• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.1-9
• /
• 2020

The purpose of this study is to verify the effects of ventilation corridor and derive adequate policy alternatives to its application for the city of Sejong, which is located in an inland of Korean Peninsula. In order to introduce the ventilation corridor in the city, it is necessary both to understand change on fresh air flow affected by the construction of new cities and to show its effects which are able to circulate air flow of the city. The study identified ventilation effects using computational fluid dynamics models. In particular, it analyzed change on wind speed and direction after constructing of a new town and cool air flow along the lowlands generated after sunset. In addition, it identified those of reducing particulate matter when arranging buildings conforming to the ventilation corridor at block level. The policy implications derived from simulation can be summarized as follows. First, it is desirable to plan ventilation corridors so that fresh air from mountains, forests, and valleys can flow into cities and mitigate the concentration of particulate matter. Furthermore, public facilities covering parks, plazas, and playgrounds should be installed preferentially to attract safe outdoor activities near to areas with low levels of particulate matter. Finally, it is adequate to prepare for a number of alternative plans by analyzing ventilation corridors when setting out district unit plan.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.975-982
• /
• 2005

Scientific community agrees about the fact that base Isolation provides interesting solutions to minimize the seismic risk. Reliability of such a technique is nowadays proofed by a large number of applications like public buildings, nuclear plants, bridges, etc. This paper reports the results of performance verification tests of the base isolated RC building with the laminated rubber bearings which is manufactured by enterprise in Korea. The shaking table tests were performed using a three story model scaled to 1/3 of the prototype RC apartment building. Several major earthquake records were scaled to different peak ground accelerations and used as input base excitations. Especially in this study, effect of earthquake characteristics on response reduction and effect of the intensity of excitations are studied. Through the verification tests, the validity of the applied base isolaion device and the response reduction effect against earthquakes are confirmed.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.3
• /
• pp.63-73
• /
• 2017

In contemporary society, it is increasingly common to spend more time indoors. As such, there is a continually growing desire to build comfortable and safe indoor environments. Along with this trend, however, there are some serious indoor-environment challenges, such as the quality of indoor air and Sick House Syndrome. To address these concerns the government implements various systems to supervise and manage indoor environments. For example, green building certification is now compulsory for public buildings. There are three categories of green building certification related to indoor air in Korea: Health-Friendly Housing Construction Standards, Green Standard for Energy & Environmental Design(G-SEED), and Indoor Air Certification. The first two types of certification, Health-Friendly Housing Construction Standards and G-SEED, evaluate data in a drawing plan. In comparison, the Indoor Air Certification evaluates measured data. The certification using data from a drawing requires a considerable amount of time compared to other work. A 2D tool needs to be employed to measure the area manually. Thus, this study proposes an automatic assessment process using a Building Information Modeling(BIM) model based on 3D data. This process, using open source Industry Foundation Classes(IFC), exports data for the certification system, and extracts the data to create an Excel sheet for the certification. This is expected to improve the work process and reduce the workload associated with evaluating indoor air conditions.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.10 no.2
• /
• pp.7-12
• /
• 2014

Government has recently restricted heating and cooling set temperatures for the commercial and public buildings due to increasing national energy consumption. The goal of this paper is to visualize a future two way indoor set temperature control impact on building energy consumption by using TRNSYS simulation modeling. The building was modelled based on the twin test cell with the same dimension. Air source ground coupled heat pump performance data has been used for modeling by TRNSYS 17. Daejeon weather data has been used from Korea Solar Energy Society. The heating set temperature in the reference room is $24^{\circ}C$ as well as the target room set temperature are $23^{\circ}C$, $22^{\circ}C$, $21^{\circ}C$ and $20^{\circ}C$. The cooling set temperature of the reference room is also $24^{\circ}C$ as well as the target room set temperature of $25^{\circ}C$, $26^{\circ}C$, $27^{\circ}C$ and $28^{\circ}C$. For the air source heat pump system, heating season energy consumption is $35.52kWh/m^2y$ in the reference room. But the heating energy consumption in the target room is reduced to 7.5% whenever the set temperature decreased every $1^{\circ}C$. The cooling energy consumption in the reference room is $4.57kWh/m^2y$. On the other hand, the energy consumption in the target room is reduced to 22% whenever the set temperature increased every $1^{\circ}C$ by two way controller. For the geothermal heat pump system, heating energy consumption in the reference room is reduced to 20.7%. The target room heating energy consumption is reduced to 32.6% when the set temperature is $22^{\circ}C$. The energy consumption in the target room is reduced to 59.5% when the set temperature is $26^{\circ}C$.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.3
• /
• pp.56-64
• /
• 2016

While many assessment systems for buildings and indoor environment have been created with increasing interest in sustainable development, assessments for sustainable landscaping and outdoor environments have received less attention. Recently, the Sustainable Site Initiatives(SITES) was developed in the USA in order to evaluate and certify sustainable landscape design projects. The purposes of this study are to analyze sustainable landscape strategies and to review the certification system through case studies of SITES certified projects. Three certified projects in Texas were selected and literature review, site visits and interview were conducted. The results indicated that various sustainable and practical strategies were applied including soil preservation, use of native plants and recycled materials, and water harvesting. Also, SITES has benefits to encourage an integrated design process, community participation, and environmental education for the public. This suggests that a certification system for landscaping and outdoor environments needs to be developed to ensure sustainable site development, which helps extend the roles of the landscape architecture profession in sustainable design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6344-6353
• /
• 2014

