• Journal of Korean Society of Forest Science
• /
• v.98 no.5
• /
• pp.584-592
• /
• 2009

The objective of this study was to examine the impact of pruning intensity on the vigor and cambial growth of the treated trees, and on the closure of pruning wounds for one year after pruning treatment. Two tree species, Pinus strobus and Acer palmatum, planted broadly in the urban forest of Korea were selected for the experiment. Intensity of pruning, which was estimated by proportion of removed branches, was categorized into five levels with about 10% intervals from lowest 8% up to 46%. Following parameters were examined; cambial electrical resistance (CER) and the cambial growth of trunk at 30 cm above the ground for the years before and after pruning, the cambial growth of stem at 1.5 cm above the branch bark ridge (BBR) of the pruned branch, and closure of pruning wound for one year after pruning. Tree vigor inferred from CER had a tendency to be weakened as pruning intensity increased in P. strobus, while that of A. palmatum was not affected. The trunk growth decreased significantly when the pruning intensity was higher than 30% in both species. The closure of individual pruning wound was related more to the cambial growth of stem at 1.5 cm above BBR than to the pruning intensity. Comparing the closure rate of pruning wound for one year, P. strobus with 72.1% was faster than A. palmatum with 39.3%, which corresponded with the rate of cambial growth of the two species.

• Korean Journal of Plant Resources
• /
• v.26 no.6
• /
• pp.709-717
• /
• 2013

The objective of this study was to examine the effect of root pruning intensity in combination with different initial seedling size on the growth of transplanting seedlings of Quercus acutissima. One-year-old seedlings were divided into three groups depending on their height, i.e. small (< 15 cm), medium (25-35 cm) and large size (35 cm <). Root of seedlings was pruned by three intensity such as, leaving 5 cm (severe), 10 cm (medium) and 15 cm (light) of taproot from the root-collar. After one year, we investigated survival rate, height and root-collar diameter (RCD) increment and final shoot dry weight. Also we measured characteristics of newly developed lateral roots such as number, total length, dry weight and diameter. Severe root pruning showed the lowest survival rate in all seedling size. Height increment, RCD increment and shoot dry weight were decreased with increasing intensity of root pruning. Seedlings of medium and light root pruning showed similar above-ground growth and dry weight of lateral roots. More large seedlings showed good survival rate, height increment and final shoot dry mass in all root pruning intensity. Therefore, one-year-old seedlings of Q. acutissima should be pruned taproot by 10 cm and transplanted to obtain excellent performance and increase the efficiency of transplanting work. Based on the findings of this study, it is important that applying to different root pruning intensity depending on initial seedling size for producing 2-year-old seedlings with excellent growth and high quality.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.2
• /
• pp.109-132
• /
• 2023

The objective of this study was to reveal the impact of thinning and pruning regimes on the physical and mechanical properties of clonal teak wood planted in Java. In this study, a 15-year-old clonal teak plantation was carried out and the obtained data were evaluated with analysis of variance (ANOVA). The results showed that different thinning intensities had a significant impact on the alteration of heartwood volume development (F = 25.63; p < 0.0001). Meanwhile, the impact of different thinning treatments in several physical properties depends on the pruning treatment levels [moisture content (F= 12.18, p < 0.0001); tangential shrinkage (F = 15.60, p < 0.0001); T/R ratio (F = 7.17, p < 0.0001); and volumetric shrinkage (F = 10.81, p < 0.0001)]. However, different thinning intensities had no significant impact on wood basic density alteration (F = 0.72, p = 0.486), while pruning intensities affect the differences between radial (F = 3.52, p = 0.030) and volumetric shrinkage (F = 3.13, p = 0.044). In mechanical properties, thinning intensity levels did not promote any significant differences [modulus of elasticity (F = 1.41, p = 0.248); modulus of rupture (F = 0.94, p = 0.392); compressive strength parallel to grain (F = 0.21, p = 0.813); and compressive strength perpendicular to the grain (F = 0.41, p = 0.669)]. Meanwhile, different pruning treatments and combination treatments were not significantly altered all mechanical properties. These results indicated that the thinning and pruning regimes can enhance the mechanical properties without having a serious alteration in the physical properties of clonal teak wood.

