• 전자통신동향분석
• /
• 제30권6호
• /
• pp.31-41
• /
• 2015

사람은 User Interface(UI)를 통해 기기와 접촉하고 활용하며, 서비스를 제공받는다. 대부분의 입력 도구들은 사용자의 접촉을 필요로 하기 때문에 기기에 접촉이 불가능한 상황에서는 사용자의 의도를 기기에 전달하기 어렵다. 본고에서는 접촉 없이 사용자 입력을 가능하게 하는 기술 중 적외선 근접센서에 기반을 둔 제스처 센싱기술을 소개한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.185-188
• /
• 1993

The goal of this paper is to develop an on-board controller for a model helicopter's hovering attitude control, using i8096 one-chip microcontroller. Required controller algorithm is programmed in ASM-96 assembly language and downloaded into an i8096 microcontroller. The performance of hovering flight using this system is verified by experiments with the model helicopter mounted on an instrumented flight stand where 3 potentiometers and an optical proximity sensor measure te attitude and main rotor speed of the helicopter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.671-673
• /
• 1999

In order to cope with the occurrence of abnormal operation, rotatory condition monitoring system for guide roller of finishing train in wire rolling has been developed. In this study, proximity sensor and its holding devices that could overcome severe in-situ measurement conditions was designed and MMI software using C++ was programmed. Performance of the developed system turned out to be good enough as results of in-line test for POSCO #3 wire rolling mill. It is expected to contribute to prevent the cobble and the grade-down of products caused by the abnornormal operation of guide rollers.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.71-74
• /
• 1992

This paper describes the automation of the surface grinder for a grinding wheel by application of programmable logic controller(PLC) with a position sensor, and a limit switch. The control system is designed to provide feeding a workpiece on the turn table and pressing it by the upper disk automatically. In this development the automation of checking the thickness of a grinding wheel is most important. In order to measure the relative displacement, the proximity sensors were employed and the sensitivities of the sensors were investicated and discussed the superiority. It has been shown by model experiment that the automation system of the surface grinder is performed satisfactory.

• 한국정밀공학회지
• /
• 제6권4호
• /
• pp.119-125
• /
• 1989

This paper presents a method of analog signal processing for a coordinate transformation. Through the proposed method, two-dimensional position information obtanided from any type of null-detector can be transformed into the information with repect to world coordinate system. In order to implement the method, a null- detection device which consists of four optical proximity sensor is developed. Through the experiments for performance evaluation, the effectiveness of the proposed method has been demonstrated.

• 광학세계
• /
• 통권161호
• /
• pp.58-73
• /
• 2016

사람은 User Interface(UI)를 통해 기기와 접촉하고, 활용하며 서비스를 제공받는다. 대부분의 입력 도구들은 사용자의 접촉을 필요로 하기 때문에 기기에 접촉이 불가능한 상황에서는 사용자의 의도를 기기에 전달하기 어렵다. 본고에서는 접촉 없이 사용자의 입력을 가능하게 하는 기술 중 적외선 근접센서에 기반을 둔 제스처 센싱기술을 소개한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권5호
• /
• pp.1984-2002
• /
• 2020

With the appearance of wireless spectrum crisis in traditional cellular network, device-to-device (D2D) communication has been regarded as a promising solution to ease heavy traffic burden by enabling precise content delivery among mobile users. However, due to the channel sharing, the interference between D2D and cellular users can affect the transmission rate and narrow the throughput in the network. In this paper, we firstly present a weighted interference minimization cluster formation model involving both social attribute and physical closeness. The weighted-interference, which is evaluated under the susceptible-infected(SI) model, is utilized to gather user in social and physical proximity. Then, we address the cluster formation problem via spectrum clustering with iterative operation. Finally, we propose the stable matching theory algorithm in order to maximize rate oriented to accomplish the one-to-one resource allocation. Numerical results show that our proposed scheme acquires quite well clustering effect and increases the accumulative transmission rate compared with the other two advanced schemes.

• 한국컴퓨터정보학회논문지
• /
• 제23권8호
• /
• pp.101-106
• /
• 2018

Most people with visual impairments can not use both hands freely because they carry a cane. And unnecessary contact with people around you during walking can occur. Other guides include guide dogs, but the price and maintenance cost are expensive and difficult to manage. In this paper, we propose a smart glove, which prevents unnecessary contact when blind people use the cane, detects the obstacle ahead by using the ultrasonic sensor, and informs the presence of the obstacle by using the servo motor. In addition, the electrostatic proximity touch module on the fingers executes a specific application of the smart phone connected by Bluetooth when the finger touches each other. It is designed to allow you to use text or phone calls when you are lost or in an emergency. The results of this study will be used as a tool to provide a more convenient life for the visually impaired.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.121.4-121
• /
• 2001

We propose an off-line methodology for detecting a faulty backup roll that generates eccentricity components, under the condition that the feeding velocity, equivalently the angular velocity of roll, is not constant. From a newly devised speed angle conversion algorithm, we transform all process data into those of a virtual process under a constant feeding speed. This indirectly way, we can apply a spectral analysis to the original process. In addition, we develop an online detection method of roll eccentricity based on newly designed PLG sensor. This PLG sensor is robust because of applying magnetic proximity sensnors and non-contact measurement method.

• 한국전기전자재료학회논문지
• /
• 제30권4호
• /
• pp.253-257
• /
• 2017

Nowadays, it is increasingly important to detect whether cables are live for the operator's safety if there is a sudden power failure. It is especially hard to detect the electrical field of an underground line because of shielding. This paper on detection of live-line states in cables studied the detection characteristics of the change in the magnetic field and axis as the frequency, voltage, and distance at the same load are changed using 3 axes. A search coil type was used as a magnetic field sensor with non-contact. We found that magnetic fields decrease proportionally to the square of the distance and the decrease of rated voltage with load effected to magnetic field. The magnetic field was detected by 3-axis sensors given correct proximity, but appeared as noise components beyond a distance of 2 cm.