Radioactive Waste : Study on the Synthesis of Ce-pyrochlore)

  • 채수천;장영남;배인국
    • 자원환경지질
    • /
    • 제35권2호
    • /
    • pp.97-102
    • /
    • 2002
  • Ce-파이로클로어(Ce-pyrochlore; CaCe $Ti_2 $O_7)는 장주기 방사성 폐기물인 악티나이드 원소들을 고정화시킬 수 있는 새로운 물질이므로 Ce-파이로클로어를 합성하여 강평형 관계 및 특성을 연구하였다. 혼합된 시료는 상온에서 200-400kg/$\textrm{cm}^2$의 압력으로 성형한 후, 1000-150$0^{\circ}C$ 범위에서 소결온도 및 분위기를 변화시키면서 소성하였다. 합성된 시료는 XRD, SEM/EDS를 사용하여 상분석과 정량분석을 실시하였다. 실험결과, Ce-파이로클로어이 최적 합성조건은 산소분위기 하에서, 130$0^{\circ}C$로 소결하였을 때였으며, 이때의 화학조성은 $Ca_{1-x}Ti_{2-y}O_{7-x-2y}$ (x=0.03-0.05, y=0.02~0.04) 으로써 비화학양론적인 특성을 보였다. Ce-파이로클로어는 1300~140$0^{\circ}C$에서 빠른 비조화 분해현상을 나타내었으며, 140$0^{\circ}C$ 이상에서는 페로브스카이트(perovskite)와 로파라이트(loparite; $Ce_{0.66}TiO_{3}$)사이의 부분 고용체인 Ce(III)페로브스카이트가 주요상으로써 관찰되었다.

Study on Engineering Barrier Role in Nuclear Waste Disposal

  • Hua, Zhang;Jianwen, Yang;Baojun, Li;Shanggeng, Luo
    • 한국방사성폐기물학회:학술대회논문집
    • /
    • 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
    • /
    • pp.73-82
    • /
    • 2004
  • This paper studies the leaching behaviors of pyrochlore-rich synroc incorporated 46.8wt% simulated actinides waste under the five simulated geological disposal media, which included the bentonite, granite, granite + ferroferric oxide, granite + cement, bentonite + ferroferric oxide, respectively. The mass loss rates reached to equilibrium after 182 day and was 10-7 g/$\textrm{mm}^2{\cdot}d$. That suggests the mass loss rate of pyrochlore-rich synroc, loaded 46.8wt% actinides waste, was very low. The surfaces of the leached specimens were analyzed by XRD, SEM/EDS. The experimental results show that the pyrochlore-rich synroc samples in the systems, which contained bentonite and cement, have two new phases formed on the leached specimens surface at $90^{\circ}C$ for 728d; The bentonite and cement can retard the elements leaching; $Fe_3O_4$ can speed the elements leaching; Expect for Ti ion depleted on the sample surface, other ion, such as U, Zr, AI, Ca, were in equable states and Ba ion was enriched during test time, which indicated the simulated disposal media have good ability to retard the leaching behavior of the pyrochlore-rich synroc.

  • PDF

열차폐코팅용 La2Ce2O7−Gd2Ce2O7−Y2Ce2O7 Pyrochlore계의 고온 열전도도 (High Temperature Thermal Conductivities in La2Ce2O7−Gd2Ce2O7−Y2Ce2O7 Pyrochlore System for Thermal Barrier Coatings)

  • 윤소영;이성민;심광보;김형태
    • 한국세라믹학회지
    • /
    • 제44권7호
    • /
    • pp.387-392
    • /
    • 2007
  • Thermal conductivities in $La_2Ce_2O_7-Gd_2Ce_2O_7-Y_2Ce_2O_7$ ternary system have been investigated. Pyrochlore phases formed at all ternary compositions and their sinterbilities were decreased with La addition. Thermal conductivities showed a minimum value at $La_2Ce_2O_7$ with moderate increases as $Y^{3+}$ and $Gd^{3+}$ ions replaced $La^{3+}$. Thermal expansion anomaly observed in $La_2Ce_2O_7$, which might be detrimental to TBC application, were suppressed by $Y^{3+}$ and $Gd^{3+}$ additions, with resultant thermal conductivities, $1.3{\sim}1.5 W/mK$ at $1000^{\circ}C$.