• Korean Journal of Plant Resources
• /
• v.26 no.4
• /
• pp.503-510
• /
• 2013

This study was conducted to determine the optimum intensity of root pruning and the initial seedling size of 1-year-old Quercus serrata for producing 2-year-old healthy seedlings. Large( > 26 cm hight) and small size ( < 24 cm hight) seedlings were pruned their root by the length of 5, 10, and 15cm and then transplanted on nursery. Stem height, root-collar diameter(RCD), height to RCD ratio(H/D ratio), shoot dry weight(DW) and root development were measured during first growing season after transplanting. Seedling size and pruning intensity influenced on shoot growth such as height, RCD, H/D ratio and DW after transplanting. In addition, the development of lateral roots such as number, length, DW and diameter were affected by the seedling size. Taproot pruned by 15cm was shown excellent above-ground growth in large seedling group, but pruned by 10 and 15cm showed respectively better shoot growth in small seedling group. Large seedlings increased their above-ground growth, taproot regrowth, and number of lateral roots more than those of the small seedlings. But the length and DW of lateral roots were increased in the small seedlings. In conclusion, in order to produce high quality 2-year-old seedlings, it is important to produce large size of Q. serrata seedlings. Also root pruning length of 1-year-old Q. serrata was reasonable on 15 cm in taller than 26 cm or 10cm in less than the height.

• Journal of Agricultural Extension & Community Development
• /
• v.7 no.1
• /
• pp.167-173
• /
• 2000

This study was carried out to investigate suitable pruning methods to avoid poor berry setting of 'Kyoho' grapevine in Suwon and Anseong areas. Light pruning increased percentage of bud bursts and number of shoots per bearing mother branches(BMB), cluster weight and percentage of berry sating but it decreased shoot length, number of leaves and, leaf area and leaf weight. There was little difference in soluble solids, titratable acidity, and anthocyanin contents of berries by the treatment of either light or heavy pruning. Shoot length became longer as diameter of BMB thickened, leaf area and chlorophyll content also became larger and diameter of BMB. Total carbohydrate and N, P, K, Ca, and Mg contents showed significantly little difference, but total carbohydrate and Ca contents showed a tendency of continuous increase as diameter of BMB thinned. Number of seeded berries per cluster became fewer as BMB thinned but percentage of berry setting showed an increasing tendency. Cluster weight, berry weight, berry number per cluster, soluble solids, anthocyanin content were higher in case of around 1cm of diameters of BMB.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.557-566
• /
• 2022

This study aimed to obtain basic data on high-quality fruit production and efficient cultivation of persimmon cultivar "Godongsi". In the second year of pruning, the number of fruits per tree according to the number of fruit-bearing mother shoots (300, 400, 500, and 700 [control] treatments) was 676.3, 786.0, 866.7, and 1238.7, respectively. Persimmon cultivar "Godongsi" had a decrease in number of fruits per tree and increase in fruit weight as the pruning intensity increased. The average fruit weight in the 300 treatment group was 212.2 g, which was 1.5 times heavier than that in the control. For a high-quality dried persimmon processing, the rate of grade L fruits (170 g<ｘ≤200 g) and over according to the number of fruit-bearing mother shoots was 86.9%, 48.6%, 33.5%, and 8.1%, respectively. The fruit grade of the pruned treatment group was significantly higher than that of the control. Based on the selling price of dried persimmon, the production amount was significantly higher in the 300 treatment than that in the control. When there were many fruits per tree, there was a decrease in quality and increase in cost of harvesting and processing. In conclusion, pruning is essential to increase the fruit quality (fruit weight and grade) of persimmon cultivar "Godongsi". Moreover, the suitable number of fruit-bearing mother shoots was 300.

• Journal of Korean Society of Forest Science
• /
• v.112 no.3
• /
• pp.303-321
• /
• 2023

To develop the Forest Work Load Index (FWLI) for estimating the work intensity of forest workers, a study focused on forest tending was conducted. To estimate the FWLI, we used the Ovako Working Posture Analysis System (OWAS) and the Work Load Index (WLI). The OWAS is a prominent method used for analyzing musculoskeletal load in work tasks, and WLI is a prominent method used for analyzing the work intensity of workers. The PRI values analyzed for each forest tending project were 185.3 (Thinning), 150.6 (Pruning), 181.1 (Thinning for Forest Fire Prevention), and 197.0 (Thinning for Young Trees). The WLI values, calculated on the basis of the measured heart rates, were 59.5% (Thinning), 53.5% (Pruning), 56.2% (Thinning for Forest Fire Prevention), and 62.3% (Thinning for Young Trees). The FWLI was calculated using the analyzed PRI and WLI values. The FWLI values for the forest tending project were 110.2 (Thinning), 80.7 (Pruning), 102.1 (Thinning for Forest Fire Prevention), and 123.0 (Thinning for Young Trees). The FWLI developed in this study can be used to quantitatively compare the workloads of forest workers. In the future, the analyzed FWLI can be used as a basis for improving forest workers' postures and comparing workloads across different forest projects.

