• 대한방사선기술학회지:방사선기술과학
• /
• 제32권1호
• /
• pp.87-93
• /
• 2009

배경/목적 : 경추골동맥 기시부의 동맥경화증은 경추기저 국소빈혈증의 위험인자 중 하나이기 때문에 경추골동맥 기시부를 확인해야 할 필요가 있다. 색도플러 초음파검사에 의한 경추골동맥 기시부의 관찰 및 평가는 기술적으로 어려움이 있으며, 특히 왼쪽 기시부는 더욱 그렇다. 이 연구의 목적은 색도플러 초음파검사 시경추골동맥 기시부의 관찰률을 높이는 것이다. 대상 및 방법 : 경동맥을 포함한 경추골동맥의 색도플러 초음파검사가 198명에 대해 시행되었다. 경추골동맥 기시부를 다른 혈관의 기시부와 더 쉽게 구분하기 위해 목 윗부분의 경추동맥에서부터 쇄골하동맥 측으로 검사를 시행하였다. 검사 기술적으로 경추골동맥 기시부가 바로누운자세의 자연스러운 위치에서 관찰되지 않을 경우, 초음파 트랜스듀서를 쇄골 측으로 밀고, 그래도 관찰되지 않을 경우 다른 손으로 어깨를 밀어 관찰을 시도하였다. 경추골동맥 기시부의 깊이와 위 세 가지 방법 및 그에 따른 관찰률을 확인하기 위하여, 검사된 초음파 영상에서 관찰된 경추골동맥 기시부의 위치를 3.0 cm 이하와 그 이상으로 구분하였다. 결 과 : 오른쪽 경추골동맥 기시부는 97%, 왼쪽 경추골동맥 기시부는 92%에서 관찰되었다. 3.0 cm 이하에서 관찰된 오른쪽 경추골동맥 기시부 중 자연스러운 자세, 트랜스듀서 밀기, 그리고 어깨 밀기에서 관찰된 경우는 각각 98.6%, 1.4%, 그리고 0.0%이었다. 그리고 3.0 cm 보다 더 깊은 위치에서 관찰된 오른쪽 경추골동맥 기시부 중 자연스러운 자세, 트랜스듀서 밀기, 그리고 어깨 밀기에서 관찰된 경우는 각각 81.2%, 14.6%, 그리고 4.2%이었다. 3.0 cm 이하에서 관찰된 왼쪽쪽 경추골동맥 기시부 중 자연스러운 자세, 트랜스듀서 밀기, 그리고 어깨 밀기에서 관찰된 경우는 각각 85.4%, 10.7%, 그리고 3.9%%이었다. 그리고 3.0 cm 보다 더 깊은 위치에서 관찰된 오른쪽 경추골동맥 기시부 중 자연스러운 자세, 트랜스듀서 밀기, 그리고 어깨 밀기에서 관찰된 경우는 각각 55.7%, 30.4%, 그리고 13.9%이었다. 결 론 : 경추골동맥의 색도플러 초음파검사에서 그 기시부가 바로누운자세의 자연스러운 위치에서 관찰되지 않을 경우, 초음파 트랜스듀서를 쇄골 측으로 밀거나 그래도 관찰되지 않을 경우 다른 손으로 어깨를 밀어 관찰을 시도한다면, 관찰률을 좀더 높일 수 있을 것으로 사료된다.

• 한국군사과학기술학회지
• /
• 제19권6호
• /
• pp.721-729
• /
• 2016

CCN(Content-Centric Network) enables users to retrieve content using the content's name. Researchers face critical challenges in terms of mobility. Since the routing information is part of the content name, when the provider moves, it is necessary to update all the routers routing information. However, this requires significant costs. In this paper, we propose PNPCCN(Proactive Neighbor Pushing CCN), considering the popularity and rarity of mobility support, for providers in CCN environments. Via simulation studies, we demonstrate that our solutions are effective in terms of shorter numbers of retransmitted Interest packets, and average download times and higher delivery ratios during mobility.

• 산업경영시스템학회지
• /
• 제21권45호
• /
• pp.145-154
• /
• 1998

The effects of secondary task on driving performance and subjective workload were investigated during a simulated driving. The driving performance was determined by the appropriateness of break timing. The driving simulator was provided by the Korea Road Traffic Safety Association. The subjective workload was tested by using a multidimensional measure such as NASA-TLX. Road was categorized into two types: narrow alley and wide street. The secondary task included pushing the number on the cellular phone, pushing radio channel, and conversing with a passenger. Seventeen subjects volunteered in the study. The data were analyzed by using SAS. Results showed that using the cellular phone and pushing channel during driving caused 3∼22% decline of driving performance and 42∼59% increase of subjective workload respectively. These results indicated that the secondary task could be potentially dangerous although there was not a significant performance decrease due to the notable increase of mental workload. In the future, if we can use a more sensitive and realistic driving simulator, the effects of secondary task under a dynamic driving situation can be investigated.

