• Restorative Dentistry and Endodontics
• /
• v.24 no.4
• /
• pp.614-622
• /
• 1999

Recent studies have implicated that more rostral components of the trigeminal spinal nucleus including subnucleus oralis (Vo) in orofacial nociceptive mechanisms. Since there is only limited electrophysiological evidence, the present study was initiated to characterize the receptive field and response properties of malls nociceptive neurons in chloralose/urethan-anesthetized rats. Single neuronal activity was recorded in right subnucleus oralis, and types of nociceptive neurons classified wide dynamic range (WDR), NS (nociceptive specific) and deep nociceptive (D) and the mechanoreceptive field (RF) and response properties were determined. A total of 34 nociceptive neurons could be subdivided into 17WDR neurons, 12NS neurons and 5D neurons. Vo nociceptive neurons had RF involving maxillary and/or mandibular divisions mainly located in the intraoral and/or perioral regions. Majority of Vo nociceptive neurons showed spontaneous activity less than 1Hz. The NS and D neurons activated only by heavy pressure and/or pinch stimuli had high mechanical thresholds compared to WDR neurons activated also by tactile stimuli. Vo nociceptive neurons showed a progressive increase of response to the graded mechanical stimuli. 39% of Vo nociceptive neurons received C-fiber electrical input as well as A-fiber electrical input from their RF, and 45% of them responded to electrical stimulation of the right maxillary first molar. 41% of Vo nociceptive neurons responded to noxious heat applied to their RF, and 18% of them showed an immediate burst of discharges following MO application to the right maxillary first molar pulp. These results indicate that Vo is involved in the transmission of nociceptive information mainly coming from intraoral or perioral region including tooth pulp.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.4
• /
• pp.1-7
• /
• 2012

The increase of OCC solid content after wet pressing will save drying energy greatly. We applied spacers, which used to increase draining rate and bulk in fiber furnishes, to increase the OCC solid contents. MDF fibers (fibers for making medium density fiberboard) and diatomaceous earth were used as spacers, and added 10% by weight to the OCC fiber furnish. Application of high wet pressing pressure to the mixed furnish of spacers and refined OCC did not deteriorate bulk and drainage rate, but their solid contents were increased to 0.5-1.5% without loss of compressive strength when compared to those of unrefined OCC, which is the furnish normally used for mill commercial practice. It is believed that the spacers caused the rate of solid content increase faster in the mixed furnish with OCC at high wet pressing pressure area than the unrefined OCC furnish did. Little amount of starch addition (0.5%) to the spacers helped to keep the strength properties.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.3
• /
• pp.49-59
• /
• 2009

The bast fibers of paper mulberry were dyed by using sappan wood, gardenia, and gallnut extracted under various extraction conditions. The surface absorption rates, color, and sunlight fastness of the dyed fibers were compared to those of the dyed cotton and silk. The K/S values of silk showed the highest values, followed by gallnut, gardenia, and sappan wood. The optimum extraction conditions of the dye materials were 20 g/L (input amount of dye materials per liter), $90^{\circ}C$ (extraction temperature), and 30 minutes (extraction time). The values of saturation were observed to increase with the increase of the amount of dye materials, extraction time, and extration temperature. However, no effect were found on the values of hue and lightness. In all samples, the developed colors dyed by sappan wood and gardenia were the series of YR, and Y, respectively. The colors of dyed cotton and bast fibers of paper mulberry by gallnut were the series of Y and the dyed silk showed the series of YR. The values of saturation of the bast fibers of paper mulberry by sappan wood and gardenia showed the highest values of saturation, followed by cotton, and silk. In the case of gallnut, cotton showed the highest values of saturation, followed by the bast fibers of paper mulberry, and silk. The sunlight fastness were not improved in all dyeing conditions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.4 s.107
• /
• pp.9-15
• /
• 2004

To increase paper strength, refining and wet pressing are performed. Many researches were carried out to identify the origin of paper strength. Since fracture toughness was governed by stress concentration, fracture toughness reflects microscopic paper strength. The aim of this paper is to analyze how paper strength was affected by changes of refining and wet-pressing. Fiber properties and structural, tensile and fracture properties of hand­sheets were evaluated. Especially, fracture toughness was evaluated by J-integral. As the refining proceeds, stock properties maybe divided into two stages such as fibers activation and fines activation according to freeness. In fibers activation stages, about 750-450 mL CSF, the fracture toughness increased with refining and wet pressing but in fines activation stages, about 450-250 mL CSF, the fracture toughness increased only with wet pressing. It is clear that fracture toughness was affected not only by fibers properties but also by fines properties in fines activation stages.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.3
• /
• pp.52-58
• /
• 2013

