• 전자공학회논문지B
• /
• 제31B권7호
• /
• pp.211-218
• /
• 1994

Stochastic computation employs random pulse streams to represent numbers. In this paper, we study a new method to implement the number system which uses the ratio of the numbers of ones and zeros in the pulse streams. In this number system. if P is the probability that a pulse is one in a pulse stream then the number X represented by the pulse stream is defined as P/(1-P). We propose circuits to implement the basic operations such as addition multiplication and sigmoid function with this number system and examine the error characteristics of such operations in stochastic computation. We also propose a neuron model and derive a learning algorithm based on backpropagation for the 3-layered feedforward neural networks. We apply this learning algorithm to a digit recognition problem. To analyze the results, we discuss the errors due to the variance of the random pulse streams and the quantization noise of finite length register.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권5호
• /
• pp.238-244
• /
• 2005

This paper proposes a new configuration of 36-pulse voltage source converter which consists of two 6-pulse bridges and a pulse-interleaving auxiliary circuit. The system topology of proposed converter was derived to increase the pulse number of converter output voltage without increasing the number of 6-pulse bridges. The gate pulse generation was analyzed using the theoretical approach of multi-pulse switching converter, The operational feasibility of proposed system was verified by computer simulations with PSCAD/EMTDC software and experimental works with 2kVA hardware prototype. The proposed converter can be widely used for the uninterruptible power supply, the power quality compensator, and the distributed power generation, such as solar and fuel cell power system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.31-35
• /
• 2004

This paper proposes a new configuration of 36-pulse voltage source converter which consists of two 6-pulse bridges and a pulse-interleaving auxiliary circuit. The system topology of proposed converter was derived to increase the pulse number of converter output voltage without increasing the number of 6-pulse bridges. The gate pulse generation was analyzed using the theoretical approach of multi-pulse switching converter. The operational feasibility of proposed system was verified by computer simulations with PSCAD/TMTDC software and experimental works with 3kVA hardware prototype. The proposed converter can be widely used for the uninterruptible power supply, the power quality compensator, and the distributed power generation, such as solar and fuel fell power system.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권2호
• /
• pp.177-183
• /
• 1999

The major object of this study is to investigate experimentally the experimental equation by the non-destructive testing methods of ultrasonic pulse velocity, rebound number, combined method of ultrasonic pulse velocity and rebound number, maturity which are applicable to the evaluation of compressive strength of concrete at early ages. Also test result of mix are statistically analyzed to infer the correlation coefficient between the maturity and the compressive strength of concrete. The results show good application of Logistic curve for estimating strength development under various curing temperature. The relation between ultrasonic pulse velocity, rebound number, combined method of ultrasonic pulse velocity and rebound number and compressive strength of concrete have low correlation coefficient, but maturity method show good correlation coefficient.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1072-1075
• /
• 2001

$Al_2O_3$ ceramics are generally used as components in processing equipment, devices or machinery because it can perform some functions better than competing metals or polymers. Many of these applications rely on $Al_2O_3$ ceramics special electromagnetic properties, its relative chemical inertness, hardness, strength and its temperature capabilities. But $Al_2O_3$ ceramics are brittle materials, a fact that may cause problems and at the same time be helpful while machining with laser. This study described a basic study of the input parameters effect on the dimension of the microhole at the $Al_2O_3$ ceramics using Excimer laser. In the laser microhole machining of $Al_2O_3$ ceramics, major input parameters are pulse energy, pulse power, pulse frequency and pulse numbers. In conclusion, we can get a smaller microhole and diameter rate by an appropriate pulse energy, pulse frequency and pulse number.

• 콘크리트학회논문집
• /
• 제16권6호
• /
• pp.833-840
• /
• 2004

비파괴 검사에 의한 콘크리트 압축강도 시험법 중에서 반발도법과 초음파 속도법은 가장 널리 사용되는 방법이다. 그러나 국내에서 사용되고 있는 비파괴 강도 시험법은 대부분이 외국의 시험법을 적용하고 있어서 국내의 콘크리트 구조물에 직접 적용하는 데는 무리가 따른다고 할 수 있다. 반발도법의 경우, 일본건축학회 등의 제안에 자라 20개의 타격점을 표준으로 채택하고 있으나 표준편차에 대한 고려를 하지 않고 있는 실정이다. 또한, 초음파 속도법에 의한 시험은 압축강도를 추정하는데 필요한 측정횟수의 규정이 없다 따라서 본 연구에서는 카이검증을 이용하여 비파괴 검사법에 의한 콘크리트 압축강도의 타격횟수의 신뢰도를 검토하고 최소시험 횟수를 제안하였다. 그 결과, 반발도법과 초음파 속도법으로 추정한 콘크리트 압축강도 값이 만족할 만한 신뢰범위에 들기 위한 최소시험횟수는 각각 11회와 7회로 분석되었다. 다만, 실구조물의 품질변동을 고려하여 이상치의 결측처리와 시험군의 격자 배열을 전제로 한다면, 반발도법은 국내의 관행에 따라 20회로, 음파 속도법은 9회로 규정하는 것이 바람직하다고 판단된다.

