• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.1
• /
• pp.86-93
• /
• 2000

High Colored kraft bleaching effluent is one of the main constrains in pulp and paper industry due to its dissloved lignin derivatives. The degradation of lignin in pulp and paper mill effluent is mainly caused by white-rot fungi. This paper showed that the treatment with KS-62 fungus significantly reduced the color and chemical oxygen demand in the effluent. The amounts of Mn ions in the wastewater would play roles in the induction and activity of MnP (Managanese peroxidase). Extracellular MnP was isolated from the fungus KS-62. The treatment with the MnP had the most effective decolorizatiion in the wastewater treatment using nutrients mediu.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.4
• /
• pp.10-17
• /
• 2000

The change of fiber length, freeness, initial forming drainage velocity, specific filtration resistance, final drainage time and wet web dryness were measured to investigate the effect of the refining load on the drainage characteristics of pulp. The arithmetic average fiber length after refining with higher refining load was shorter than that obtained with lower refining load. Higher refining load decreased initial forming drainage velocity, final drainage time and wet web dryness. The refining load also affected the relationship between freeness and specific filtration resistance, initial forming drainage velocity, final drainage time. It was found that the specific filtration resistance is better than freeness to predict the drainage characteristics of pulp and the wet dryness.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.27-35
• /
• 2008

In order to determine the most appropriate recycling line to treat old corrugated container (OCC) to substitute unbleached kraft pulp (UKP) for the manufacture of kraft paper, three recycling lines were evaluated in pilot scale tests. The recycling line consisting of kneading, flotation, washing, dispersion and screening steps was able to produce pulp with acceptable appearance. Kneading was shown to be more efficient treatment to reduce specks than dispersion. In addition, 0.2 mm slot screen was very effective to remove specks. Severe damages on fiber morphology such as shortening of fiber and formation of fines were not observed during mechanical treatments such as kneading and dispersion. Most of strength properties of the kraft paper produced with the recycled pulp were found to be slightly increased after treated in the recycling lines.

• Food Science and Preservation
• /
• v.3 no.2
• /
• pp.179-185
• /
• 1996

This study was carried out for the purpose of improving the persimmon vinegar. Crushed persimmon(persimmon pulp) was used at alcohol fermentation using Saccharomyces bayanus for persimmon alcohol medium preparation. Glucose(8.39%) and fructose(7.96%) were the dominant free sugar in persimmon pulp before the at cohol fermentation. They decreased abruptly during alcohol fermentation and glucose was consumed more rapidly than fructose. Final alcohol concentration was finally reached to 8%(v/v) in 5 days for mentation of persimmon pulp. Pectinase pre-treatment of persimmon pulp resulted in tusker contents of galacturonic acid, galactose, methyl alcohol and isoamyl alcohol in main mash for alcohol fermentation than those in main mash prepared without pectinase pre-treatment. After alcohol fermentation tannin concentration was 350ppm and astringency was not perceived.

• The Journal of the Korean dental association
• /
• v.19 no.6 s.145
• /
• pp.529-533
• /
• 1981

The effect of insulin on the collagen metabolism in dental pulp and gingiva was studied using Sprague-Dawley rat and ³H-proline was injected intraperitoneally and then sacrificed according to predetermined schedule. Lower incisor pulp and gingiva were removed immediatedly and hydrolysed with acid. After digestion, proline and hydroxyproline were separated and analysed quantitatively employing thin-layer chromatography and radioactivity of each amino acid was counted by liquid scintillation counter. The label incorporated into lower incisor pulp and gingiva and radioactivity of ³H-hydroxyproline were increased in insulin administered group. And disappearance rate of ³H-hydroxyproline was decreased. Those results indicated that amino acid, I.e. proline transport and collagen biosynthesis were increased in dental pulp and gingiva by insulin administration.

