• Journal of Ocean Engineering and Technology
• /
• v.24 no.6
• /
• pp.71-75
• /
• 2010

Although Graphite Compacted Vermicular (GCV) was first observed in 1948, the narrow range for stable foundry production precluded the high volume application of GCV to complex components such as cylinder blocks and heads until advanced process control technologies became available. This, in turn, had to await the advent of modern measurement electronics and computer processors. Following the development of foundry techniques and manufacturing solutions, primarily initiated in Europe during the 1990s, the first series production of GCV cylinder blocks began during 1999. Today, more than 40,000 GCV cylinder blocks are produced each month for OEMs, including Audi, DAF, Ford, Hundai, MAN, Mercedes, PSA, Volkswagen, and Volvo. Given that new engine programs are typically intended to support three to four vehicle generations, the chosen engine materials must satisfy current design criteria and also provide the potential for future performance upgrades without changing the overall block architecture. With at least a 75% increase in the ultimate tensile strength, a 40% increase in the elastic modulus, and approximately double the fatigue strength of either iron or aluminum, GCV is ideally suited to meet current and future of engine design and performance requirements.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.12
• /
• pp.6245-6250
• /
• 2012

Background: With increase in life expectancy, adoption of newer lifestyles and screening using prostate specific antigen (PSA), the incidence of prostate cancer is on rise. Globally prostate cancer is the second most frequently diagnosed cancer and sixth leading cause of cancer death in men. The present communication makes an attempt to analyze the time trends in incidence for different age groups of the Indian population reported in different Indian registries using relative difference and regression approaches. Materials and Methods: The data published in Cancer Incidence in Five Continents for various Indian registries for different periods and/or publications by the individual registries served as the source materials. Trends were estimated by computing the mean annual percentage change (MAPC) in the incidence rates using the relative difference between two time periods (latest and oldest) and also by estimation of annual percentage change (EAPC) by the Poisson regression model. Results: Age adjusted incidence rates (AAR) of prostate cancer for the period 2005-2008 ranged from 0.8 (Manipur state excluding Imphal west) to 10.9 (Delhi) per $10^5$ person-years. Age specific incidence rates (ASIR) increased in all PBCRs especially after 55 years showing a peak incidence at +65 years clearly indicating that prostate cancer is a cancer of the elderly. MAPC in crude incidence rate(CR) ranged from 0.14 (Ahmedabad) to 8.6 (Chennai). Chennai also recorded the highest MAPC of 5.66 in ASIR in the age group of 65+. Estimated annual percentage change (EAPC) in the AAR ranged from 0.8 to 5.8 among the three registries. Increase in trend was seen in the 55-64 year age group cohort in many registries and in the 35-44 age group in Metropolitan cities such as Delhi and Mumbai. Conclusions: Several Indian registries have revealed an increasing trend in the incidence of prostate cancer and the mean annual percentage change has ranged from 0.14-8.6.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.7
• /
• pp.3167-3171
• /
• 2016

Prostate cancer (PCa) is one of the most common diseases in men. It is important to assess prognostic factors and whether high cortisol levels and complex hormonal interactions could be responsible for PCa development. We evaluated the relationship between cortisol, leptin and estrogens in 141 men, 71 with PCa and the remaining 70 constituting a low risk group (LRG). They were recruited for this study from a total of 2906 middle-aged men (ages 45-70 years) who completed an evaluation for prostatic diseases at the Urology Division, Hospital de Clínicas "$Jos{\acute{e}}$ de San $Mart{\acute{i}}n$", University of Buenos Aires, in May 2009. In this cross sectional study, cortisol, PSA, total-testosterone, free-testosterone, bioavailable testosterone, LH and estradiol were measured in serum. We observed increased cortisol levels in PCa patients as compared to LRG cases (p=0.004,). Leptin and estradiol levels were also higher in PCa patients (p=0.048; p<0.0001, respectively). Logistic regression analysis indicated that serum cortisol (OR: 1.110 (95% CI 1.016-1.213), p=0.022), estradiol (OR: 1.044 (95% CI 1.008-1.081), p=0.016) and leptin (OR: 1.248 (95% CI 1.048-1.487), p=0.013) explained 27% of the variance of dependent variables, even after adjusting for age, smoking, BMI and waist circumference. We found increased cortisol levels in PCa patients as compared to LRG, as well as an altered circulating hormonal profile.

