• Resources Recycling
• /
• v.21 no.4
• /
• pp.44-52
• /
• 2012

The purpose of this study is to confirm the possibility of obtaining high grade coal from fixed carbon 20.68% coal. Also, the mineralogical, physical/chemical and liberation characteristics was found with the aim of decrease in ash amount, during the pre-processing of clean coal technology. In this study, batch flotation and microbubble column flotation that was appropriate for the processing of fine particles was used with the variation in kinds and quantity of frother, collector and depressant. Also grinding time, air flow rate and feeding rates were examined. As a result of batch flotation, using pulp density 20%, collector DMU-101+dodecyl amine(100 mL/ton), frother pine oil (200 mL/ton), depressant sodium silicate(1 kg/ton), obtained the result of ash rejection 81.55% and combustible recovery 70.23%. In result of microbubble column flotation, the result was ash rejection 83.85% and combustible recovery 70.42% under the condition of pulp density 5%, grinding time 5 min. collector DMU-101+DDA(100 mL/ton), frother AF65(5.4 L/ton), depressant SMP(3.5 kg/ton), wash water(360 mL/min.) and air flow rate(1,197 mL/min.).

• Korean Journal of Food Science and Technology
• /
• v.38 no.2
• /
• pp.273-278
• /
• 2006

Effects of dietary fat and tomato on immune functions were investigated using BALB/c mice. Sixty male BALB/c mice weighing 16-17g were divided into two dietary groups. Control group was fed experimental chow (AIN-76 purified diet) supplemented with saturated fat (beef tallow) and unsaturated fat (safflower oil) at 5% level (weight basis), while treatment group was fed chow added with 0.5% (dry matter basis) of tomato (moisture content 95%) for 10 weeks. Organ weights, delayed-type hypersensitivity test, plaque-forming cell test, agglutination test, differential white cell count, and histological examination were performed at 4th, 7th, and 10th week after dietary treatment. Weight of spleen and spleen index of tomato group increased with increasing experimental period. Thymus index of tomato group was significantly higher than that of control group at 7 and 10 weeks (p<0.05). In delayed hypersensitivity test at 4th, 7th, and 10th week after dietary treatment, tomato group showed more significant increase in footpad swelling reaction 24 hr after challenge than control group (p<0.05). In plaque-forming cell test, tomato group fed 7 weeks increased more significantly than control group, while no significant difference was found between two groups at 10 weeks. Agglutination test decreased with increasing experimental period; tomato group at 10 weeks was higher than control group in antibody response to SRBC. In tomato group, Iympocyte percentage was slightly higher than that of control group, and spleen tissue showed active immune reaction caused by severe proliferation of white pulp.

• Journal of Mushroom
• /
• v.3 no.3
• /
• pp.105-108
• /
• 2005

Main materials used as media for oyster mushroom cultivation are pine sawdust, beet pulp, cotton seed pomace. Increases in the price and the unbalance of demand and supply of cotton seed pomace was often damage to oyster mushroom cultivation farm, so we investigated agricultural by-product to replace the cotton seed pomace for bottle cultivation of oyster mushroom. Treatment of coconut oil meal or coconut pomace delayed incubation period about 3 days compared with cotton seed waste treatment(control), but yield and income index showed similar to each other in three treatment. Consequently coconut oil meal and coconut pomace could select for cotton seed pomace substitute.

• Food Science and Preservation
• /
• v.14 no.4
• /
• pp.351-355
• /
• 2007

Solvent-extracted volatile components from dry powder prepared from Citrus unshiu products such as immature Citrus unshiu (PCU), mature Citrus unshiu (MCU), Citrus unshiu peel (CUP), and citrus juice processing wastes (CJPW), were examined. Also, solvent-extracted volatile components from mushroom mycelia of Pycnoporus coccineus (PC), Lentinus edodes (LE), Pleurotus eryngii (PE), Hericium coralloides (HC), Panellus serotinus (PS), and Ganoderma lucidum(GL), all cultivated using citrus pulp solid media, were assayed. Twenty-nine volatile components were identified in dry powder prepared Citrus unshiu and 18 volatile components were characterized from mushroom mycelia. Of these, ${\beta}-elemene$, germacrene-D, and ${\delta}-cadinene$, were derived from CJPW, but caryophyllene, hexadecanoic acid, decanoic acid, and tetradecanoic acid were synthesized by mushroom mycelia.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.3
• /
• pp.455-459
• /
• 1992

