• 제목/요약/키워드: proximity coupled

검색결과 41건 처리시간 0.032초

임피던스 정합기를 이용한 근접 결합 급전 패치 안테나의 대역폭 확장 (Bandwidth Enhancement for a Proximity Coupled Microstrip patch Antenna with an Impedance Matching Network)

  • 곽은혁;김부균
    • 전자공학회논문지
    • /
    • 제52권2호
    • /
    • pp.55-69
    • /
    • 2015
  • 근접 결합 급전 방식을 이용한 마이크로스트립 패치 안테나의 급전 선로에 임피던스 정합기를 집적하여 대역폭을 확장하는 방법에 대하여 연구하였다. 여러 가지 유전상수와 두께를 가지는 기판을 사용한 근접 결합 급전을 이용한 패치 안테나에 임피던스 정합기를 집적한 경우와 임피던스 정합기를 사용하지 않은 경우의 대역폭과 방사특성을 비교하였다. 임피던스 정합기를 사용한 경우가 사용하지 않은 경우에 비하여 방사특성의 저하 없이 대역폭이 크게 증가함을 볼 수 있었다.

기판 두께와 천공의 위치 및 크기가 근접 결합 급전을 이용한 천공된 마이크로스트립 패치 안테나의 대역폭과 방사특성에 미치는 영향 (Effect of Substrate Thickness, Perforation Position and Size on the Bandwidth and Radiation Characteristics of a Proximity Coupled Perforated Microstrip Patch Antenna)

  • 이규훈;곽은혁;김부균
    • 한국통신학회논문지
    • /
    • 제39A권6호
    • /
    • pp.310-321
    • /
    • 2014
  • 정사각형 천공이 $2{\times}2$ 배열된 정사각형 패치 안테나에 근접 결합 급전을 이용하여 기판 두께와 천공의 위치 및 크기가 안테나의 대역폭과 방사특성에 미치는 영향에 대하여 연구하였다. 안테나 기판과 급전 기판의 두께가 두꺼워질수록 방사특성의 저하 없이 대역폭이 증가 되었다. 천공 중심의 위치를 패치 길이 방향 가장자리로 이동시키는 경우 방사특성의 큰 저하 없이 대역폭을 증가시킬 수 있었다. 천공 중심의 위치를 패치 폭 방향으로 이동시키는 경우 중심 위치가 대역폭과 방사특성에 미치는 영향이 매우 작았다. 천공의 크기가 작아질수록 대역폭은 증가되고 방사특성은 향상되었다.

A Layout-Based CMOS RF Model for RFIC's

  • Park Kwang Min
    • Transactions on Electrical and Electronic Materials
    • /
    • 제4권3호
    • /
    • pp.5-9
    • /
    • 2003
  • In this paper, a layout-based CMOS RF model for RFIC's including the capacitance effect, the skin effect, and the proximity effect between metal lines on the Si surface is proposed for the first time for accurately predicting the RF behavior of CMOS devices. With these RF effects, the RF equivalent circuit model based on the layout of the multi-finger gate transistor is presented. The capacitances between metal lines on the Si surface are modeled with the layout. And the skin effect is modeled to the equivalent ladder circuit of metal line. The proximity effect is modeled by adding the mutual inductance between cross-coupled inductances in the ladder circuit representation. Compared to the BSIM 3v3 and other models, the proposed RF model shows better agreements with the measured data and shows well the frequency dependent behavior of devices in GHz ranges.

평행평판 도파관의 윗면에 위치한 좁은 슬릿과 넓은 슬릿을 통한 도체 스트립에로의 전자기적 결합 (Electromagnetic coupling to nearby conducting strip through narrow and wide slits in parallel plate waveguide)

  • 이철훈;이종익;조영기
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
    • /
    • pp.113-116
    • /
    • 2000
  • 평행평판의 원면에 위치한 슬릿을 통하여, 슬릿의 바로 윗 부분에 도체 스트립이 있을 때 일어나는 전자기적 결합 현상에 대하여 살펴보았다. 슬릿의 폭이 파장에 비하여 매우 작을 때와 매우 클 때의 두 경우로 나누어서 기술하였다. 슬릿의 폭이 좁은 경우는 기존의 개구결합(aperture-coupled) 마이크로스트립 안테나에 해당되며 슬릿의 폭이 넓은 경우는 기존의 proximity-coupled 마이르로스트립 안테나에 해당된다. 본 연구의 결과는 기존의 마이크로스트립 안테나의 급전구조와 기존의 마이크로스트립 누설파 안테나의 급전구조 설계에 도움을 줄 것으로 생각된다.