• Research in Plant Disease
• /
• v.23 no.1
• /
• pp.1-18
• /
• 2017

Pseudomonas syringae pv. actinidiae, the causal agent of bacterial canker, is currently causing severe economic losses to kiwifruit production worldwide. The pathogen has affected green-fleshed kiwifruit cutlivars and yellow-fleshed kiwifruit cultivars since 1988 and 2006 in Korea, respectively. In recent years, the biovar 3 strains of P. syringae pv. actinidiae were introduced through imported contaminated pollens and have rapidly spread to neighboring kiwiruit orchards by secondary infection, leading to outbreaks of bacterial canker and tremendous damages on yellow- and red-fleshed kiwifruit cultivars. In this review, we summarize the various management practices of bacterial canker of kiwifruit such as disease escaping, cultural practices, blocking of dissemination, early diagnosis, eradication of inoculum sources, chemical control, and trunk injection on the basis of our research works and field experiences and important research products conducted during the last three decades in the world. Finally, we propose a manual for the efficient management of the disease that can be practically utilized at the farmers' orchards in order to keep kiwifruit vines healthy in the future.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.4
• /
• pp.305-312
• /
• 2008

ZnO/Zn redox cycle is the one of the promising thermochemical cycles for hydrogen production via water splitting with high temperature heat source like a concentrated solar energy. This paper reports the particle size effect of Zinc on water splitting behavior. Water splitting reaction experiments were carried out at isothermal conditions of 350 and 400$^{\circ}C$ in TGA (Thermo Gravimetric Analyzer) using four commercial Zinc powders (nano, <10 ${\mu}m$, <150 ${\mu}m$ and $150{\sim}600\;{\mu}m$ particle sizes). Before the experiments, average particle size of Zinc powders was analyzed by PSA (Particle Size Analysis). After the experiments, XRD (X-Ray Diffraction) and SEM (Scanning Electron Microscope) analyses were conducted on the samples. The experimental results showed that particle size had a effect on the conversion of Zinc to ZnO. Zinc conversion was increased, as the particle size decreased. Especially, the nano size particles were aggregated and the particle's morphology changed on the surface during hydrolysis reaction.

• Journal of Powder Materials
• /
• v.27 no.3
• /
• pp.233-240
• /
• 2020

Nano-sized ZnSe particles are successfully synthesized in an aqueous solution at room temperature using sodium borohydride (NaBH₄) and thioglycolic acid (TGA) as the reducing agent and stabilizer, respectively. The effects of the mass ratio of the reducing agent to Se, stabilizer concentration, and stirring time on the synthesis of the ZnSe nanoparticles are evaluated. The light absorption/emission properties of the synthesized nanoparticles are characterized using ultraviolet-visible (UV-vis) spectroscopy, photoluminescence (PL) spectroscopy, and particle size analyzer (PSA) techniques. At least one mass ratio (NaBH4/Se) of the reducing agent should be added to produce ZnSe nanoparticles finer than 10 nm and to absorb UV-vis light shorter than the ZnSe bulk absorption wavelength of 460 nm. As the ratio of the reducing agent increases, the absorption wavelengths in the UV-vis curves are blue-shifted. Stirring in the atmosphere acts as a deterrent to the reduction reaction and formation of nanoparticles, but if not stirred in the atmosphere, the result is on par with synthesis in a nitrogen atmosphere. The stabilizer, TGA, has an impact on the Zn precursor synthesis. The fabricated nanoparticles exhibit excellent photo-absorption/discharge characteristics, suggesting that ZnSe nanoparticles can be alloyed without the need for organic solutions or high-temperature environments.

