• 제목/요약/키워드: pulping property

검색결과 15건 처리시간 0.023초

왕겨섬유 활용을 위한 왕겨 펄프화 연구 (Study of Rice Husk Pulping for utilization of Rice Husk Fiber)

  • 오민택;성용주
    • 펄프종이기술
    • /
    • 제44권3호
    • /
    • pp.63-69
    • /
    • 2012
  • The rice husk is one of the major agricultural residue in KOREA. In this paper, the effects of various pulping conditions on the properties of rice husk pulp and handsheets made of rice husk fiber were evaluated in order to utilize the rice husk as an alternative source for wood pulp. Two typical alkali pulping, such as soda pulping and Kraft pulping were applied with various conditions of the pulping processes. The higher effective alkali and higher pulping temperature resulted in the higher efficiency in removal of lignin and ash, which leaded to the higher strength properties of handsheets made of rice husk fiber, but the lower yield of rice husk pulp. The better efficiency in production of rice husk pulp and the stronger handsheets were obtained by the Kraft pulping.

부들의 전처리를 통한 당의 추출과 소다펄프화에 관한 연구 (2) 펄프화 특성 (Sugar Extraction by Pretreatment and Soda Pulping from Cattail (Typhaceae) (2) Pulping Characteristics)

  • 김완중;이성은;서영범
    • 펄프종이기술
    • /
    • 제42권3호
    • /
    • pp.14-21
    • /
    • 2010
  • Three different species of cattails (Typha orientalis, Typha angustata, Typha latifolia) cultivated in South Korea were examined as raw materials for the production of pulp and paper. Soda pulping with anthraquinone was used for the stems and the leaves of cattail, separately. Addition of anthraquinone in soda pulping improved the yield greatly. Chemical components between three cattail species and within each species (leaves and stem) gave little differences. Average fiber length of the bleached cattail fibers was a little shorter than that of the HwBKP of Eucalyptus. Average fiber width of the cattail fibers was a half of that of the HwBKP. Compared to the HwBKP, cattail pulp gave higher breaking length, higher opacity, and better smoothness at equivalent freeness.

뽕나무자원의 새로운 한지제조 특성 (A New Hanji Manufacturing from Morus Resources)

  • 이일로;최태호;조남석
    • 펄프종이기술
    • /
    • 제38권3호
    • /
    • pp.38-46
    • /
    • 2006
  • This study was carried out to investigate the sheet properties of Morus Hanji, made by different pulping methods, such as alkali, alkali-peroxide and sulfomethylated pulping, and different stocks composed to bast and whole stalk fibers. Two species of Morus, M. alba and M. lhou, were used. Pulp yield of the whole stalk parts, its brightness and opacity were higher than those of bast part. In particular sulfomethylated pulp has higher brightness of $62{\sim}63%$, than other pulps(average brightness $30{\sim}40%$). In mechanical properties, paper made of bast fiber has higher strength than those of the whole stalks. Hanji made from M. lhou, whole stalk, and sulfomethylated pulp gave better sheet formation and higher strength than those of the others. Hanji from M. alba bast fiber and whole stalk pulps were not so good sheet properties.

강도 개선을 위한 분급된 OCC펄프의 고농도 펄핑 처리 기술 (High Consistency Pulping Treatment of Fractionated OCC Pulp for Improving Strength)

  • 허용대;이상길;이학래;윤혜정
    • 펄프종이기술
    • /
    • 제37권4호통권112호
    • /
    • pp.18-25
    • /
    • 2005
  • The mechanical strength is the prime requisite for linerboard and corrugating mediums. Repeatedly recycled OCC fibers show less suitable property for papermaking mostly due to hornification and reduced fiber length. To overcome these problems many researches including fractionation, enzymatic treatment, and chemical or mechanical treatments of fibers have been carried out. In this study, the effect of mechanical treatment by high consistency pulping on the characteristics of recycled fibers as well as mechanical properties of sheets were investigated. Results on the strength properties of handsheets made of recycled fibers that were treated to same freeness level by beating and high consistency pulping, respectively, showed that beating treatment was more efficient in improving strength. Drainage and recycling potential of the fibers treated by high consistency pulping, however, were expected to be superior to beating because fines content and fiber length didn't change significantly.

