• 한국자동차공학회논문집
• /
• 제24권5호
• /
• pp.566-574
• /
• 2016

Fiber metal laminates, which are hybrid materials consisting of metal sheets and composite layers, have contributed to aerospace and automotive industries due to their reduced weight and improved damage tolerance characteristics. In this study, the impact performance of the laminates, which are comprised of a self-reinforced polypropylene and two aluminum sheets, and the pure aluminum alloy sheet material were investigated experimentally via numerical simulation. In order to compare the impact performance, the laminates and aluminum alloy were examined by assessing the impact force, energy time histories, and specific energy absorption. ABAQUS is a commercial software that is used to simulate the actual drop-weight tests. Based on this study, it is noted that the impact performance of the laminates was superior to that of the aluminum alloy. In addition, a good agreement between the experimental and numerical results can be achieved when the impact force and energy time histories from the experiments and the numerical simulations are compared.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.33-36
• /
• 2006

The effective thermal conductivities of $Mm\;(La_{0.6-0.8})\;Ni_{4.0}Co_{0.6}Mn_{0.2}Al_{0.2}$ (TL-492) with hydrogen and helium have been examined. Experiment results show that pressure has great influence on effective thermal conductivity in Low pressure range (below 0.5 MPa). And that influence decreases rapidly with increase of gas pressure. The reason is at low pressure, the mean free path of gas becomes greater than effective thickness of gas film which is important to the heat transfer mechanism in this research. And, carbon fibers have been used to try to enhance the poor thermal conductivity of TL-492. Three types of carbon fibers and three mass fractions have been examined and compared. Naturally, the highest effective thermal conductivity has been reached with carbon fiber which has highest thermal conductivity, and highest mass fraction. This method has acquired 4.33 times higher thermal conductivity than pure metal hydrides with quite low quantity of additives, only 0.99wt% of carbon fiber. This is a good result comparing to other method which can reach higher effect ive thermal conductivity but needs much higher mass fraction of additives too.

• 한국잠사곤충학회지
• /
• 제2권
• /
• pp.1-31
• /
• 1962

본 연구는 견사중의 Cystine 성분을 가잠전과정을 통하여 기존재를 확인하고 견사구조중에서 cross linkage를 조성하고 있음을 확인하는데 있으며 다음과 같은 결론을 얻었다. 1. Cystine 결정체를 Folin 씨 방법으로 견사로부터 분리하였다. 2. 견사 및 그와 관련있는 과정에서 Sullivan 씨 방법으로 다음과 같이 분석하였다. 시료 Cystine 함유량 ％ A. 상엽단백질 0.175 B.잠란 0.33 C. 잠체 (탈지, 숙잠, 견사선제외) 0.41 D. 견사선 (숙잠) 1.23 E. 잠 0.0 F. 잠통 (탈지) 0.30 G. 잠아 (탈지) 0.60 H. 생계 0.22 I. Fibroin 0.175 J. Sericin 0.30 3. 잠체내의 Cystine 존재는 상엽에서 0.175%, 견사선에서 0.12%의 Methionine을 확인함으로 생화학적의의와 더불어 재확인하였다. 4. 견사선내의 Sulfhydryl 화합물은 Sericin과 Methionine으로 전환하는 동시에 전자는 액상견으로 분비되어 견사를 구성하고 후자는 영양목적으로 견사선세포 육성에 사용되는 것으로 믿어진다. 5. Cystine 성분량은 상품종, 잠품종, 자웅성, 육종과정과 사육환경에 따라 변화한다. 6. 잡종강세로 육성된 교잡종은 원잠종보다 효과적인 성장을 위하여 더욱 많은 영양성 아미노산을 필요로 한다. 7. 여기한 관찰을 통하여 견사중 아미노산조성은 어느정도 변화하는 것이며 Cystine은 섬유의 무정형부분 특히 Sericin에 함유되고 있다. 8. 순수한 Cystine 또는 양모 Cystine을 첨식한 결과 하등의 이익점을 초래하지 못하였음으로 상엽중에 함유되어있는 Cystine과 Methionine 함유량은 잠아의 영양생리에 충분한 것으로 보인다. 9. 견사중의 disulfide cross linkage는 Harris 씨 방법과 여러가지 염류와 산에 의한 수축현상으로 확인하였고 양모와 대조하여 시험하였다. 10. 본 연구중 견사의 사상구조와 액상견의 입망상구조를 현미경으로 포착하였다. 액상견의 입망상은 입상 peptide의 OH ion과 물의 H ion의 인력관계로 형성되고 있다는 것을 기 film의 배열상태로 고찰하게 되었고 상엽단백질의 입망상은 견사의 사상형성에 적당한 사료임을 보이고 있다. 11. 본 논문을 통한 Cystine 존재는 비록 그 량이 적지마는 견사중의 Cystine 전무에 대한 종래관념을 전환시킬 것이다.

