• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.814-820
• /
• 2000

This papers investigates the combined effects of parameters such as die surface finish, die directionality of stoning, contact pressure and draw speed on the resulting friction factor. Also, this study show the correlation between the NN(Neural Network) and DOE (Design of Experiments) to reduce the number of experiments without the loss of the effects of parameter upon friction factor. The experiments were run in random order with at least three replicates. It was found that the directional stoning orthogonal to the pulling direction is lower friction than directional stoning parallel to the pulling direction using FCD55 die and SPCEN

• Transactions of Materials Processing
• /
• v.22 no.4
• /
• pp.223-228
• /
• 2013

The friction coefficients of advanced high strength steel sheets were experimentally determined. In the friction test, the pulling and holding forces acting on the sheet for various friction conditions, such as lubricant viscosity, pulling speed, blank holding pressure, sheet surface roughness, and hardness of the sheet were measured and the friction coefficient was calculated based on Coulomb's friction law. While the friction coefficient, generally, decreases as the value of friction factor increases, the factor associated with the sheet surface roughness shows U shape behavior for the friction coefficient. Furthermore, the relationship between friction coefficient and the wear volume, which was computed for the roughness of both sheet surfaces and the friction area, is linearly proportional.

• Korean Journal of Crystallography
• /
• v.14 no.2
• /
• pp.84-92
• /
• 2003

The fast pulling is easy to modify the distribution of grown-in defects toward fine size, which can be readily removed by additional treatment. In this experiment, The fast pulled crystals with high pulling late over 1.0 mm/min were grown and their grown-in defect distributions were investigated. In our recent developments in the growth of Cz-Si, it could be found that the cooling rate in a specific temperature range and the uniformity of temperature gradient at solid/liquid interface are more important for the formation of grown-in defect than the pulling rate itself. We analyzed these cooling rates and temperature gradients for the various fast pulled crystals and compared them to the observed formation behavior of the grown-in defects. The effective factor (Ω) for the void defect formation was introduced and it could explain the radial distribution of void defects in the fast-pulled crystals effectively.

• Safety and Health at Work
• /
• v.8 no.1
• /
• pp.11-18
• /
• 2017

The purpose of this review is to name and describe the important factors of musculoskeletal strain originating from pushing and pulling tasks such as cart handling that are commonly found in industrial contexts. A literature database search was performed using the research platform Web of Science. For a study to be included in this review differences in measured or calculated strain had to be investigated with regard to: (1) cart weight/ load; (2) handle position and design; (3) exerted forces; (4) handling task (push and pull); or (5) task experience. Thirteen studies met the inclusion criteria and proved to be of adequate methodological quality by the standards of the Alberta Heritage Foundation for Medical Research. External load or cart weight proved to be the most influential factor of strain. The ideal handle positions ranged from hip to shoulder height and were dependent on the strain factor that was focused on as well as the handling task. Furthermore, task experience and subsequently handling technique were also key to reducing strain. Workplace settings that regularly involve pushing and pulling should be checked for potential improvements with regards to lower weight of the loaded handling device, handle design, and good practice guidelines to further reduce musculoskeletal disease prevalence.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.4
• /
• pp.22-26
• /
• 1979

Microlenses with an extremely small radius of curvature are efficiently use d to couple LED/laser diode light into optica1 fiber. We propose a Tapered lens for the highly efficient coupling of the optical fiber communication light souses into the fiber. Ray optical analysis shows that the maximum coupling efficiency is as high as 90 %, Tapered lens with optimum parameters are fabricated by using heating and pulling technique. Experiment shows that this new technique improves the coupling efficiency by two and four times for LED and laser diode, respectively, as compared with the simple flat - end coupling.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.22 no.4
• /
• pp.161-176
• /
• 1995

Leisure motivation is an important concept in the study of leisure behavior. The purpose of this study was to examine visitors' motivations for hot spring resorts in Korea. The data were collected by questionnaires survey in three hot spring resorts in 1994:Suanbo, Paikam, and Chuksan. The findings of this study are summarized as follows: The eight motivation factors extracted by factor analysis such as; 1)"intellectual needs", 2)'escaping everyday life', 3)'closing nature', 4)'recognition or status', 5)'interaction with others', 6)'health', 7)'family vacation', 8)'hot spring bathing'. The three resorts showed significant deferences in the motivation of visitors. Visitors of Suanbo have high motivation for 'intellectual needs', 'interaction with others', and 'thealth', and visitors of Chuksan for 'closing nature', 'family vacation', and 'hot spring bathing'. This study has proved first, psychological(pushing) factors are more important than pulling factors of resorts, second, in pulling factors, natural sceneries were more important than medicinal properties of the hot springs. And this study found several important implications for predicting visitors' demand in hot spring resorts.