Effect of Tree Age and Active Alkali on Kraft Pulping of White Jabon

  • Wistara, Nyoman J.;Carolina, Anne;Pulungan, Widya S.;Emil, Nadrah;Lee, Seung-Hwan;Kim, Nam-Hun
    • Journal of the Korean Wood Science and Technology
    • /
    • 제43권5호
    • /
    • pp.566-577
    • /
    • 2015
  • White Jabon (Anthocephalus cadamba Miq.) is one of the fast growing species in Indonesia and has the potential as the raw material for pulp and paper. In this research, 3, 5, and 7 years old White Jabon woods were pulped under different active alkali charge of 15%, 18%, 21%, 24%, and 27%, and its effect on delignification degree, kappa number, pulp yield, pulp viscosity, brightness, unbeaten freeness, and delignification selectivity was investigated. The results showed that tree age and active alkali concentration influenced the quality of pulp and pulping properties, except for that of unbeaten freeness. Delignification degree increased with increasing active alkali charge, and this brought about the decrease of pulp kappa number. The pulping yield tended to decrease below the Klason lignin of approximately 4%. Even though the 3 years old wood resulted in the highest brightness and highest delignification selectivity, the highest pulp viscosity was obtained with the 5 years old wood. The dominant fiber length of all wood ages was in the range of 1.2 - 2.0 mm. The 3 years old wood was considered to be the most promising raw material for kraft pulping in the view point of pulping properties, pulp quality and harvesting rotation.

뽕나무 한지의 지합특성 (Sheet Formation Properties of Morus Hanji)

  • 이일로;조남석
    • 펄프종이기술
    • /
    • 제38권3호
    • /
    • pp.47-60
    • /
    • 2006
  • This study was carried out to investigate the sheet formation properties of Morus Hanjis, made of bast and whole stalk pulps by different pulping methods, such as alkali, alkali-peroxide and sulfomethylated pulping. Two species of Morus, M. alba and M. lhou, were used. Effect of morphological properties of pulp stocks on the sheet formation and its gray levels based on optical property were evaluated using an Image analyzer. In addition, the effect of fiber distribution index(FDI) which was calculated from tile data of Confocal laser scanning microscopy(CLSM) on the sheet formation and optical properties of Morus Hanji were also discussed. On the sheet formation, Hanji from whole stalk pulp was superior than that of bast pulp. The more the sheet formation improved, the more paper opacity decreased. In the aspect of Hanji's surface characteristics analyzed by an Image analyzer, the average gray level and its standard deviation of Hanji from the whole stalk pulp were rather lower than those of bast pulp because of better sheet formation of the former. However, high brightness Hanji showed high value of gray level. The sheet formation and paper opacity were increased with the decrease of standard deviation of gray level. From these results, gray level measurement could be used to predict the paper opacity as well as sheet formation. Sheet formation of whole stalk Hanji and its FDI measured by CLSM were higher than those of bast fibers. In conclusion, the sheet formation and opacity of Hanji could be evaluated by standard deviation value of Hanji's gray level using an Image analyzer and by fiber distribution index using CLSM.

백색부후균 생물 전처리에 의한 Kraft Pulp화 특성 (Kraft Pulping Characteristics by Bio-pretreatment with White-rot Fungus)

  • 강규영;조병묵;오정수
    • Journal of the Korean Wood Science and Technology
    • /
    • 제29권4호
    • /
    • pp.103-110
    • /
    • 2001
  • 목재 내 리그닌의 선택적 분해 특성을 지닌 백색부후균 중, Phanerochaete chrysosporium KCCM 34740 균주를 현사시나무 목재 칩에 전처리하여 bio-kraft pulping 적용 가능성을 실험적으로 평가하였다. 전처리 결과, 무처리 대조구에 비해 펄프의 정선수율은 전처리 10일에서 최고 약 2%의 증가를 보였으며, 전처리 기간의 증가에 따라 여수도의 감소, WRV의 증가 경향을 나타냈다. 또한 수초지의 물성 개선에도 효과가 있었으며, 주사전자현미경 관찰을 통하여 이러한 효과가 백색부후균의 생물고해 작용, 즉 펄프 섬유의 미세섬유화 및 다공질화에 기인한 것임을 확인할 수 있었다. 이러한 결과로써 향후 kraft 증해 약액 및 제지공정상의 고해 동력에너지의 소비를 절감할 수 있을 것으로 기대한다.