• The Journal of Korean Physical Therapy
• /
• 제21권4호
• /
• pp.31-36
• /
• 2009

Purpose: Pusher syndrome in stroke patients is the tendency to push strongly toward the paretic side with the non-affected limbs. The purpose of this study was to estimated inter-rater and intra-rater reliability of the Scale for Contraversive Pushing (SCP). Methods: Fourteen patients in the acute phase after stroke onset were diagnosed with pusher syndrome. Two physical therapists randomly assessed the same patients on different occasions on the same day. Almost all patients were assessed on more than one day. The inter-rater and intra-rater reliability of the SCP was estimated by calculation of the intraclass correlation coefficient (ICC). Results: The intra-rater reliability of the SCP ranged from 0.87 to 0.97; the inter-rater reliability of the SCP ranged from 0.71 to 0.99 in sitting and standing positions. These results show good reliability for the calculated variables. Conclusion: The results provide support for the use of the SCP in assessing pusher syndrome based on its reliability in stroke patients. It may use the standardized clinical assessments in clinical implication.

• Korean Journal of Radiology
• /
• 제24권11호
• /
• pp.1057-1058
• /
• 2023

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.587-590
• /
• 2005

Reactive plans for a box-pushing task of a mobile robot are automatically built up, where sequential action plans are found in a configuration space by A* algorithm for various initial configurations. Then, conjunction of conditions to associate with a same behavior are found by a back tracking algorithm. And corresponding reactive plans are generated. Finally, a clustering technique is applied to identify which reactive plan should be applied for a given perceptual condition. Several simulation results are shown to justify our proposed approach.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.93-94
• /
• 2016

The resistance of crowd pressure is an important performance to be influential on safety of facility users among performances required for light weight walls of public facilities. This study has empirically evaluated the estimation of size of crowd pressure to be applied to a wall of structure. For the load analysis test, the force plate with stiffness of 28 kN/cm was designed and manufactured. For inspectors, 15 males in the age of 20s were selected. The action of putting load was set as instantaneous push of plate and continuous push. As the load was increased linearly from the weight of inspector, the size of load was indicated as the load ratio. In case of instantaneous force, about 1.18 times the weight of pushing personnel was acted as a load. In case of continuous push, about 0.80 times the weight of pushing personnel was acted as a load.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.339-342
• /
• 1988

Typical magnetic bubble propagation failure modes of ion implanted magnetic bubble computer memory devices were observed and their failure mechanisms were analize. The skidding failure mode is due to the pushing of a strong repulsive charged wall. If this pushing is stronger than the edge affinity of the bubble in the cusp, the bubble moves out of the cusp when it is supposed to stay there. The stripeout failure modes across the adjacent track or along the track can be explained by considering the relative strength of the charged wall and the edge affinity encountered by both ends of the stripe. The skipping of the first cusp of a track is believed to be due to the whipping motion of the charged wall. The bubble moves directly to the second cusp via the long charged wall pointing to the second cusp skipping the first cusp.

• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.43-52
• /
• 1999

In this study, the vibration damping characteristics of the powered hand tools transmitted in hand-arm system were examined and compared. The types of powered tools for the experiment are general typed drill, impact drill, grinder, and wire brush. To analyze the characteristics of vibration damping, the magnitude of acceleration of vibration on X, Y, and Z direction at tool, hand, wrist, and the joint between forearm and upper arm were measured respectively. The results indicated that impact drill generated the highest value of acceleration of vibration among the four types of tools used in the experiments. The highest value of the amount of acceleration of vibration was found in the direction of Y. And the amount of acceleration of vibration was significantly affected by the type of tool, type of work, and pushing forces. As become the more distant from the tool, the smaller the amount of acceleration of vibration. Also, the bigger the pushing force at the tool, the higher the acceleration of vibration.

• 대한산업공학회지
• /
• 제42권3호
• /
• pp.165-172
• /
• 2016

The purpose of this study is to investigate the ergonomic verification of suitability of the 4-wheeled hand cart to prevent musculoskeletal problems in the firing test range. Because of the increasing amount of firing test, the needs to develop a projectile transferring device such as 4-wheeled hand cart has been increased. For the 4-wheeled hand cart, the lifting and carrying activity in the manual handling method were transformed to pushing activity. The risk of low back pain for lifting and carrying the projectile by manual was estimated by NLE and 3D SSPP. On the other hand, the risk for pushing the 4-wheeled hand cart was estimated by psychophysical and biomechanical method such as Mital's equation, Snook's table and 3D SSPP. It was shown that the 4-wheeled hand cart reduced the risk of low back pain drastically with higher efficiency and design compatibility.