• Journal of Industrial Technology
• /
• v.25 no.A
• /
• pp.151-156
• /
• 2005

Auto exhausts and air pollution can become trapped in the cabin of vehicle, reducing the amount of oxygen available for breathing. Driver may feel sleepy, headaches, nausea, confusion, dizziness and lower levels of oxygen can damage the driver's general health. Consequently, oxygen generator purified oxygen into the car to help driver get the oxygen driver's body needs. In this study, in order to evaluate the oxygen generator performance, the samples that the various conditions(humidity(50%, 100%), flow and oxygen concentration) were examined. There were three types of oxygen generator; sample 1($2.5{\ell}/min$, $36%O_2$), sample 2($4.5{\ell}/min$, $41%O_2$) and sample 3($5{\ell}/min$, $39%O_2$). As the humidity increased from 50% to 100%, the oxygen concentration of the sample 1(36%), 2(41%) and 3(39%) was reduced $31%O_2$, $38%O_2$ and $38%O_2$, respectively. Also, the each sample measured that effect of human in car on oxygen concentration, if the oxygen concentration is one person in car, each sample of oxygen concentration was $20.8%O_2$, $23.7%O_2$ and $21.2%O_2$. From the above results, it was shown that oxygen generator for car, if the oxygen concentration is increased, effect of humidity is reduced, and that in the sample of supplying a high-rate of oxygen, the oxygen concentration is increased. It was suggested that effect of humidity on oxygen generator for car can be reduced according to the supply of oxygen.

• Nuclear Engineering and Technology
• /
• v.36 no.1
• /
• pp.112-120
• /
• 2004

The purpose of this paper is to analyze the piping failure frequency for the main feedwater system in domestic nuclear power plants(NPPs) for the application to an in-service inspection(ISI), leak before break(LBB) concept, aging management program(AMP), and probabilistic safety analysis(PSA). First, a database was developed for piping failure events in domestic NPPs, and 23 domestic piping failure events were collected. Among the 23 events, 12 locations of wall thinning due to flow accelerated corrosion(FAC) were identified in the main feedwater system in 4 domestic WH 3-loop NPPs. Two types of the piping failure frequency such as the damage frequency and rupture frequency were considered in this study. The damage frequency was calculated from both the plant population data and damage(s) including crack, wall thinning, leak, and/or rupture, while the rupture frequency was estimated by using both the well-known Jeffreys method and a new method considering the degradation due to FAC. The results showed that the damage frequencies based on the number of the base metal piping susceptible to FAC ranged from $1.26{\times}10^{-3}/cr.yr\;to\;3.91{\times}10^{-3}/cr.yr$ for the main feedwater system of domestic WH 3-loop NPPs. The rupture frequencies obtained from the Jeffreys method for the main feedwater system were $1.01{\times}10^{-2}/cr.yr\;and\;4.54{\times}10^{-3}/cr.yr$ for the domestic WH 3-loop NPPs and all the other domestic PWR NPPs respectively, while those from the new method considering the degradation were higher than those from the Jeffreys method by about an order of one.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.5
• /
• pp.212-217
• /
• 2021

The applicability of the white LED from the blue LED of the coating film as a binder for surface and curved coatings were confirmed. The particle size of YAG is D₅₀: 9~10 ㎛, and the crystal structure is garnet (Y₃Al₅O₁₂), cubic. The coating film had no cracks, at the same time, the silica sol was uniformly coated with YAG phosphor, and the YAG content and thickness in the coating film showed a tendency to increase up to 40 ㎛ in proportion to the increase in the amount added. Furthermore, as the YAG content increased, the PL emission intensity increased and the color coordinate shift toward the end of the chromatic locus curve was confirmed.

• The Korean Journal of Urological Oncology
• /
• v.16 no.3
• /
• pp.126-134
• /
• 2018

Purpose: The purpose of this study is to compare the radiation therapy (RT) and radical prostatectomy (RP) of high-risk or locally advanced prostate cancer (PC) patients after neoadjuvant hormonal therapy (NHT). Materials and Methods: This retrospective study evaluated patients underwent RT (42 patients) or RP (152 patients) after NHT at a single center during 2003-2014. Times to biochemical recurrence (BCR), pelvic local recurrence (PLR), metastasis, clinical painful symptom progression (CPSP), castration-resistant PC (CRPC), and overall survival were compared between the RT and RP groups, after adjustment for TN stage, using the Kaplan-Meier method and log-rank test. Results: Significant inter-group differences were observed for age, Gleason score, initial PSA, and clinical and pathological T stages (all p<0.05). During a median follow-up of 71.7 months, the overall incidences of BCR, PLR, metastasis, CPSP, CRPC, and death were 49.5%, 16.5%, 8.3%, 7.7%, 7.7%, and 17.5%, respectively. The median times to BCR were 100 months for RT and 36.2 months for RP (p=0.004), although the median times were not reached for the other outcomes (all p>0.05). The independent predictor of CPSP was RP (hazard ratio, 0.291; p=0.013). Conclusions: Despite significantly different baseline parameters, RP provided better CPSP-free survival than RT among patients with localized high-risk or locally advanced PC.