• 한국가정과학회지
• /
• 제5권2호
• /
• pp.55-74
• /
• 2002

This study, observing each respectively packaged Kongdduk during 12-day storing period and comparing it with unpackaged Kongdduk, through a cross-sectional view of its fiber and temperament, through a sensory evaluation rheometer measurement of rheological change depending on storing period and packaging type and through the organic acid content, micro-organic change, and retrogressive process. The results are as follows: 1. Kongdduk made of bean oil shows better chewiness, cohesiveness, and moistness than Kongdduk made of bean flour while Kongdduk made of bean flour shows better rheological properties as to roasted nutty taste or roasted nutty order. 2. The test of the cutted loaves of Kongdduk shows that adding oil of proper proportion to the dough of steamed rice cake in accordance with the amount of rice flour has a good influence on rheological properties of softness. 3. Rice cakes were prepared by addition of yellow soybean flour or peanut flour and packaged with CMP or VP, and their physical characteristics were monitored by sensory evaluation and mechanical measurement while storing for 6 days. For VP samples, yellow soybean rice cake showed little changes in cohesiveness, moistness and chewiness for 6 days of storage, while pure rice cake and peanut rice cake showed an increase in strength and hardness from the 4th day of storage. In case of CMP, yellow soybean rice cake hardly showed a difference in cohesiveness, moistness and chewiness for 6 days, while pure rice cake and peanut rice cake showed a significant difference from the 4th day in sensory evaluation. 4. For rheometer measurement, yellow soybean rice cake with CMP or VP showed little changes in strength or hardness for 6 days, while peanut rice cake and pure rice cake showed a drastic decrease in cohesiveness, from the End day and adhesiveness from the 4th day of storage. As there was no remarkable difference or deterioration for 6 days of storage in yellow soybean rice cake between CMP and VP, the ingredients of rice cakeappeared to be more important than the type of packaging in terms of quality deterioration of rice cake. 5. As the storing period passed by, organic acid is detected less at CMP-packaged Knngdduk than at wrapped. and its increasing speed proves to be slower as well. 6. The one wrapped with plyethylene film began to get moldy from pure rice cake or Kongdduk (rice cake mixed with yellow soybean or peanut) after 6 days, and more and more modly after 9 daysor after 12 days, but the CMP-packaged ones didn't get modly until 12 days or more. 7. CMP-packaged Kongdduk showed higher enthalpy of retrogradation than PE-wrapped one. As storing Period Passed by, Kongdduk,s enthalpy grew high. That is to say, it shows that Kongdduk got retrograded.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.105-108
• /
• 2002

Materials, matrices mixed with various kinds of conductive or magnetic powder, such as ferrite, have been used as the electromagnetic wave absorbing ones, so called RAM(radar absorbing material). The structure that does not only have electromagnetic waves absorbing property like RAM but also supports loads is called RAS(radar absorbing structure). One of the existing manufacturing process of RAS is to compound with conductive powders the glass fiber-reinforced composite with good permeability and the ability to support loads. The process, however, causes a number of problems, such as the degradation in the mechanical properties of the composite, especially, interlamina shear strength. In this study, mechanical properties of glass fabric/epoxy composite containing 7wt% carbon black powders were measured and compared with pure glass fabric/epoxy composites.

