• Korean Journal of Metals and Materials
• /
• v.50 no.12
• /
• pp.907-911
• /
• 2012

High purity silicon can be obtained from Al-Si alloys by a combination of solvent refining and centrifugation. Silicon purification by crystallization of silicon from an Al-Si alloy melt was carried out using 2N and 4N purity aluminum and 2N purity silicon as raw materials. The effect of the purity of raw materials on the final silicon ingot purity by centrifugation was investigated for an Al-50 wt% Si alloy. Alloys were melted using an electrical resistance furnace, and then poured into a centrifuging apparatus. A silicon lump like foam was obtained after centrifugation and was leached by an acid in order to get pure silicon flakes. Then silicon flakes were melted to make a silicon ingot using an induction furnace. The purities of the silicon flakes and silicon ingot were enhanced significantly compared to those of the raw materials of silicon and aluminum. The silicon ingot made of 4N aluminum and 2N silicon showed the lowest impurities.

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.2
• /
• pp.7-10
• /
• 2009

Effects of $BaCO_3$ purity on the superconducting properties of top seeded melt growth (TSMG) processed $Y_{1+x}Ba_2Cu_3O_{7-y}$ (Y1+x, x=0.1 and 0.2) superconductors were investigated. $YBa_2Cu_3O_{7-y}$ (Y123) powder prepared using $BaCO_3$ with 99.75% purity and commercially available Y123 powder of 99.9% were used for the fabrication of single Y123 grain superconductors. $T_c$ values of the Y1+x samples prepared using low purity Y123 powder were slightly lower than those of the samples prepared using a high purity powder. In addition to the lower $T_c$, an anomalous peak effect in the intermediate magnetic fields was observed in Y1+x samples prepared using the low purity $BaCO_3$ powder. The slight decrease in $T_c$ and the anomalous peak effect are ascribed to the possible incorporation of a Y123 phase with impurity elements such as strontium and calcium included in the $BaCO_3$powder of 99.7%. The result suggests that the low purity $BaCO_3$ powder of a low price can be used as a raw power for the fabrication of single grain YBCO bulk superconductors.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.349-352
• /
• 2014

Anodic alumina oxide (AAO), a self-ordered hexagonal array, has various applications in nanofabrication such as the fabrication of nanotemplates and other nanostructures. In order to obtain highly ordered porous alumina membranes, a two-step anodization or prepatterning of aluminum are mainly conducted with straight electric field. Electric field is the main driving force for pore growth during anodization. However, impurities in aluminum can disturb the direction of the electric field. To confirm this, we anodized two different aluminum foil samples with high purity (99.999%) and relatively low purity (99.8%), and compared the differences in the surface morphologies of the respective aluminum oxide membranes produced in different electric fields. Branched pores observed in porous alumina surface which was anodized in low-purity aluminum and the size; dimensions of the pores were found to be usually smaller than those obtained from high-purity aluminum. Moreover, anodization at high voltage proceeds to a significant level of conversion because of the high speed of the directional electric field. Consequently, anodic alumina membrane of a specific morphology, i.e., meshed pore, was produced.

• Journal of the Korean Ceramic Society
• /
• v.46 no.5
• /
• pp.528-533
• /
• 2009

High purity $\beta$-SiC powders were synthesized using sol-gel processing. TEOS and phenol resin were used as the starting material for the silicon source and carbon source, respectively. The process turned out to be capable of producing high purity SiC powder purity degree with 99.98 %. However, it was difficult to control the shape and size of $\beta$-SiC powders synthesized by sol-gel process. In this study, $\beta$-SiC powder with size of $1{\sim}5$ um an 30 nm were used as the seeds for $\beta$-SiC to control the $\beta$-SiC powder morphology. It was found that $\beta$-SiC powder seeds was effective to increase the powder average size of synthesized $\beta$-SiC using sol-gel process by acting as the preferred growing sites for $\beta$-SiC.

• Journal of the Korean Society of Costume
• /
• v.43
• /
• pp.41-52
• /
• 1999

This study is to compare and analyze two types of 'transparency' concept expressed in architecture and garment which has not only been an important theme in the post-modern expression of architeture but been shown in various types of concept. This study examined the characteristics of transparency and through theoretical studies divided them into four types; frankness(purity ambiguity comparison exposure and eroticism) Purity building would use the matrial which is transparent glasses for the expprssion of its purity and clothing would use the transparent matrial for the expression of the natural beauty of human body and the purity of human of itself. Ambiguity is expressed in the outer side of architecture by duplicating transparent materials and by phenomenon of optical illusion and inflection. On the contrary in garment it is shown in the outward formation of underclothing. Comparison in architecture is expressed by the use of void but opaque materials as well as solid but transparent materials. Extinction is expressed with the visual effect of context of the surrounding by the use of opaque glass and reflexive glass. In garment the effect of comparison is expressed by the use of mixing transparent materials and opaque materials. Building would express the inside of itself by the way of its exposure and clothing would also express its frankness through the human body is partly opened or clossed at the same thime that arises from eroticism of the way of the expression of human feelings.