• Korean Journal of Environment and Ecology
• /
• v.27 no.2
• /
• pp.253-265
• /
• 2013

This study was correlation analysis between provision and management of street green and street environment through field survey about city official roads(93 routes, 629.2km) in Seoul. Green belt under the street trees were 17.5% of all routes. Composition of street green belt width of 1~ 2m was the most common(11.6%). Management status as a protected facilities were protect frame and prtect cover installed inerval(60.1%). Interval of pruning was 63.5%. Type of tree was mainly 47.9%. Road width was mainly more than 8-line(51.3%). Sidewalk width was mainly 3~6m(84.1%)in environment status of street. Landuse was mainly commercial and business(70.3%). Electronic wire complete was mainly compete with crown(33.6%). Use of sidewalk was mainly used(16.3%). ANOVA analysis was conducted between the Street green and environment of Street. Street green belt(more than with 3m) was analyzed to be effective in street green manufacture. Natural green area of city's outside and Industrial area were analyzed to be effective. Use of sidewalk was to be a management. Protection facilities are installed on the narrow sidewalk width lower intensity. There was a higher strength in narrow sidewalk width, road width and compete with crown. And type of tree was higher strength similarly. Pruning and type of tree showd a significant correlation. Thus, ensure sufficient sidewalk width and land use should be considered for street green was effective manufacture and management. Species selection and pruning management was needed by consider electronic wire management, type of tree and landscape.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.169-172
• /
• 2005

Modem SAR interferometry (IFSAR) sensors delivering intensity images and corresponding digital terrain model (DTM) allow for a thorough surface lineament interpretation with the all-weather day-night applicability. In this paper, an automatic linear-feature detection algorithm for high-resolution SAR images acquired in Taiwan is proposed. Methodologies to extract linear features consist of several stages. First, the image denoising techniques are used to remove the speckle noise on the raw image. In this stage, the Lee filter has been chosen because of its superior performance. After denoising, the Coefficient of Variation Detector is performed on the result images for edge enhancements and detection. Dilation and erosion techniques are used to reconnect the fragmented lines. The Hough transform, which is a special case of a more general transform known as Radon transform, is a suitable method for line detection in our analysis. Finally, linear features are extracted from the binary edge image. The last stage contains many substeps such as edge thinning and curve pruning.

• Proceedings of the KSRS Conference
• /
• 2000.04a
• /
• pp.91-95
• /
• 2000

위성영상을 이용한 해안선의 추출은 연안 지형의 변화감지의 조간대의 DEM 생성 등 지구과학적인 활용 외에도 지형도와 해도의 수정에도 활용될 수 있다. 바람이 세거나 파랑이 높을 때 돌아오는 레이다의 신호는 육지와 구별이 어렵고 또한 speckle 잡음으로 인하여 SAR를 이용한 해안선 추출은 광학자료에서 사용하는 thresholding 방법이나 간단한 edge detector 등의 방법을 적용하여 좋은 결과를 얻는데 어려움이 있다. 본 연구에서는 SAR 자료를 이용하여 빠르고 정확하게 해안선을 추출할 수 있는 ratio에 기초한 해안선 추출 방법인 MSP-PoA(Maximum Stregth Edged Pruning Ratio of Average)을 경남 낙동강 하구지역의 인공해안선에 대해 적용하여 결과를 분석하였다. 그 결과는 매우 만족할 만 하나, 육지와 해수의 점이적인 특성을 나타내는 조간대가 분포하는 전남 곰소만 지역에서는 SAR intensity의 변화가 크지 않아서 만족할 만한 결과를 얻을 수 없었다. 이러한 지역에 대해서는 SAR의 위상정보를 이용하는 interferogram의 정확도를 정량적으로 평가하는데 사용되는 coherence map을 구하여 해안선을 추출하고자 한다.