• Advances in concrete construction
• /
• 제3권2호
• /
• pp.127-143
• /
• 2015

Steel fibre reinforced concrete (SFRC) is an anisotropic material due to the random orientation of the fibres within the cement matrix. Fibres under different inclination angles provide different strength contribution of a given crack width. For that the pull-out response of inclined fibres is of great importance to understand SFRC behaviour, particularly in the case of fibres with hooked ends, which are the most widely used. The paper focuses on the numerical modelling of the pull-out response of this kind of fibres from high-strength cementitious matrix in order to study the effects of different inclination angles of the fibres to the load-displacement pull-out curves. The pull-out of the fibres is studied by means of accurate three-dimensional finite element models, which take into account the nonlinearities that are present in the physical model, such as the nonlinear bonding between the fibre and the matrix in the early stages of the loading, the unilateral contact between the fibre and the matrix, the friction at the contact areas, the plastification of the steel fibre and the plastification and cracking of the cementitious matrix. The bonding properties of the fibre-matrix interface considered in the numerical model are based on experimental results of pull-out tests on straight fibres.

• 전기전자학회논문지
• /
• 제25권1호
• /
• pp.201-205
• /
• 2021

본 논문에서는 push-pull 감지 회로 구조로 인해 load transient 특성을 개선시킨 LDO를 제안하였다. LDO 레귤레이터 패스 트랜지스터의 입력단과 내부 오차증폭기의 출력단 사이에 제안된 push-pull 감지 회로 구조로 인한 전압 델타 값의 응답 특성을 개선시켜 종래의 LDO 레귤레이터보다 load transient 특성에서 우수한 효과를 가진다. 기존의 LDO 레귤레이터보다 rising time에서는 약 244 ns, falling time에서는 약 90 ns 만큼의 향상된 응답속도를 가진다. 제안된 회로는 Cadence사의 Spectre, Virtuoso 시뮬레이션 tool을 사용하여 samsung 0.13um 공정으로 특성 및 결과를 시뮬레이션 하였다.

• Geomechanics and Engineering
• /
• 제36권1호
• /
• pp.71-81
• /
• 2024

This study analyzes the pull-out behavior of tunnel-type anchorage under various joint conditions, including joint direction, spacing, and position, using a finite element analysis. The validity of the numerical model was evaluated by comparing the results with a small-scaled model test, and the results of the numerical analysis and the small-scaled model test agree very well. The parametric study evaluated the quantitative effects of each influencing factor, such as joint direction, spacing, and position, on the behavior of tunnel-type anchorage using pull-out resistance-displacement curves. The study found that joint direction had a significant effect on the behavior of tunnel-type anchorage, and the pull-out resistance decreased as the displacement level increased from 0.002L to 0.006L (L: anchorage length). It was confirmed that the reduction in pull-out resistance increased as the number of joints in contact with the anchorage body increased and the spacing between the joints decreased. The pull-out behavior of tunnel-type anchorage was thus shown to be significantly influenced by the position and spacing of the rock joints. In addition, it is found that the number of joints through which the anchorage passes, the wider the area where the plastic point occurs, which leads to a decrease in the resistance of the anchorage.

• 벤처혁신연구
• /
• 제2권2호
• /
• pp.79-94
• /
• 2019

본 연구의 목적은 농어촌 체험에 영향을 미치는 요인을 통합된 PPM모델(unified push-pull-mooring model)을 적용하여 탐색하는 것이다. 이론적인 모델은 PPM을 근간으로 하여 새로운 변수들을 도입한 통합된 PPM모델이다. 새롭게 도입된 변수 중 pull 요인은 체험이론과 ServQual 모형을 바탕으로 재구성하였다. 종속변수는 고객 만족을 설정하였다. 가설은 다음과 같이 설정하였다. Push 요인은 체험 만족에 부(-)의 영향을 미치고, Pull 요인인 체험요소와 체험품질은 체험 만족에 정(+)의 영향을 미칠 것이다. 또한, mooring 요인은 체험 만족에 부(-)의 영향을 미칠 것이다. 본 연구의 연구 모형을 314개 설문데이터를 기반으로 하여 구조방정식으로 검정하였다. 연구 결과 Pull 요인인 체험품질은 체험 만족에 정(+)의 영향을 미쳤다. Mooring 요인은 체험의도에 부(-)의 영향을 미치는 것으로 나타났다. 하지만, push 요인과 체험 만족 간, 체험요소와 체험 만족 간에는 유의한 영향 관계가 검정되지 않았다. 이러한 연구 결과는 이론적으로는 농어촌 체험에 있어서 기존의 pull, push 요인 위주의 분석에서 나아가 심리적인 mooring 요인도 체험에 중요한 영향을 미친다는 것을 검정하였다. Pull 요인으로 도입된 체험요소와 체험품질을 바탕으로 제안된 통합된 PPM모델이 유용한 분석의 틀이 될 수 있음을 검정하였다. 실무적으로는 농어촌 체험을 활성화시키기 위해 어떠한 요소에 전략적으로나 마케팅적으로 집중해야 하는지에 대한 시사점을 제공할 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.387-394
• /
• 2000

In the present study, laboratory pull-out tests with screw anchors are carried out to investigate behavior characteristics of underground structures applied uplift seepage forces. Small scaled pull-out tests in sand were conducted under saturated condition. And then, it was observed that the upward displacement as well as the pullout load varied with spacing of the anchor. Also, analyses have been performed with the aim of pointing out the effects of various parameters on the group effect of the screw anchors.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.639-642
• /
• 2005

고객이 원하는 다양성을 확보하면서도 생산의 단순성을 유지 할 수 있다면 기업의 고유한 경쟁력이 될 수 있을 것이다. 본 연구에서는 현재 새로운 생산 패러다임으로 인정 받고 있는 Pull Postponement 에 관하여 개념에 대한 이해를 시작으로 성공을 위하여서는 무엇이 필요하고 어떻게 생산 시스템에서 활용 할 수 있는가를 사례를 이용하여 분석, 연구하고자 한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.391-394
• /
• 2005

The seismic performance of bridge piers is evaluated in general by displacement terms, which are yielded not only by the member deformation but also by the pull-out of longitudinal bars embedded into foundation concrete. It is, therefore, important to understand the characteristic of pull-out effect in the view of seismic performance. In this study the specimens with different material strengths and diameters of re-bar were tested and the stree-slip were reported.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1417-1420
• /
• 2001

This paper presents the results of materials and mechanical analyses and performance improvement of pull-off fitting used for catenary. The pull-off fitting is supporting the trolley wire which supplies the electricity. However, the pull-off fitting is repeatedly suffered by the mechanical stresses which produce cracks in the swivel clip, resulting in interruption of an electric car. The characteristic analyses of the swivel clip were performed and the improved swivel clip was suggested.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.823-830
• /
• 2001

The single fiber pull-out technique has been commonly used to characterize the mechanical behavior of fiber/matrix interface in fiber reinforced composite materials. In this study, an improved analysis considering the effect of thermal residual stresses in both radial and axial directions is developed for the single fiber pull-out test. It is found to have the pronounced effects on the stress transfer properties across the interface and the interfacial debonding behavior.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.73-77
• /
• 2004

This study is object to design and structural analysis of Long Pull weight machine. Structural analysis of Long Pull weight machine using result from ANSYS code. This structural analysis results, many variables such as boundary condition, constraints and load condition were considered.