• 한국염색가공학회지
• /
• 제15권6호
• /
• pp.47-54
• /
• 2003

To be dyed with cationic Berberine, the cotton fiber was modified with reactive anionic agent. The Berberine, a natural cationic colorant of pure yellow, is the major component of Amur Cork tree extract and also can be employed as a natural antimicrobial agent due to its characteristic of cationic quaternary ammonium salt. By LC/MS analysis, it became obvious that the Berberine was contained in Amur Cork tree extract as a major color component. The adsorption of the Berberine on the cotton fabrics pretreated with the anionic agent was greatly increased comparing to that of untreated fabric. Because the anionic agent was colorless, it did not cause unintended color change of the dyeings. The dyed fabric with the Berberine has strong antimicrobial activity showing 99.5% of reduction of bacteria against Staphylococcu aureus.

• 한국염색가공학회지
• /
• 제21권5호
• /
• pp.21-26
• /
• 2009

In order to analyze numerically the hydrophobicity of the new dyes synthesized for unmodified pure polypropylene fibers, the octanol-water partition coefficient (logP), which is one of molecular descriptors representing hydrophobicity of organic compounds, was obtained by a semi-empirical method using Chem3D software. For the dyes of higher logP than around 5, the affinity of the dyes towards unmodified polypropylene fiber was substantial. In contrast to the new dyes for polypropylene, conventional disperse dyes have logP values lower than 5 and exhibited poor affinity.

• Computers and Concrete
• /
• 제16권1호
• /
• pp.1-16
• /
• 2015

The proposed techniques to strengthen concrete members such as steel plates, polymers or concrete have important deficiencies in adherence and durability. The use of UHPFC plates can overtake effectively these problems. In this paper, the possibility of using UHPFC to strengthen RC beams under torsion is investigated. Four specimens of concrete beams reinforced with longitudinal bars only were tested under pure torsion. One of the beams was considered as the baseline specimen, while the others were strengthened by ultra-high-performance fiber concrete (UHPFC) on two, three, and four sides. Finite element analysis was conducted in tandem with experimental work. Results showed that UHPFC enhances the strength, ductility, and toughness of concrete beams under torsional load, and that finite element analysis is in good agreement with the experimental data.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.132-132
• /
• 2006

Filler loading (fiber or particulate) usually increases the melt viscosity of polymers. In contrast, the addition of these fillers and fibrillation of thermotropic liquid crystalline polymer (LCP) jointly decreased the viscosity of polymer melts to lower than those of pure component polymers, filler-loaded or LCP-blended ones; and even decreased the viscosity with increasing filler loading. Termed as rheological hybrid effect, this phenomenon correlated well with the LCP fibrillation in these ternary systems. Research taking fillers of various shapes and sizes showed that the filler addition promoted the LCP fibrillation, depending upon thermodynamic and dynamic factors involved.

• Fibers and Polymers
• /
• 제5권2호
• /
• pp.105-109
• /
• 2004

The synthesis of titanium dioxide nanofibers with 200-300nm diameter was presented. The new inorganic-organic hybrid nanofibers were prepared by sol-gel processing and electrospinning technique using a viscous solution of titanium isopropoxide (TiP)/poly(vinyl acetate) (PVAc). Pure titanium dioxide nanofibers were obtained by high temperature calcination of the inorganic-organic composite fibers. SEM, FT-IR, and WAXD techniques were employed to characterize these nanofibers. The titanium dioxide nanostructured fibers have rougher surface and smaller diameter compare with PVAc/TiP composite nanofibers. The anatase to rutile phase transformation occurred when the calcination temperature was increased from $600^{\circ}C$ to $1000^{\circ}C$.