• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.384-388
• /
• 2003

In this paper, we have proposed a OFDM/QPSK-DMR(Orthogonal frequency Division Multiplexing/Quadrature Phase Shift Keying Modulation-Digital Microwave Radio)system using BL-PSF(Band-limited pulse shaping filter) over the Microwave channel. In the proposed DMR system, STS-1(51.84 Mbps) of SONET(Synchronous Optical NETwork) is first modulated by OFDM/QPSK symbol and used Band-limited pulse shaping filter. The advantage of the proposed DMR system is to simplify system complexity and increase IFFT/FFT block use-efficiency. The system performance of single carrier and OFDM systems is already proved that those of DMR systems have the same performance over AWGN(Additive White Gaussian Noise) channel environment. Therefore, the system is analyzed between proposed OFDM/QPSK-DMR and single carrier DMR systems and simulated by BER performance and Signature curve over Microwave channel environment. Simulation result is that the proposed system performances are approaching to the performance of single carrier DMR system as the number of Sub-carriers increasing.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.2
• /
• pp.130-135
• /
• 2009

In this paper, an efficient pulse-shaping filter structure for high-density and low-power electronic devices is proposed. The proposed structure is based on polyphase decomposition property and look-up table method. By Synopsys CAD simulations, it is shown that the use of the proposed method can result in reduction in the number of gates by 54% and can reduce power consumption by 9%.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.337-340
• /
• 2002

In data transmission at the digital satellite broadcasting systems, the delay and spread are caused whit receiving original signals from the transmitter in the receiver. So, there are some problems in data fast transmission. Also, transmitted signals ate received in stale of the combination of transmission delay and noise of channel. The affect of channel noise is reduced when increasing transmission power, but as signal interference due to the transmission delay and spread of channel increase in proportion to the transmission power, there is a problem in spite of increasing the transmission power. And there is the problem to add ISI(inter symbol interference) because the property of the channel is limo-varying due to relative moving in the transceiver Therefore, in this paper, a pulse shaping filter for the high-speed service in digital satellite broadcasting systems was designed and reduced the ISI.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1815-1818
• /
• 2002

In this paper, a predistorter is presented for the orthogonal frequency division multiplxing (OFDM) systems with a transmit raised cosine (RC) pulse shaping filter and a high power amplifier (HPA). By exploiting zero-intersymbol interference (ISI) nature of the RC filter, the proposed predistorter placed before the filter only utilizes memoryless nonlinearity of the HPA, not the overall nonlinearity with memory induced by a combination of the filter and HPA. The predistirtion is realized upon fixed point iteration on OFDM symbols. Simulation results show that the proposed predisorter can be effectively employed to achieve significant performance improvement.

• Journal of Broadcast Engineering
• /
• v.11 no.2 s.31
• /
• pp.229-241
• /
• 2006

In this paper we propose and analyze a novel modulation and pre-equalization method to minimize signal processing time delay for the Equalization Digital On-Channel Repeater (EDOCR) in ATSC (Advanced Television Systems Committee) terrestrial digital TV system. The proposed modulation method uses Equi-Ripple (ER) filter coefficients instead of conventional Square Root Raised Cosine (SRRC) after coefficients for VSB (Vestigial Side Bands) pulse shaping. And the proposed pre-equalization method calculates pre-equalizer filter coefficients by using baseband signal as reference signal and demodulated repeater output signal, then generates a new VSB pulse shaping filter coefficients by convolutioning ER filter coefficients and pre-equalizer filter coefficients. The newly generated pulse shaping filter does not have minimized time delay by adjusting the number of pre-taps of the filter, but also compensates linear distortions caused by ER filter and mask filter.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.403-406
• /
• 2003

In this paper, we have proposed a carrier recovery algorithm of OFDM/QPSK-DMR(Orthogonal Frequency Division Multiplexing/Quadrature Phase Shift Keying Modulation-Digital Microwave Radio)system using BL-PSF(Band Limited-Pulse Shaping Filter) and have analyzed the carrier phase MSE(Mean Square Error) performance of OFDM/QPSK and single carrier DMR systems. The existing OFDM/QPSK-DMR system using windowing requires training sequence or CP(Cyclic prefix) to synchronize a receive. carrier frequency. Because in the OFDM/QPSK-DMR system using BL-PSF there is no training sequence or CP(Cyclic Prefix), we also propose a carrier recovery useful to the system. The simulation results confirm that the proposed carrier recovery algorithm has the same carrier phase MSE(Mean Square Error) performance for the single carrier DMR system under AWGN(Additive White Gaussian Noise) environment.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.394-397
• /
• 2003

In this paper, we have proposed a clock recovery algorithm of OFDM/QPSK-DMR(Orthogonal Frequency Division Multiplexing/Quadrature Phase Shift Keying Modulation-Digital Microwave Radio)system using BL-PSF(Band Limited-Pulse Shaping Filter) and have analyzed the clock phase error variance performance of OFDM/QPSK and single carrier DMR systems. The existing OFDM/QPSK-DMR system using the windowing requires training sequence or CP(Cyclic Prefix) to synchronize a receiver clock frequency Because there is no training sequence or CP(Cyclic prefix) in our proposed DMR system, the proposed clock recovery algorithm is useful to the OFDM/QPSK-DMR system using BL-PSF, The simulation results confirm that the proposed clock recovery algorithm has the same clock phase error variance performance in a single carrier DMR system under AWGN(Additive White Gaussian Noise) environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.105-113
• /
• 2000

This paper proposes the optimal design method of PSF(pulse shaping filter) with fixed-point coefficients, often used in digital communication system. Though RCF (Raised Cosine Filter) and Root-Squared RCF have less attenuation in stopband and are designed with floating point coefficients, those are selected by the reason that the design is simple. In this paper, 1 introduce the optimal design method for fixed point PSF including Root Squared type by using mixed integer linear programming. Through some design examples, it is shown that the proposed method better performs in ISI and requires less complexity. The complexity of the proposed filter is reduced to 20% as compared to conventional RCF and Root Squared RCF. For IS-95, that is the standard of CDMA system, the proposed filter reduces ISI up to 75% compared to the standard transmission filter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.624-632
• /
• 1994

In this paper, we implement modulator of 155Mbps 64QAM RF MODEM, CCITT G. 707 SDH(Synchronous Digital Hierachy) 1 level, for DMR(DIgital Microwave Radio) STM-1 transmission, PSF(Pulse Shaping Filter) plays an important role to analyze modulator. We use 7 orders elliptic filter instead of Chebychev filter(roll-off facter a=0.5)in this paper. we obtain that roll-off factor, a is 0.33, group delay is less than 10nsec using this filter. Also we get -20dBm output level after passing the PSF, and 0dBm output level after passing the IF amplifier.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2427-2430
• /
• 2003

A uniformly sampled digital pulse-width modulation adopting a pre-compensation filter scheme for applications in high-resolution digital-to-analog data conversion is described. It is shown that linearization of the intrinsic distortion resulting in uniformly sampled pulse-width modulation can be achieved by using a non-integer delay digital filter embedded within a noise shaping re-quantizer.