• 한국군사과학기술학회지
• /
• 제12권6호
• /
• pp.776-784
• /
• 2009

The function of DIRCM(Directed Infrared Countermeasures) jamming is to cause the missile to miss its intended target by disturbing the seeker tracking process. The DIRCM jamming uses the pulsing flashes of IR energy and its frequency, phase and intensity have influence on the missile guidance system. In this paper, we analysis the DIRCM jamming effect of spin-scan reticle seeker. Simulation results show that the jamming effect is greatly influenced by frequency, phase and intensity of the jammer signal.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.527-527
• /
• 2013

현재 산업에서 상압플라즈마는 생물의학, 표면처리, 용접 및 절단, 화학적 오염제거 등 여러 분야에서 각광받고 있으며 그 잠재력 또한 매우 크다. 통상적으로 글로우 방전은 생물의학, 표면처리, 화학적 오염제거 등에 주로 쓰이고 아크 방전은 용접 및 절단에 응용된다. 이처럼 상압플라즈마는 여러 가지 방전으로 분류되고 그 특성에 맞게 응용되고 있는데 이러한 산업 여러 분야에 적절히 응용하기 위해서는 이에 대한 진단과 특성 분석이 선행적으로 이루어져야 한다. 본 연구에서는 침 대 면 전극을 가진 상압방전장치에서 스트리머로부터 스파크방전으로의 전이과정이 연구되었다. 전극간격, 주파수, 전압, 구동회로의 전류제한 조건을 가변함에 따라 스파크방전으로 전이되는 방전조건과 안정적인 글로우 방전이 유지되는 조건이 어떻게 달라지는지 조사되었다. 또한 방전전류 측정 및 ICCD 영상분석을 통해 Transient spark의 self-pulsing 조건과 주파수변화 특성을 고찰하였다.

• Journal of Astronomy and Space Sciences
• /
• 제16권2호
• /
• pp.265-272
• /
• 1999

추력기가 비대칭으로 배치된 위성의 궤도조절시 궤도조절용 추력기를 이용하여 궤도조절과 동시에 자세를 제어하는 한 방법으로 제시하였다. 궤도 조절시에는 추력기의 비분사 시간을 조절하여 자세를 제어하며 궤도를 조절하나, 비대칭의 경우는 기존의 대칭 추력기의 분사방법을 쓸 수 없고 비대칭으로 인한 토크외란을 상세시키며 분사해 주어야 한다. 본 논문에서는 영의 해를 이용하여 토크외란 없이 궤도조절과 함께 자세제어하는 방법을 제시하였으며 시뮬레이션 결과 잘 적용됨을 보였다.

• 한국항행학회논문지
• /
• 제16권4호
• /
• pp.627-634
• /
• 2012

이 논문은 의사위성 신호에 대한 GPS 소프트웨어 수신기의 성능을 분석하고자 한다. 의사위성이 계속 켜져있을 경우와 펄싱이 주어졌을 경우에 대해서, 의사위성의 신호세기와 의사위성과 수신기 사이의 거리에 따라 의사위성이 GPS 소프트웨어 수신기에 미치는 영향을 알아본다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1339-1342
• /
• 2005

The development of an accurate and energy saving pneumatic regulator that may be applied to a variety of practical pressure control applications is described in this paper. A novel modified pulse width modulation(MPWM) valve pulsing algorithm allows the pneumatic regulator to become energy saving system. A comparison between the system response of conventional PWM algorithm and that of the modified PWM(MPWM) algorithm shows that the control performance is almost the same, but energy saving is greatly improved by adopting this new MPWM algorithm. The effectiveness of the proposed control algorithm is demonstrated through experiments with various reference trajectories.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.64-70
• /
• 2005

The development of an accurate and energy saving pneumatic regulator that may be applied to a variety of practical pressure control applications is described in this paper. A novel modified pulse width modulation(MPWM) valve pulsing algorithm allows the pneumatic regulator to become energy saying system. A comparison between the system response of conventional PWM algorithm and that of the modified PWM(MPWM) algorithm shows that control performance is almost the same, but energy saving is greatly improved by adopting this new MPWM algorithm. The effectiveness of the proposed control algorithm are demonstrated through experiments with various reference trajectories.

• Journal of Mechanical Science and Technology
• /
• 제19권2호
• /
• pp.529-539
• /
• 2005

The development of a fast, accurate, and inexpensive position-controlled pneumatic actuator that may be applied to various practical positioning applications with various external loads is described in this paper. A novel modified pulse-width modulation (MPWM) valve pulsing algorithm allows on/off solenoid valves to be used in place of costly servo valves. A comparison between the system response of the standard PWM technique and that of the modified PWM technique shows that the performance of the proposed technique was significantly increased. A state-feedback controller with position, velocity and acceleration feedback was successfully implemented as a continuous controller. A switching algorithm for control parameters using a learning vector quantization neural network (LVQNN) has newly proposed, which classifies the external load of the pneumatic actuator. The effectiveness of this proposed control algorithm with smooth switching control has been demonstrated through experiments with various external loads.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1012-1017
• /
• 2003

The development of a fast, accurate, and inexpensive position-controlled pneumatic actuator that may be applied to a variety of practical positioning applications with various external loads is described in this paper. A novel modified pulso width modulation (MPWM) valve pulsing algorithm allows on/off solenoid valves to be used in place of costly servo valves. A comparison between the system response of standard PWM technique and that of the novel modified PWM technique shows that the control performance is significantly increased. A state feedback controller with position, velocity and acceleration feedback is successfully implemented as the continuous controller. Switching algorithm of control parameter using learning vector quantization neural network (LVQNN) is newly proposed. which estimates the external loads of the pneumatic actuator. The effectiveness of the proposed control algorithms are demonstrated through experiments with various loads.

• 한국레이저가공학회지
• /
• 제16권2호
• /
• pp.7-11
• /
• 2013

Recently advanced laser processing is widely introduced to improve the efficiency of micro part production and to reduce the rate of inferior goods. In this paper the trend of delamination of single layer with both thin copper and polyimide according to the variation of copper thickness was investigated using the coupled thermal-structural analysis of ANSYS. From these analyses results, some conclusions were obtained. Firstly, the maximum temperature was increasing with respect to decrease of copper thickness. Secondly the maximum strain which was in general estimation the main effect of the delamination was observed in case of the copper thickness of $5{\mu}m$. Finally the trend of the delamination was decreasing with increasing the thickness of copper layer.

• 한국정밀공학회지
• /
• 제20권8호
• /
• pp.86-93
• /
• 2003

The development of a fast, accurate, and inexpensive position-controlled pneumatic actuator that may be applied to a variety of practical positioning applications with various external loads is described in this paper. A novel modified pulse width modulation (MPWM) valve pulsing algorithm allows on/off solenoid valves to be used in place of costly servo valves. A comparison between the system response of standard PWM technique and that of the novel modified PWM technique shows that the control performance is significantly increased. A state feedback controller with position, velocity and acceleration feedback is successfully implemented as the continuous controller. Switching algorithm of control parameter using learning vector quantization neural network (LVQNN) is newly proposed, which estimates the external loads of the pneumatic actuator. The effectiveness of the proposed control algorithms are demonstrated through experiments with various loads.