According to the changes in society, the knowledge industrial center, which is a factory related to the manufacturing industry, is now including various programs, such as information and communication knowledge. This study defined the knowledge industrial center related law into three periods: deduct layout planning type and outside space composition elements by previous research; case analysis; and suggestions of the direction of layout planning and outside space plan. As a result of the analysis, first, before 1999, the layout of the building is made mainly with a car, but depending on the form of the site, it is configured as a centered, side layout. Second, in the case of distribution, the support facility on the lower part is integrated and the factory on the higher part is distributed, so it is partly integrated and the building is unified. Third, beginning with the activation of privately owned public space in a semi-industrial district according to architecture regulations in 1999, the outside space is wider but the construction area is reduced, so the outside space composition has been changing in a similar manner to the planning methods of business facilities, such as office buildings.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.2
• /
• pp.86-97
• /
• 2010

The royal tombs of the Joseon dynasty are very important cultural heritage with the palaces and Jongmyo. They being promoted as World Heritage of UNESCO and are archaeological sites that need to complex approach. The purpose of this study is to propose the restoration plan of Gimpo Jangreung. The results are as follows: First, in the area of Gimpo Jangreung, there are many land-use except the royal tombs such as a military camp and industrial districts, Public Cemetery, they have to be removed and new routes have to be established same as the original form. Second, the traditional trees such as a pine tree, a fir tree, a big cone pine and a rhododendron etc. have to be planted in the traditional forest. We introduce upper trees and lower trees in the entrance part and religious service part, and pine tree forest in burial mound part and maintain the lawn. Third, the traditional buildings and facilities such as Hongsal-gate, Jaesil, Suragan, Subokbang and Uhjwong have to be restored maintained, and we planed some convinient facilities and rest facilities for visitors.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.4
• /
• pp.98-109
• /
• 2016

The purpose of this study is to identify characteristics of spatial structure of Jiangnan water town in China which has been developed along the water channel. Spatial structural characteristics of the water town, Wuzhen and Nanxun in Zhejiang Province are as follows. First, location of town, spatial framework, lot division, and architectural style get determined by the water channel. The water channel is constructed in cross shape, T-shape, or in combination. Secondly, public space of water town is established along main water channel. Visually and functionally alternating private buildings are established on the water channel side and they are creating unique landscape of Jiangnan water town in overall harmony. Thirdly, residential area is established on the east-west water channel side with southward sunny-faced arrangement and waterside residence is in introvert spatial structure with courtyard but the exterior space is connected with water channel intimately. Fourthly, various spatial components along the water channel enrich the sense of place in water town. The components are corridor with roof, tea house, waterside steps, waterside theater and watergate etc. Uniqueness of place is becoming the core competence in modern townscape. In this aspect, Jiangnan water town with historical and cultural accumulation is suggesting a significant implication. Major implications are as follows. First, promotion of proximity to the water is the basic value that the spatial plan of waterfront needs to pursue. Secondly, mixed use is essential for effective land use and revitalization of waterfront. Thirdly, waterfront plan based on the local uniqueness as the place asset is being required.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.1
• /
• pp.22-31
• /
• 2019

The application of BIM that can manage and integrate information generated during the entire life cycle of buildings in domestic and overseas construction projects is becoming active. When BIM is utilized in the construction phase, it can shorten the construction period, reduce the occurrence of reworks and improve collaboration capability. However, there are limitations in applying BIM to the construction phase due to the insufficient definition level of domestic BIM guidelines and inadequate design standards. In this regard, this study developed BIM model requirements checklist for the application of BIM in the construction phase. To develop the checklists, 21 domestic and overseas BIM guidelines, three public construction projects and four private construction projects to which construction BIM was applied, were analyzed. Based on the guidelines and cases, a total of 62 construction BIM model requirements (31 model objects and 31 attribute rules) and proposed construction BIM model requirement checklists by dividing the 61 requirements according to the requirement and purpose for utilization were identified. It is expected that the practical applications of the checklists proposed in this study will improve the level of BIM model in construction phase. In addition, this study has its significance as a basic research that can be used in the development of standardized guidelines for BIM model in construction phase from academic aspects.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.1
• /
• pp.59-66
• /
• 2019

BIPV or BAPV installation applied to building is increasing through public utility mandates enterprise. Solar PV energy generates only during the day, but if it is operated in convergence with ESS, which stores electrical energy, it can restrain the fossil energy used in buildings throughout the day. A solution is to converge with PV system and ESS. However, PV systems and ESS connected to the power grid in parallel can cause problems of electrical stability. A study was conducted on the case of failure to detect islanding operation under the parallel operation of PV generation and ESS that are connected in parallel to power grid. Experiments conducted various non-islanding detections under the operating conditions. In the experiment results, when one PCS - PV inverter or ESS inverter - was operating under the islanding condition, it stopped working within 0.5 seconds of the Korean grid standard. However, when both of PV inverter and ESS inverter were operating at the same time under the islanding situation, the anti-islanding algorithm did not operate normally and both inverters continuously supplied power to the connected RLC loads. islanding detection Algorithm developed by each inverter manufacturer has caused this phenomenon. Therefore, this paper presented a new test standard for islanding detection.