• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.27-35
• /
• 2008

In order to determine the most appropriate recycling line to treat old corrugated container (OCC) to substitute unbleached kraft pulp (UKP) for the manufacture of kraft paper, three recycling lines were evaluated in pilot scale tests. The recycling line consisting of kneading, flotation, washing, dispersion and screening steps was able to produce pulp with acceptable appearance. Kneading was shown to be more efficient treatment to reduce specks than dispersion. In addition, 0.2 mm slot screen was very effective to remove specks. Severe damages on fiber morphology such as shortening of fiber and formation of fines were not observed during mechanical treatments such as kneading and dispersion. Most of strength properties of the kraft paper produced with the recycled pulp were found to be slightly increased after treated in the recycling lines.

• The Korean Journal of Food And Nutrition
• /
• v.6 no.4
• /
• pp.281-286
• /
• 1993

Strawberry pulp was separated into serum and Insoluble pulp by centrifugation. The serum was concentrated in vacuo at 55~58$^{\circ}C$ and 10% aroma recovered. Two folds concentrated strawberry pulp was prepared by mixing concentrated serum, aroma fraction and Insoluble pulp. To develop aroma-rich jam, the strawberry jam was prepared by filling mixture of concentrated pulp, sucrose, citric acid and pectin into retortable pouches and by heating them after heat-seating. The color and flavor quality of the jam prepared by new method were better than the jam prepared by conventional method, as Indicated by GC, GC/MS data, surface color and anthocyanin contents. These results were confirmed by the sensory evaluations. Flavor off-flavor, color intensity and overall acceptance were superior to the conventional method.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.4
• /
• pp.22-29
• /
• 2002

This research was conducted to investigate the morphological characteristics of fine fibers produced during beating process of high yield pulp treated with ozone and the distribution of lignin in the produced fine fibers. Thermomechanical(TMP) pulp and chemithermomechanical(CTMP) pulp of spruce and CTMP of white birch were beaten to reach 200$m\ell$ CSF, and then the fine fibers were observed using ultraviolet microscope. The fine fibers produced from TMP and CTMP of spruce using treated with ozone for 15 minutes were fragments of fiber surfaces or cell corners, and most of them contained lignin. However, lignin was not observed in the fibers after 15 minutes of ozone treatment. The fine fibers produced from CTMP of white birch were broken pieces or fragments of fiber surfaces or cell corners. The lignin was observed in the fibers until 5min of ozone treatment but no lignin was observed after 5 minutes of ozone treatment. Different morphological characteristics of TMP and CTMP explained both the different morphological characteristics and the distribution of lignin observed in the fine fibers produced from the beating process of TMP and CTMP treated with ozone.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.1
• /
• pp.111-118
• /
• 2016

The effects of pulp beating degree and bulky promotor concentration on the properties of handsheet including a bulk and strength have been investigated during manufacturing of low density paper (high bulk paper) with cationic fatty acid bulky promotor. It was found that paper bulk increased with increasing cationic fatty acid bulky agent concentration, while tensile strength decreased. On the other hand the opacity of handseets also increased with increasing cationic fatty acid bulky agent concentration, while brightness decreased slightly. With increasing pulp beating degree, paper bulk as well as tensile strength increased, while opacity decreased. Brightness did not show a significant difference with increasing pulp beating degree. The highest bulk and strength values were observed when 1.5% (SwBKP) and 2% (HwBKP) of bulky promotor was treated into the 450 mL CSF pulp slurry.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.4
• /
• pp.71-77
• /
• 2010

To utilize modified pulp fibers in papermaking system, it is necessary to evaluate the interaction between modified fibers and papermaking additives. Fluorescent whitening agent (FWA) is an important additive which has been widely used for production of writing and printing paper. We modified pulp fiber surface by Layer-by-Layer multilayering of polyelectrolytes, and investigated the interaction between these fibers and FWA used in internal addition or surface treatment. Pulp fiber with cationic surface charge showed a good affinity to internal FWA. For FWA in surface sizing agent, whiteness and brightness of paper was dependent on pickup weight and polyelectrolyte type. Pulp fibers with C-starch/PSS multilayer showed better optical properties than poly-DADMAC/PSS treatment. It indicated that polyelectrolyte type in Layer-by-Layer multilayering as well as a good affinity to FWA is important to get better whiteness and brightness.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.4
• /
• pp.65-72
• /
• 1992

Steam defiberated pulp and steam exploded wood(birch chip) were extracted with solvents (hot-water, 1% NaOH, MeOH, hot water, 1% NaOH). The properties of residual fiber were examined for the utilization as ruminants feed. The digestibility is 38% in steam defiberated pulp(10kg /$cm^2$-15min) and 62-77% in exploded wood(17-18kg/$cm^2$-2~10min), respectively. The more steam pressure and time increase, the more the digestibility increase. The sugars obtained from extractives is amount from 7% to 13% in asplund pulp and from 7% to 10% in exploded pulp. The sugars was mainly composed of 70-80% xylose. The digestibility of residual fiber which is extracted with solvents is low than these of original fibers. Considering the yield and digestibility as ruminant feed, exploded pulp under 17kg /$cm^2$ for 10min has the best efficiency. The exploded wood gives 75.3% on yield(O. D. chip) and 48% on the digestibility.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.1
• /
• pp.65-73
• /
• 2012

Nowadays, the concern on the environmental load of bleaching process gave rise to the process of ECF(elemental chlorine free) and TCF(total clorine free). These sequences are based on oxygen-derived compounds such as oxygen, ozone, and hydrogen peroxide which is used as a typical eco-friendly bleaching agent. In this study, paper mulberry pulp was bleached with hydrogen peroxide and some bleaching process were accompanied with ultrasonication in order to increase the bleaching efficiency. The best bleaching efficiency of paper mulberry pulp was obtained in the condition of hydrogen peroxide and ultrasonication(20 kHz) bleaching system at $45^{\circ}C$ for 30 min. The brightness and kappa number of paper mulberry pulp were gained to 5.09% and 3.52 respectively. and yield was slightly loosed to 2%. Therefore, the efficiency of hydrogen peroxide and ultrasonication bleaching system of paper mulberry pulp was superior to the conventional hydrogen peroxide bleaching system. Magnesium sulfate acted as a bleaching stabilizer for the increasement of yield. As a result, the yield and viscosity were increased to 2.2% and 12% respectively.

• Food Science and Biotechnology
• /
• v.17 no.4
• /
• pp.734-738
• /
• 2008

The physicochemical and in vitro physiological properties of soluble dietary fiber (SDF) from wax gourd (Benincasa hispida) pulp and peel were investigated. The pulp was composed of 11.4% SDF and 24.3% insoluble dietary fiber (IDF), while the peel contained 3.2% SDF and 43.3% IDE The predominant sugar in the SDF of the wax gourd pulp and peel was uronic acid, followed by galactose and rhamnose. The SDFs from the wax gourd pulp and peel gave similar elution patterns, with 4 main neutral sugar and uronic acid peaks eluted by 0.4, 0.5, 1, and 2 M ammonium acetate buffer. The pulp SDF had a much higher glucose retardation index (GRI) than the peel SDF for all measurement times. The pulp SDF showed strong growth-inhibiting activity against Escherichia coli and Clostridium perfringens, whereas the peel SDF produced strong growth-promoting activity against Bifidobacterium longum, Bifidobacterium infantis, and Lactobacillus brevis when compared to glucose.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2002.11a
• /
• pp.187-188
• /
• 2002

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2004.04a
• /
• pp.25-29
• /
• 2004