Five type of formulated diet from agricultural by-products (ABP) were fed to four breedtype of cattle in feedlot. The ABP used are palm kernel cake (PKC), palm press fibre (PPF), palm oil mill effluent (POME), cocoa pod (COP), coffee pulp (COF) and pineapple waste (PAP). The formulated diets are PS (52% PKC, 15% PPF and 30% POME), PF (57% PKC, 20% PPF and 20% POME), PA (2% PKC and 55% PAP), CO (42% PKC and 55% COP) and CF (67% PKC and 30% COF) with 1% urea, 1% NaCl and 1% vitamins premix. The cattle breedtypes are Kedah-Kelantan (KK), Brahman-KK (BK), Hereford-KK (HK) and Sahiwal-Friesian (SF). The result showed that breedtype significantly affect all the carcass characteristic except dressing percentage. Each breedtype has it's specific carcass characteristics. HK cattle gave high marbling, BK has high % of carcass bone, KK has high % of carcass meat and low % of carcass fat (lean meat type) and SF has high % of carcass fat. Diet-type significantly affect the deposition of fat in the carcass. High moisture diets (PA and CO) produced significantly higher % carcass bone, the lowest % carcass fat and the highest % carcass meat (65.3%). PF, CF, PA and CO diets produced 63.4%, 59.9%, 55.3% and 54.1% carcass meat respectively.

• Resources Recycling
• /
• v.4 no.3
• /
• pp.19-25
• /
• 1995

A Study on the recovery of the valuable metals(Vanadium Molybdenium) was carried out using spent catalysts originated from desulfurizing process of oil refinery. Experiments consisted of pre-roasting for Sulfur and Carbon removal, soda roasting and leaching for the extraction of valuable metals, and selective precipitation of Vanadium and Molybdenium. Effects of temperature and time in roasting for Sulfur removal, of $Na_2CO_3$ concentrations in soda roasting, and of pulp density, temperature and time in leaching were investigated for the recovery of Vanadium and Molybdenium. A optimum condition having over 85% in yield of Vanadium and Molybdenium was found. In the selective precipitation, more than 98% of Vanadium and Molybdenium were obtained by the variation of pH and concentration of additives.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.34-45
• /
• 2016

Global warming and climate change have been caused by combustion of fossil fuels. The greenhouse gases contributed to the rise of temperature between $0.6^{\circ}C$ and $0.9^{\circ}C$ over the past century. Presently, fossil fuels account for about 88% of the commercial energy sources used. In developing countries, fossil fuels are a very attractive energy source because they are available and relatively inexpensive. The environmental problems with fossil fuels have been aggravating stress from already existing factors including acid deposition, urban air pollution, and climate change. In order to control greenhouse gas emissions, particularly CO2, fossil fuels must be replaced by eco-friendly fuels such as biomass. The use of renewable energy sources is becoming increasingly necessary. The biomass resources are the most common form of renewable energy. The conversion of biomass into energy can be achieved in a number of ways. The most common form of converted biomass is pellet fuels as biofuels made from compressed organic matter or biomass. Pellets from lignocellulosic biomass has compared to conventional fuels with a relatively low bulk and energy density and a low degree of homogeneity. Thermal pretreatment technology like torrefaction is applied to improve fuel efficiency of lignocellulosic biomass, i.e., less moisture and oxygen in the product, preferrable grinding properties, storage properties, etc.. During torrefacton, lignocelluosic biomass such as palm kernell shell (PKS) and empty fruit bunch (EFB) was roasted under an oxygen-depleted enviroment at temperature between 200 and $300^{\circ}C$. Low degree of thermal treatment led to the removal of moisture and low molecular volatile matters with low O/C and H/C elemental ratios. The mechanical characteristics of torrefied biomass have also been altered to a brittle and partly hydrophobic materials. Unfortunately, it was much harder to form pellets from torrefied PKS and EFB due to thermal degradation of lignin as a natural binder during torrefaction compared to non-torrefied ones. For easy pelletization of biomass with torrefaction, pellets from PKS and EFB were manufactured before torrefaction, and thereafter they were torrefied at different temperature. Even after torrefaction of pellets from PKS and EFB, their appearance was well preserved with better fuel efficiency than non-torrefied ones. The physical properties of the torrefied pellets largely depended on the torrefaction condition such as reaction time and reaction temperature. Temperature over $250^{\circ}C$ during torrefaction gave a significant impact on the fuel properties of the pellets. In particular, torrefied EFB pellets displayed much faster development of the fuel properties than did torrefied PKS pellets. During torrefaction, extensive carbonization with the increase of fixed carbons, the behavior of thermal degradation of torrefied biomass became significantly different according to the increase of torrefaction temperature. In conclusion, pelletization of PKS and EFB before torrefaction made it much easier to proceed with torrefaction of pellets from PKS and EFB, leading to excellent eco-friendly fuels.