To evaluate the anisotropic characteristics of Korean traditional paper-Hanji, the physical and mechanical characteristics of hand-made hanji, and machine-made hanji were investigated in this research. The densities of copying paper and newsprint paper appeared to be two times higher than the densities of hand-made hanji using Ssangbal sheet forming and hanji made of paper mulberry fiber. The breaking length, and tear index of both Hanji using Owangbal sheet forming, and hand-made Hanji using Ssangbal sheet forming appeared to be different according to the directions in paper. The breaking lengths of Hanji using Owangbal sheet forming showed little differences according to the directions. Breaking length of Hanji using Ssangbal sheet were slightly higher than those of Hanji using Owangbla sheet forming. The breaking lengths of machine-made hanji, copying paper, and newsprint paper were two to four times higher than those of hand-made Hanji. The breaking length showed higher differences according to the direction than the tear index. The tensile strength according to the directions in paper showed significant differences (${\alpha}$=0.05) in all papers used in this research.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.5 s.108
• /
• pp.1-10
• /
• 2004

The geometry of headboxes is of great importance in obtaining good formation, even basis weight profile and fiber orientation. Therefore, many attentions have been made to examine the influence of the geometry of headboxes on the flow behavior. In this study, to evaluate flow behavior in headboxes, three types of turbulence generators were examined using pilot headbox. Velocity profiles in MD and CD were measured using a pressure monitoring system and flow in headboxes was visualized by dye injection method. CD velocity profiles at three different locations inside the slice of Type A headbox showed that the velocity increased downstream to slice exit and had a pattern with four humps due to the persisting wall effect of step diffusors. Results from the evaluation of normalized velocity profile and flow visualization showed that L-shaped Type C headbox caused a large pressure drop but it lacked in flow stabilizing ability.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.58-67
• /
• 2001

MOW (Mixed Office Waste) mainly consisted of photocopied paper is being recycled to produce tissue or fine paper products. Toner particles that are fused and set on paper surface in photocopying process turns into large and plate-shaped particles after repulping which prevents them to be removed effectively in flotation deinking. The immediate purpose of this study is to find the effective deinking technology that increases the recycling potential of photocopied papers for manufacturing tissue and fine paper products. In this study the effects of pulping temperature and the type of hydrophobic groups of nonionic surfactants on the deinking efficiency of photocopied paper has been investigated. Particle size distribution of the toner particles after pulping and flotation, brightness, yield and ash removal were investigated. The size of toner particles after pulping increased as the pulping temperature was increased. When pulping at the low temperature finer toner particles were generated, however, greater amount of toner particles was found to attach to the fiber. When the pulping temperature was greater than Tg of the toner, the amount of coarse hairy particles increased. When nonionic surfactants with a double bond in hydrophobic groups were used, toner removal efficiency, brightness and ash removal were increased. As the addition level of surfactant was increased, yield decreased rather sharply without improving brightness.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.1
• /
• pp.46-53
• /
• 2002

This study was carried out to analyze the effects of preservation temperature and relative humidity to the physical properties of corrugated fiberboard boxes for fruit and vegetable packaging. The preservation temperature did not affect severely to physical properties of corrugated fiber-board. Relative humidity was a major cause of corrugated fiberboard box quality deterioration. The burst and compressive strengths of experimental boxes measured with Mullen high pressure tester and tong crush tester were decreased gradually as relative humidity increased from 55% to 75%. But, the strength properties slightly decreased relative humidity at 75% or higher. This tendency was the greater for single wall (SW) corrugated fiberboard box than that for double wall (DW). It is suggested that development of the water-resistant corrugated fiberboard and box be needed that can be used under the condition of low temperature and high moisture content, which are being employed in the cold chain system.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.3
• /
• pp.17-22
• /
• 2005

The cleaning efficiency of papermaking felt which is contaminated with fiber fines and various micro-materials was investigated and compared between the application of enzyme and commercial detergent. It was found that the cleaning efficiency by the treatment of acidic-based detergent was more efficient than that of alkaline-based one in the conventional commercial detergent. it was also observed that the treatment design of first acidic-based detergent treatment to second alkaline-based detergent procedure was better in the cleaning efficiency, compared to alkaline based-to-acidic based one. The cleaning property of felt with enzyme was resulted in good cleaning efficiency, without any addition of surfactant. Especially, the enzyme treatment under alkaline condition (pH 10) showed a better cleaning result than that under acidic condition(pH 5). The addition of nonionic surfactant to the enzyme increased the cleaning efficiency of felt and decreased the cationic demand of wastewater. These results showed more favour than the application of conventional commercial detergent.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.1
• /
• pp.13-18
• /
• 2003

This study was done in an effort to evaluate the possibility of recyclability of moisture-proof paper. Because it is difficult to recycle laminated moisture-proof paper, a mixture of styrene-butadiene latex(SB latex) and wax emulsion was used as moisture-proof paper chemicals. A bar coater was applied to make moisture-proof paper and the coated weight was 17 g/$m^2$. The mixing ratios of SB latex to wax emulsion were 85 : 15, 87 : 13, and 90 : 10, respectively. It was observed that the moisture-proof paper treated with SB latex and wax emulsion at the appropriate ratio could be recycled effectively. The moisture-proof paper was similar to base paper in degree of pulping, and there was no significant difference in dispersion between moisture-proof paper and base paper. Most of wax particle which caused the spots during drying process could be removed by flotation process. Tensile strength and tear strength of handsheets made of both moisture-proof paper and base paper after pulping was measured to examine the fiber bonding and no significant difference in mechanical properties was observed.