  • PDF

오일 팜 수간 유래 CNF (cellulose nanofibrils)의 화장품 보습제 적용을 위한 보습력 평가 (Evaluation of water holding property for applying a cosmetic moisturizer from oil palm trunk CNF)

  • 송우용;신수정
    • 펄프종이기술
    • /
    • 제48권2호
    • /
    • pp.91-98
    • /
    • 2016
  • Cellulose nanofibrils (CNF) was made from oil palm trunk (OPT) with soda-anthraquinone pulping, chlorine dioxide bleaching, carboxymethylation, followed by mechanical grinding. Size of this CNF was 16-40 nm of width confirmed by TEM. To evaluate CNF from OPT as cosmetics raw materials for moisturizing component, water holding properties was compared with hyaluronic acid and collagen. CNF from OPT had better water holding property than collagen or hyaluronic acid whether phenoxyethanol was added as antiseptic or without additive.

방습 효과가 우수한 환경친화적 방습지(제1보) -방습제의 특성- (Environmentally Friendly Moisture-proof Paper with Superior Moisture Proof Property (I) -Properties of Moisture Proof Chemicals-)

  • 유재국;조욱기;이명구
    • 펄프종이기술
    • /
    • 제33권4호
    • /
    • pp.15-20
    • /
    • 2001
  • The function of the moisture-proof paper is to prevent moisture from adsorbing into the packed goods. Water-vapor transmission rate of the moisture-proof paper should be less than 100g/$m^2$.24hr and the optimum rate would be less than 50g/$m^2$.24hr. In general the moisture-proof paper has been made by laminating polyethylene or polypropylene on top of the base paper. However this kind of moisture-proof paper has a problem in recycling so that it brings about environmental pollution. In general the moisture-proof paper has been made by laminating polyethylene or polypropylene on top of the base paper. However this kind of moisture-proof paper has a problem in recycling so that it brings about environmental pollution. The purpose of this paper was to make moisture-proof paper using the mixture of SB latex and wax emulsion which was recyclable and environmentally friendly. Water vapor transmission rate showed less than 50g/$m^2$.24hr in mixture ratio of 85:15, 87:13, 90:10. Especially the mixture ratio of 87:13 showed the most favorable water-vapor transmission rate. However, the moisture-proof layer was destroyed slightly by folding in packing. It has been observed that there was no close relationship between water-vapor transmission rate of the moisture-proof paper and grammage of the base paper, but the density of base paper had influenced on water vapor transmission rate. It was also observed that the moisture-proof paper could be recycled. The moisture-proof paper was similar to base paper in degree of the pulping, and there was no significant difference in dispersion between moisture-proof paper and base paper. Most of wax particles which caused the spots during drying process could be removed by flotation process. Tensile strength and tear strength of both moisture-proof paper and base paper after pulping were measured to examine the fiber bonding, and no significant difference in physical properties was observed.

  • PDF

아세트산(酸)-물 용매계(溶媒系)에 의한 목재(木材)의 유기산(有機酸) 증해효과(蒸解效果) (Effects of Aectic Acid-Water Solvents on the Organic Acid pulping of Wood)

  • 이선호;조병묵
    • Journal of Forest and Environmental Science
    • /
    • 제9권1호
    • /
    • pp.67-80
    • /
    • 1993
  • 무공해 대체 펄프화법 개발의 일환으로 비교척 최근에 많은 연구가 이루어지고 있는 아세트산-물 용매 증해법을 이용하여 현사시나무와 소나무률 펄프화 하였다. 펄프 특성의 변화에서 현사시나무는 거의 모든 아세트산 충해초건에서 우수한 펄프화 경향을 보였지만 소나무는 저온에서 충해가 거의 일어나지 않았다. 현사시나무의 최적 중해조건은 중해농도 95%, 중해온도 $185^{\circ}C$, 증해시간 0.5hr이었다. 구성당 성분의 거동은 현사시나무와 소나무에서 glucose만이 소량 감소하는 반면 그외의 당성분들은 다량 용출되었다. 폐액중의 용출 아세트산 리그닌에 대한 기초척인 성질을 살펴본 결과 현사시나무의 아세트산 리그닌의 원소조성은 C가 63.88%, H가 5.45%, O가 30.67%이며 $C_9$의 formular는 $C_9H_{9.15}O_{3.24}$였고 소나무의 아세트산 리그닌의 조성온 C가 61.85%, H가 6.14%, O가 32.01% 이며 $C_9$의 formular는 $C_9H_{9.15}O_{3.50}$이었으며 두 수종의 아세트산 리그닌 중합 명균분자량은 현사시나무가 731이며 소나무는 725였다.

  • PDF