• 대한한의학원전학회지
• /
• 제20권4호
• /
• pp.17-35
• /
• 2007

Objectives : To consider same or not the positions of acupoints on the meridian in the old acupuncture books. Methods: On the basis of old acu-books, We count the number of acupoints that are on pulse. Thru the three books-"Yijongkumkam(醫宗金鑑)","Chimkuhak 1st(鍼灸學-上)", Kyunghyulhakchongseo(經穴學叢書)"-We Compared the way of positioning of acupoints, also did on the location of acupoints, vein, vascular system, around the acupoints, based on the anatomical structures(esp. artery) Results : On the basis of old acu-books, the number of acupoints(only in the twelve meridian) on the pulse is 35, and the number of points not in the old books but on the pulse is 6, sum is 41 points. Comparion from Sambukuhu consultation method(三部九候診法) in "Somun(素問)", Some points, Taeyang(太陽, not in the twelve meridian), Yimun(耳門) and Koryo(Yimun and Koryo are in) are on pulse. Like Chonbu(天府) and Hyupbaek(俠白), We can feel the pulse on ulna side of biceps muscle, noton radial side. Shikdu(食竇) was described as on pulse in the "Chimkushimbopyokyul(鍼灸心法要訣)", but we could hardly feel it. Conclusions : It'll be right to add the Yimun(耳門) and Koryo to the points on pulse, of course two points are not in the twelve meridian. We must take the points Chonbu(天府) and Hyupbaek(俠白), on ulna side of biceps muscle. Shikdu(食竇) must be excepted, because we cannot feel the pulse in consultation.

• 한국안전학회지
• /
• 제32권4호
• /
• pp.53-58
• /
• 2017

The rebound hammer test and the measurement of ultrasonic pulse velocity(UPV) have been widely used for the physical properties & condition evaluation of reinforced & prestressed concrete structures for a long time, but the acoustoelastic effects by the prestressing in the prestressed concrete structures on the rebound number and ultrasonic pulse velocity have not been studied clearly. Therefore, this study investigated the data distribution of the rebound numbers and ultrasonic pulse velocities in reinforced and prestressed concrete slabs of $3000{\times}3000mm$ with a thickness of 250 mm. Also, the Kolmogorov-Smirnov goodness-of-fit test was done in order to identify statistical consistency and reliability. The statistical analysis results show that the rebound number and ultrasonic pulse velocities increased about 1.9% and 2.5%, respectively when prestressing was applied. As expected, the UPV shows better statistical reliability and potential for in situ evaluation than the RB because the RB are more sensitive to testing posture, surface condition, temperature and humidity so on. The experimental data in this study can be used for the condition assessment of reinforced and prestressed concrete structures by the rebound number and ultrasonic pulse velocity.

• 한국환경과학회지
• /
• 제20권1호
• /
• pp.25-34
• /
• 2011

The new empirical static model was constructed on the basis of dimension analysis to predict the pressure drop according to the operating conditions. The empirical static model consists of the initial pressure drop term (${\Delta}P_{initial}$) and the dust mass number term($N_{dust}=\frac{{\omega}_0{\nu}_f}{P_{pulse}t}$), and two parameters (dust deposit resistance and exponent of dust mass number) have been estimated from experimental data. The optimum injection distance was identified in the 64 experimental data at the fixed filtration velocity and pulse pressure. The dust deposit resistance ($K_d$), one of the empirical static model parameters got the minimum value at d=0.11m, at which the total pressure drop was minimized. The exponent of dust mass number was interpreted as the elasticity of pressure drop to the dust mass number. The elasticity of the unimodal behavior had also a maximum value at d=0.11m, at which the pressure drop increased most rapidly with the dust mass number. Additionally, the correlation coefficient for the new empirical static model was 0.914.

• 한국수정란이식학회지
• /
• 제14권2호
• /
• pp.107-111
• /
• 1999

The present study was performed to evaluate the best electric fusion condition in nuclear transfer, Korean Native Cattle fibroblasts were used as nucleic donors. Oocytes from slaughterhouse were matured in vitro for 22 h and enucleated. Each individual cells were transferred into enucleated ocytes and reconstructed embryo were placed into the fusion chamber. In experiment 1, pulse were performed by altering pulse duration at 1. 75kv/cm, 1 time. When pulse duration is 30$mutextrm{s}$, fusion and development rates is higher than other conditions. In experiment 2, the effect of different pulse number were studied at the pulse duration 30$mutextrm{s}$ and the same pulse intensity. When pulse number was one, fusion rates were higher than other conditions. The fused embryos were moved to culture medium and assessed their development to blastocyst. These results showed that best fusion condition was 30$mutextrm{s}$ and one time. And the fibroblasts derived from Han Woo can be reprogrammed by nuclear transplantation and develop subsequently in vitro.