  • PDF

전자기적 결합을 이용한 이층 마이크로스트립선로의 접속 구조 (Interconnection structures of bilevel microstriplines using electromagnetic coupling)

  • 박기동;이현진;임영석
    • 전자공학회논문지A
    • /
    • 제32A권8호
    • /
    • pp.47-55
    • /
    • 1995
  • Proximity-coupled open-end microstrip interconnections in bilevel planar structures are investigated through three-dimensional finite-difference time-domain(3D-FDTD) method. Three types of EMC (electromagnetically coupled) microstriplines are considered, collinear lines, transverse lines and modified EMC structure. From the analyzed results, it is found that these EMC interconnections have the coupling coefficient enough to interconnect lines in bilevel structures over a broad-band. The computed results of the modified EMC structure was compared with measurement from physical model and the computed results of via hole interconnection.

  • PDF

Design of Small CRPA Arrays with Circular Microstrip Loops for Electromagnetically Coupled Feed

  • Hur, Jun;Byun, Gangil;Choo, Hosung
    • Journal of electromagnetic engineering and science
    • /
    • 제18권2호
    • /
    • pp.129-135
    • /
    • 2018
  • This paper proposes a design of small controlled reception pattern antenna (CRPA) arrays using circular microstrip loops with frequency-insensitive characteristics. The proposed array consists of seven identical upper and lower circular loops that are electromagnetically coupled, which results in a frequency-insensitive behavior. To demonstrate the feasibility of the proposed feeding mechanism, the proposed array is fabricated, and its antenna characteristics are measured in a full-anechoic chamber. The operating principle of the proposed feeding mechanism is then interpreted using an equivalent circuit model, and the effectiveness of the circular loop shape is demonstrated by calculating near electromagnetic fields in proximity to the radiator. The results confirm that the proposed feeding mechanism is suitable to have frequency-insensitive behavior and induces strong electric and magnetic field strengths for higher radiation gain in extremely small antenna arrays.

Wind tunnel investigation of correlation and coherence of wind loading on generic tall twin buildings in close proximity

  • Lim, Juntack;Bienkiewicz, Bogusz
    • Wind and Structures
    • /
    • 제18권4호
    • /
    • pp.443-456
    • /
    • 2014
  • A popular modern architectural form for tall buildings is two (or more) towers which are structurally linked through such features as a shared podium or sky-bridges. The fundamental features of the wind loading and the structural links of such buildings can be studied by measuring load components on the individual unlinked towers along with their correlations. This paper describes application of dual high frequency force balance (DHFFB) in a wind tunnel study of the base wind loading exerted on generic tall twin buildings in close proximity. Light models of two identical generic tall buildings of square plan were mounted on DHFFB and the base wind loading exerted on the buildings was simultaneously acquired. The effects of the relative positions of the buildings on the correlations and coherences involving loading components on each building and on the two buildings were investigated. For some relative positions, the effects of the building proximity on the wind loading were significant and the loading was markedly different from that exerted on single buildings. In addition, the correlations between the loadings on the two buildings were high. These effects have potential to significantly impact, for example, the modally-coupled resonant responses of the buildings to the aerodynamic excitations. The presented results were not meant to be recommended for direct application in wind resistant design of tall twin buildings. They were intended to show that wind loading on tall buildings in close proximity is significantly different from that on single buildings and that it can be conveniently mapped using DHFFB.

Wind-induced response of structurally coupled twin tall buildings

  • Lim, Juntack;Bienkiewicz, Bogusz
    • Wind and Structures
    • /
    • 제10권4호
    • /
    • pp.383-398
    • /
    • 2007
  • The paper describes a study of the effects of structural coupling on the wind-induced response of twin tall buildings connected by a skybridge. Development of a dual high-frequency force balance used in wind tunnel investigation and background information on the methodology employed in analysis are presented. Comparisons of the wind-induced building response (rooftop acceleration) of structurally coupled and uncoupled twin buildings are provided and the influence of structural coupling is assessed. It is found that the adverse aerodynamic interference effects caused by close proximity of the buildings can be significantly reduced by the coupling. Neglecting of such interactions may lead to excessively conservative estimates of the wind-induced response of the buildings. The presented findings suggest that structural coupling should be included in wind-resistant design of twin tall buildings.