• Journal of Microbiology
• /
• v.38 no.2
• /
• pp.99-104
• /
• 2000

Hydrogen peroxide has been used in cleaning the piping of an advanced high-purity water system that supplies ultra-high purity water (UHPW) for 16 megabyte DRAM semiconductor manufacturing. The level of hydrogen peroxide-resistant bacteria in UHPW water was monitored prior to and after disinfecting the piping with hydrogen peroxide. Most of the bacteria isolated after hydrogen peroxide disinfection were highly resistant to hydrogen peroxide. However, the percentage of resistant bacteria decreased with time. The hydrogen peroxide-resistant bacteria were identified as Micrococcus luteus, Bacillus cereus, Alcaligenes latus, Xanthomonas sp. and Flavobacterium indologenes. The susceptibility of the bacteria to hydrogen peroxide was tested as either planktonic cells or attached cells on glass. Attached bacteria as the biofilm on glass exhibited increased hydrogen peroxide resistnace, with the resistance increasing with respect to the age of the biofilm regrowth on piping after hydrogen peroxide treatment. In order to optimize the cleaning strategy for piping of the high-purity water system, the disinfecting effect of hydrogen preoxide and peracetic acid on the bacteria was evaluated. The combined use of hydrogen peroxide and peracetic acid was very effective in killing attached bacteria as well as planktonic bacteria.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.4
• /
• pp.757-768
• /
• 1997

The purpose of this study was to identify the effect of religious habits and hair styles on korean catholic sister's impression. The subject consisted of 256 female high school students and 256 female undergraduated students The experimental materials developed for this study were 16 color photographs stimuli of drawing and 7-point semantic differential scale composed of 30 bipolar adjectives representing personal traits. The major findings drawn from this study were as follows: 1) Four factors emerged to account for the dimentional structure of the impression of the Korean catholic sister's in religious habits. Four factors involved purity, formality, potency, appearance. 2) The clothing types and hair styles had significant effect on purity, formality, potency, appearance. The clothing types had an effect on purity, formality and potency while the hair styles affected formality. 3) Perceiver's age influenced impressions formed by clothing and hair styles. Female high school students were affected by clothing and hair styles in formality, potency, appearance while female undergraduate students in purity, formality, potency. Therefore the religious habits and hair styles had significant effect on korean catholic women's impression of purity, formality, potency, appearance and impression formation was varied according to perceiver's age.

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.3
• /
• pp.198-203
• /
• 2009

Isatis tinctoria var. yezoensis (Ohwi) Ohwi (Cruciferae) is one of major natural dyeing crops in the world and also have used as a medicinal plant in Korea. We evaluated seed purity in $F_1$-hybrid accessions using amplified fragment length polymorphism (AFLP) markers. One hundred sixty seeds from the male and female harvests were subsequently screened for seed purity with ten primers. The 13 accession-specific bands and many variable AFLP bands scored for accessions. Especially, E-AAC/M-CAA and E-AAG/M-CAT were presented clear hybrid bands for $F_1$ hybrids. $F_1$ hybrids maintained higher average level of genetic diversity compared with their correspondent parents. Self-inbred seeds from the female and male harvests were revealed 8.0% and 5.0%, respectively. The AFLP may lead to a better insight in to the hybrid seed purity test in I. tinctoria var. yezoensis.

• Korean Journal of Metals and Materials
• /
• v.47 no.6
• /
• pp.331-337
• /
• 2009

To lower the annealing temperature and the deviation of the mechanical properties of bake hardening steels, high purity steels were investigated. The steels were characterized by treating at low recrystallization temperature. It was confirmed that the strengthening originated from the solid solution of carbon and the ferrite grain refinement by fine MnS precipitates as carbon and sulfur contents increased in high purity steels. However, it was observed that there was no more increase of strength in steels containing over 40 ppm of carbon. It was considered that the excess carbon formed either the carbon cluster or the low temperature unstable carbides which had the negligible effect on the strengthening because they were reported to be highly coherent with the matrix. The carbon cluster and unstable carbides could be transformed to the stable cementite during bake hardening treatment. MnS was not observed in the high purity steel containing 5 ppm S, resulting in very coarse recrystallized grains and good ductility. As sulfur content increased, the recrystallized grain size decreased due to the formation of the fine MnS precipitates.

• Journal of the Korean Vacuum Society
• /
• v.5 no.2
• /
• pp.156-160
• /
• 1996

The purity dependence of the Curie point and the critical exponent of heat capaicty has been studied by measuring the resistvity of nickel samples with several different purities. The resistivity was measured by the 4-point ac method with a lock-in amplifier. The Curie points determined from in-phase and out-of-phase signals were found to be consisten twith each other . We found that the Curie point and the critical exponent of heat capacity did not depend on the purity of samples.