• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 한국펄프종이공학회 2002년도 추계학술발표논문집
• /
• pp.36-46
• /
• 2002

The accurate characterization of paper structure may provide critical information for ideal selection of raw materials and papermaking processes as well as for predicting the behavior and the quality of final paper products. In this study, local paper structure and the relationship among the structural parameters, thickness, grammage, apparent density and surface roughness of various handsheet and commercial paper samples were evaluated by using recently developed methods. A new concept of surface roughness was also introduced. The results demonstrate that there is significant overestimation in the measured thickness when using the conventional caliper method that originates from the surface roughness and poor paper formation. A novel non-contact thickness tester, referred to as the twin laser profilometer(TLP), provided results that were not subject to these artifacts and thus provided the local intrinsic thickness and consequently the local intrinsic apparent density.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제34권1호
• /
• pp.7-11
• /
• 2002

The print quality of a ink jet printer is generally affected by three major components of the printing process: printer, ink formulation, and paper. The result of this study indicated that the surface sized paper with oxidized starch and cationic starch differed ink jet print quality in terms of ink spread and black optical density of the print image. Paper properties, like air permeability and siting degree, which may influence the ink jet printing were also measured. It was found that black print quality was controlled by starch level and ionic charge on the paper surface. Cationic surface sizing starch improved black ink jet print quality.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제34권1호
• /
• pp.30-36
• /
• 2002

The objective of this study was to investigate the viscosity of coating colors and ink-jet printing properties with different coating colors with various blending ratios of silica based pigments. The volume of pigments was measured to evaluate the effect of the pigments on the viscosity of coating colors. Contact angle, the change of ink diameter, optical density, and the area and perimeter of a printed let-ter were evaluated to examine the effect of the ink absorption on the ink-jet printing properties. Generally, as the amount of silica pigments Increased the ink-jet printing quality improved. But this caused an increase of the overall coating viscosity.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제31권4호
• /
• pp.8-15
• /
• 1999

The effects of Condebelt press drying on the densification of recycled sheets made from KOCC , AOCC UKP and BKP were examined using CLSM (Confocal Laser Scanning Microscope) and thermal image analysis techniques. It was shown that significant improvement in sheet density, compression strength, tensile strength, surface smoothness was obtained by Condebelt drying. Densification effect by press drying was most prominent for recycled KOCC sheets. And this beneficial effect of Condebelt drying of increasing sheet density and strength was shown to provide opportunities of reducing the utilization ratio of AOCC for cost saving.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제32권4호
• /
• pp.34-40
• /
• 2000

This study was carried out to evaluate the effects of enzymatic treatment on the characteristics of KOCC. Novozym 342 and Pulpzyme HC were used for this purpose. Enzymatic treatment greatly increased the freeness of KOCC and Novozym 342 was more effective. WRV was improved only when KOCC was treated with 0.1% Pulpzyme HC. Pulpzyme HC was more effective to improve the flexibility of fiber(conformability angle) than Novozym 342. Coarseness of fiber was decreased with the enzymatic treatment. Fines content greatly decreased with 0.01% addition of enzymes. Novozym 342 was more effective than Pulpzyme HC for this purpose. Apparent density, tensile index and tear index decreased with enzymatic treatment, but stiffness increased. Especially the decrease of apparent density, tensile index and tear index by the treatment with Novozym 342 was significant than those of Pulpzyme HC. Therefore Novozym 342 will be suitable for the removal of fines and for bulky sheet, otherwise Pulpzyme HC will be good.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제46권6호
• /
• pp.34-40
• /
• 2014

Wood fibers for medium density fiberboard (MDF) was used in the filler layer of the white duplex board for increasing thickness and bulk of the board. The MDF fibers and the old corrugated container (OCC) furnish were refined, and mixed together to form paperboard. At optimum mixing ratios and refining degrees, stiffness and tensile strength of the MDF fiber-containing board were higher than those of the board with 100% OCC. It was found that there was possibility to reduced basis weight of the filler layer down to 90% of the all OCC furnish by judicious selection of the mixing ratio and the refining method of the MDF fibers. Drainage rate increase and potential drying energy savings were additional benefits.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제33권3호
• /
• pp.52-58
• /
• 2001

The aim of using grape-bagging paper is preventing damages by light and harmful insects during grape growth. The number of using grape-bagging paper has been increasing because advantages of using it have been confirmed. A technology to produce it has not been fully developed yet. In this study properties of the grape-bagging paper were analyzed. Results showed that air-permeability and transmitted light of grape-bagging paper were important. It was tried to see the influence of paper structure on air-permeability, transmitted light and the grapes saccharinity. For making different structure of grape-bagging paper, papers were produced with different freeness levels at several pressure conditions. Coloration time of Campbell grape with new bagging paper started about 5 days earlier than that with usual bagging paper, It was also possible to improve the saccharinity about 0.1-N0.8 Brix. Because new bagging paper has a low apparent density, it affected the saccharinity and coloration time of grape.

• Resources Recycling
• /
• 제4권1호
• /
• pp.46-51
• /
• 1995

After removal of mercury in the silver oxide batteries with the distillation process, the leaching of valuable metals from the residue was studied. The distilled residue was reacted with the various HNO, concentration, reactlon temperature, readion time and pulp density. It was found that the optimum condition for leachmg was 2N HNO,, 40-60% reaction temperature, 6 hours reaction tlme and 10g/200ml pulp density. More than 99% of silver and zinc were dissolved in this process while less than 50% of iron and nickel were leached

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제37권3호
• /
• pp.23-32
• /
• 2005

A change of z-directional structural and surface properties by calendering has a great influence on liquid penetration into a sheet. It could be also important for multi-ply sheet because it contacts liquid dunhg coating or converting process. Therefore, this study was aimed to evaluate of a change of z-directional structure in multi-ply sheet by calendering. To do this, multi-ply sheets were prepared with various raw materials and calendered at the different pressure and temperature conditions. In multi-ply sheet which consisted of one kind of pulp fiber, thickness reductions were higher in top and bottom plies than in middle plies. And in the case of soft nip calender treatment with high temperature, top layer which was in contact with heating roll showed the highest reduction of thickness. Hard nip calender treatment showed U-shaped density profile in z-direction, but compression profile by SNC treatment was dependent on calendering condition. To examine z-directional structure of multi-ply sheet which was composed of different raw material for each layer, CLSM (Confocal Laser Scanning Microscopy) analyses were carried out on cross direction of sheet. It turned out to be a useful tool for investigating z-directional analysis. As a result, variation of thickness reduction in z-direction is dependent on ply structure, compressibility of pulp fiber, and calendering condition.

• Journal of the Microelectronics and Packaging Society
• /
• 제24권3호
• /
• pp.57-62
• /
• 2017

In the process for preparing Ag-coated Cu flakes by electroless silver plating using hydroquinone reducing agent, Ag coating qualities were compared by changing various process parameters such as type of pretreatment solution, plating temperature, pH of plating solution, type and injection rate of plating solution, and pulp density. Effective pretreatment solution for removing the oxide layer on a Cu flake was preferentially suggested. The conditions of low plating temperature, pH value of 4.34, slow injection rate of Ag plating solution, elimination of deionized water in the Ag plating solution, and high pulp density significantly suppressed the formation of separated tiny Ag particles, and thus the surface coverage of Ag coating on Cu flakes was enhanced.