• Restorative Dentistry and Endodontics
• /
• v.6 no.1
• /
• pp.105-107
• /
• 1980

A total of 125 extracted maxillary first molars were used to study the configuration of the floor of the pulp chamber. The specimens were ground and the pulp chamber was examined with a magnifying glass and explored with sharp explorer. The study showed the shape of the pulp chamber, number of root canals, and type of canal orifice. The results were as follows; 1. In so far as observing the shape of the pulp chamber of the teeth, 50.4% of the teeth were trapezoid, 20.8% were inverted trapezoid, 18.4% were rectangle and 10.4% were triangle shape. 2. 71.2% of the specimens have 3 root canal orifices, and 28.8% have 4 root canal orifices. 3. 71.2% of the specimens have 1 mesiobuccal canal orifice, 23.2% have 2 mesio-buccal canal orifices joined by a groove, and 5.6% have 2 mesio-buccal canal orifices seperated each other.

• Restorative Dentistry and Endodontics
• /
• v.4 no.1
• /
• pp.17-21
• /
• 1978

The histopathological study was made to investigate the pulp reaction of "Hipol". The toxicity against the pulp tissue was compared with the "Zinc-Oxide-Eugenol Cement." A total of 36 cavities of healthy prmanent teeth of the 3 dogs were chosen and filled with the experimental filling materials without base. The teeth were prepared at 3 intervals; a week and two, three weeks as a result of this study. 1) Both "Hipol" and "Adaptic" showed very severe to moderate pulp reactions in the all of the filled teeth. 2) There was little difference between "Hipol" and "Adaptic" in the severity of the pulp reaction. 3) After 3 weeks, the teeth filled with "Hipol" and "Adaptic" showed more or less recovery phenomena. The teeth filled with "Zinc-Oxide-Eugenol Cement" showed marked recovery phenomenon. 4) There was little difference in the histopathological result between "Universal" group and "Catalyst" group.

• Restorative Dentistry and Endodontics
• /
• v.7 no.1
• /
• pp.53-57
• /
• 1981

A total of 130 extracted human maxillary second molars were used to study the configuration of the floor of the pulp chamber. The specimens were ground and the pulp chamber was examined with a magnifier and explored with sharp explorer. The study showed the shape of the pulp chamber, number of root canals, and the type of canal orifice. The results were as follows; 1. In so far as observing the shape of the pulp chamber of the teeth, 16.9% of the teeth were quadrilateral, 70.0% were triangle and 13.1% were ovoid shape. 2. 13.1% of the specimens have 4 root canal orifices. 73.9% have 3 root canal orifices, 11.5% have 2 root canal orifices and 1.5% have single orifice. 3. 13.1% of the specimens have 2 mesio-buccal canal orifices and among the teeth those have 3 canals, 20.8% show 'Y' shape, 29.1% show straight line and 23.8% show obtuse triangle shape.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.4
• /
• pp.68-74
• /
• 1997

This research was studied dissolving pulp for rayon production, which is not KP, SP methods but steam explosion and oxygen alkali treatment. The variation of characterization in wood cellulose after steam explosion and oxygen alkali treatment this follows. In the oxygen alkali treatment of exploded pine wood, yield of dissolving pulp was lower than steam-exploded oak wood, and we have obtained dissolving pulp that high purity cellulose, but degree of polymerization was inclined to decrease less than 200. In the case of steam-exploded oak wood, degree of polymerization was higher than steam-exploded pine wood but purity of cellulose was lower than its.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.5
• /
• pp.24-30
• /
• 2010

Papermaking technology has drastically improved over the last 20 years to face new challenges. Because environmental regulations have become increasingly strict, papermaking systems have had to accommodate elevated recycled pulp content and an increased use of recycled process water. Process water in papermaking systems has become more dirtier and reduced polymer efficiency. Amphoteric PAM demonstrated a higher degree of stability in a high conductivity environment compared to cationic PAM. This was illustrated by the improved retention performance, particularly the ash retention. This amphoteric polymer can be used for board or newsprint production using recycled pulp, especially for the systems where polymer dissolving water is high in conductivity and degradation of cationic functional groups of cationic PAM can occur.