• Journal of the Korean Geographical Society
• /
• v.28 no.1
• /
• pp.16-39
• /
• 1993

This study aims to analyze the locational factors which the small firm enterpreneurs in Pusan City mainly consider in deciding location choices for their plants, and then to grasp the differences of the factors in terms of nature of firms, managerial personal characteristics and zoning areas. In order to implement the purpose of the rescarch, data are collected from selected small firm enterpreneurs throughthe questionaire. The main results are summerized as follows. First, it is pointed out that small firm indu-strialists for the regional choice consider crucial rationale as non-economic factor of personal reson with additional consideration of transpor-tation, infrastructure, service, market and labor forces. But in selection of site, they are apt to have high regard on the such factors as infra-structure, service, land and transportation factor. These factors to select the site demonstrate differentiation in terms of character of enter-prises, managerial characteristics and zoning areas. For example, land in the light of indu-strial sector is regarded as an important factor with longer the time of the establishment of firms or more aged or experienced enterpreneurs, wheras infrastructure and service in the heavy and chemical industrial sector are taken up as an important one with shorter the time of establishment of firms or less aged or experienced or higher educational background of enterpren-eurs. In addition, the non-economic factors such as the residential livebility and personal reason are picked up as important factors with smaller the firm or more aged or experienced, lesser educational background of entrepreneurs. Taking into consideration zoning area, infra-structure and service in the industrial area such as the exclusive and semi-industrial areas, land in green belt area, and transportation in the commercial and residential areas are singled out as the most important factors respectively. In addition, the non-economic factors of the resi-dential livability and personal reason in the non-industrial areas are also highly regarded. Second, land is picked up as the most impor-tant one of pulling factors toward the present site while other factors such as infrastructure, service, personal reason are also regarded as the secondary reason for the move-in decision; the pulling factors for the present plant location show somewhat differences in terms of the charcter of the enterprises, managerial chara-cteristics and zoning areas. Policy measures including land, infrastructure under the environmental aspects, service and transportations are, in turn, pointed out as the important ones for pushing factors. Meanwhile, as the important staying factor in the present place, transportation, infrastructure and service under the aspect of the agglomeration benefit, market, personal reason are considered. The pushing and staying factors also shows somewhat distinctive differences in terms of the character of enterprises, managerial chracteristics and zoning area. In the case of zoning area, land is regarded as the most important factor to move out, especially in the non-industrial areas inclu-ding the commerical and residential areas policy measures, infrastructure and service are indicated as important factors to move out. In the mean-time, as the important staying factor, industria-lists in the exclusive and semi-industrial areas point out transportation, infrastructure and service. Whereas the counterparts in the com-mercial area regard transportation and market as important factor, those in the residential area consider the non-economic factors such as personal reason and residential livability. Taking into consideration the result of this analysis, it is identified that the locational chara-cteristics of the intraurban small firm industries are not only associated with the character of enterprises, but also with manager's personal character and the trait of zoning area. Therefore, it seems that the thorough review or examination of enterprises, industrialists' characteristics and zoning areas will have meanin-gful significance in attemption explanation of small firm industries at the intrauban scale in the future. Especially, it appears that the eco-nomic factors such as land, infrastructure, service, transportation, and the non-economic factors such as residential livability and personal reason play together important parts to determine the locational choice of small firm industries along with non-industrial benefit. Thus, such status reveals the obvious implication for the intraurban industrial policy in the future.

• Knowledge Management Research
• /
• v.11 no.4
• /
• pp.67-77
• /
• 2010

MICE (Meetings, Incentive travels, Conventions, and Exhibitions) segment is one of the fastest growing segments of the tourism industry today. Especially, the government promotes the convention business as a strategic industry given its growing importance as a high value-added export. The push-pull factor conceptual frameworks were used to identify motives that lead firms to attend conventions. Furthermore, the authors assess firms' service quality, preference, reliability, and positional advantage of Korea Electronics Show(KES). Using data from a number of Korean trading firms, the authors find considerable results and conclude by discussing recommendation for the convention industry.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.21 no.4
• /
• pp.209-214
• /
• 2011

Objectives: To assess the risk of pushing or pulling the yarn-carrying cart, the survey was performed in some fiber manufacturing factories. Methods: We selected 6 fiber-twisting factories which agreed to in-site survey of their workplace. To measure both initial and sustained forces of the push-pull tasks, Chatillon CSD500 dynamometer(2004, Ametek, USA) was used. The mean of 3 tests for the same cart was adopted as the measured forces. Height and width of cart, weight of spooled yarns, and distance of movement were also measured. Inspection of cart wheel, moving path, and the actual hand position while moving was done. Results: More than one pushing or pulling task exceeded the push-pull force limits of design goal in 5 factories. Though the cart was not loaded the heaviest weight in the factory, the measured push or pull force exceeded the limits several times. A few cart wheels were worn out and tangled with pieces of yarn. It was also observed some holes in the moving path. Conclusions: While the push-pull task is not included in the 11 scopes of over-burdened work notified by Korean government, it should be recognized as risk factor of work-related musculoskeletal disorders. The maintenance work such as regular change and frequent cleaning of cart wheel, the use of fitting wheel, and flattening of bumpy floor through the moving path should be advised importantly in the worksite management of work-related musculoskeletal disorders.

• The Journal of the Korea Contents Association
• /
• v.19 no.5
• /
• pp.426-442
• /
• 2019

This study identifies possible determinants that may have influences on the switching behavior from the current payment system of credit or check cards to the easy payment service based on push-pulling-mooring model. And this research empirically tests how those determinants affect switching intention to the easy payment service. The moderating effect of policy expectation is also taken into account. The findings show switching intention to the easy payment service is influenced by the followings: dissatisfaction with the current payment system as a pushing factor, perceived easy of use and trust in easy payment service as pulling factors, and affective/cognitive inertia and unfavorable subjective norm as mooring factors. The results also show that moderating effect of policy expectation exists in the relationship between perceived ubiquitousness and switching intention.