• Korean Journal of Food Science and Technology
• /
• v.53 no.4
• /
• pp.382-390
• /
• 2021

In this study, solubilized yuzu pulp powder (EYP) was produced using enzyme treated yuzu pulp powder (YP) and used to manufacture yuzu granules (0-20% EYP content). The physicochemical, product stability, and functional properties of Yuzu granules were compared among five enzyme treatments. Among the five treatments, CL had the highest YP solubilization yield (48.68%). Microstructural observation of EYP using FE-SEM revealed that its surface became irregular and porous after enzymatic treatment. Compared to YP, EYP had 2 times lower insoluble dietary fibers and 3 times lower hemicellulose and cellulose content. Among the yuzu granules, IV (yuzu granules with 15% EYP) had an excellent water and oil holding capacity and flowability. IV granule had the highest narirutin and hesperidin content of 3.4 mg and 2.2 mg/g DW, respectively and the highest antioxidant (68.4%) and tyrosinase inhibitory activities (82.5%). Therefore, EYP or granule with EYP can be used as a functional component in food industry or pharmaceutical field.

• Restorative Dentistry and Endodontics
• /
• v.27 no.6
• /
• pp.587-599
• /
• 2002

Extracellular single unit recordings were made from the ventral posteromedial thalamic (VPM) nociceptive neurons to determine mechanoreceptive field (RF) and response properties. A total of 44 VPM thalamic nociceptive neurons were isolated from rats anesthetized with urethane-chloralose. Based on responses to various mechanical stimuli including touch, pressure and pinch applied to the RF, 32 of 44 neurons were classified as nociceptive specific (NS) neuron. The other 12 neurons, classified as wide dynamic range (WDR), showed a graded response to increasingly intense stimuli, with a maximum discharge to noxious pinch. The VPM nociceptive neurons showed various spontaneous activity ranged from 0-6 Hz. They were located throughout the VPM, and had an contralateral RF including mainly intraoral (and perioral) regions. The RF size was relatively small, and very few neurons had a receptive field involving 3 trigeminal divisions. The NS neurons activated only by pressure and pinch stimuli had high mechanical thresholds compared to WDR neurons activated also by touch stimuli. The VPM nociceptive neurons were tested with suprathershold graded mechanical stimuli. Most of 21 NS and 8 WDR neurons showed a progressive increase in number of spikes as mechanical stimulus intensity was increased. In some neurons, the responses reached a peak before the highest intensity was given. Application of 5 mM $CoCl_2{\;}(10{\;}{\mu}\ell)$ solution to the trigeminal subnucleus caudalis did not produce any significant changes in the spontaneous activity, RF size, mechanical threshold, and response to suprathreshold mechanical stimuli of 9 VPM nociceptive neurons tested. 17 of 33 VPM nociceptive neurons responded to noxious heat as well as noxious mechanical stimuli applied to their RF. Application of the mustard oil, a small-fiber excitant and inflammatory irritant, to the right maxillary first molar tooth pulp induced an immediate but short-lasting neuronal discharges upto approximately 4 min in 16 of 42 VPM nociceptive neurons. These results suggest that VPM thalamic nucleus may contribute to the sensory discriminative aspect of orofacial nociception.

• Journal of the Korean Institute of Gas
• /
• v.18 no.5
• /
• pp.33-39
• /
• 2014

Heat transfer oils are used in applications such as chemical plant heating systems, refinery heat exchange systems, certain gas processes, injection molding systems, and pulp and paper processing. These oils are extremely stable and resistant to thermal and oxidative degradation. In the event of a spill or accidental release of heat transfer oils, it can be ignited easily when there is an ignition source. This study discusses the status of safety management through the actual status of the heat transfer oils to prevent fire and explosion accidents in industries for process safety management. The actual status of the heat transfer oils in process system of industries surveyed by a questionnaire developed. The results of this study can be used to help establishment of safety management to prevent fire and explosion accidents, such as the management of heat transfer oils, safe operation and maintenance in heat transfer oil processes.