• Journal of Astronomy and Space Sciences
• /
• 제14권2호
• /
• pp.259-268
• /
• 1997

천문대에서 개발 중에 있는 CCD를 사용한 극미 광 영상장비의 시험모델 개발과 현재까지의 결과를 논의하였다. 고도의 저 잡음 도와 안정성이 요구되는 천문관측용 극미 광 영상장비는 자외선에서 가시 광 및 근 적외선 영역에 이르기까지 매우 넓은 파장영역에서 관측을 수행할 수 있는 장비로서 여러 분야에 널리 사용되고 있다. 그러나 현재가지 국내에서는 이 장비의 핵심부분인 controller의 자체설계 기술이 확보되어 있지 않은 실정이다. 이 연구에서 개발된 시스템의 전자 부는 한 개의 EPLD(Erasable Programable Logic Device)에 구현된 controller와, 그 외에 analog driver, video processor로 이루어져 있으며 CCD의 암잡음을 줄이기 위한 방법으로 액체질소 냉각방식을 사용하고 있다. 전체적인 제어와 자료처리는 범용성을 고려하여 개인용 컴퓨터(PC)를 이용하였다. 액체질소 냉각용 cryostat와 CCD 소자를 제외한 대부분이 자체 설계제작 되어진 이 시스템으로 실험실과 소백산천문대에서 시험영상을 얻는데 성공하였다.

• 해양환경안전학회지
• /
• 제17권3호
• /
• pp.275-281
• /
• 2011

선박의 건조 공정 중 병목공정에 해당하며 전적으로 숙련자의 수작업으로만 이루어지는 공정이 곡가공 공정이다. 이러한 곡가공 공정을 자동화 하고자 산업계와 학계의 많은 노력이 경주되었다. 기존의 곡가공 자동화 시스템 개발은 산업계와 학계에서 오랜 동안 연구되어 왔음에도 불구하고 실제로 생산현장에 투입되어 성공적으로 운영되는 사례는 없었다. 본 연구는 이러한 기존 곡가공 자동화 시스템 개발의 문제점을 파악하고 이를 해결할 수 있는 대안으로 요구사항 정의, 시스템 설계, 하부시스템 및 구성요소의 구현, 시스템 통합 및 검증의 4단계 시스템 엔지니어링 기반의 시스템 개발방법론을 제안하였다. 제안된 개발방법론을 기반으로 선체 곡가공 자동화 시스템 프로토타입 개발에 적용하고 결과를 고찰하여 기존 곡가공 자동화 시스템 개발에서의 문제점을 해결할 수 있는 대안이 될 수 있음을 확인하였다.

• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.3197-3206
• /
• 2011

본 연구의 목적은 무기체계 또는 탄약의 효과분석을 위한 데이터를 생산할 수 있는 방법을 제공하는데 있다. 따라서 본 논문에서는 다양한 전장환경하에서 지대지 곡사화기 효과도 데이터 생산방법론 연구를 통한 모형을 개발하였다. 이러한 목적을 위해서 피해면적과 기대피해율 계산을 위해 사용되어지는 수리적 방법을 분석하였고, 지대지 곡사화기의 효과도 데이터를 생산하기 위한 모형에 적용하였다. 제시된 모형의 타당성 검증을 위해서, 미 합동 탄약교범에 검증할 수 있는 기초자료를 수집하였고 그 기초자료를 개발된 모형에 적용하여 결과값 비교를 통한 검증을 하였다.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.518-526
• /
• 2018

As a new technical approach, this paper introduces a method for improving an electrically propelled outboard motor in consideration of the driving system applied to an electric-propulsion boat with solar cell energy. The most efficient model for a drive shaft, propeller shaft, and bevel gear was suggested and examined with respect to the results of test operation in prototype mode. Furthermore, this research included a performance evaluation of the manufactured prototype to acquire the purposed quantity value and the development items. After manufacturing the desired prototype of an electrically propelled outboard motor, the maximum sail time, thrust force, noise, and weight were evaluated in a performance test. An additional test in relation to the maximum sail speed (knots) of the completed prototype was conducted using a sea trial evaluation to acquire the optimum quantity.

• 한국인터넷방송통신학회논문지
• /
• 제22권4호
• /
• pp.103-109
• /
• 2022

수면 중 발생되는 영유아의 높은 사망률 때문에 영유아 케어에 대한 중요성이 대두되고 있다. 본 연구에서는 블루투스 기술을 이용하여 스마트폰 으로 제어되는 Infant Care 디바이스의 초기 모델을 개발하였다. 개발된 모델은 MCU, 가속도 센서, 온도 측정 센서, 소리 센서, 블루투스 모듈, 카메라 모듈로 구성된다. 개발된 어플리케이션과 블루투스 기술을 사용하여 측정된 유아의 낙상 감지 신호 정보, 울음 감지 신호 정보, 발열 감지 신호 정보를 부모의 스마트폰과 컴퓨터 모니터를 통해 표출 하였다. Bluetooth Low Energy를 이용하여 저 전력 구동을 구현함으로서 구현된 Infant Care 시스템의 초기 설계모델의 유용성에 대해 확인 하였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권2호
• /
• pp.113-121
• /
• 2014

A subsea oil production system must be safely operated for 20-30 years after being installed. Because of the severe conditions of the subsea environment, such as extreme high pressure, low visibility, the possibility of unexpected impact by any object, and corrosion by seawater, subsea oil production systems should be monitored by subsea data logger systems and remotely operated vehicles to check for abnormal vibration and leakage to prevent a catastrophic accident. Because of the severity of subsea environmental conditions and the dominance of a few companies in the market, many people have thought that it would be difficult to develop a subsea data logger system. The primary objectives of the study described in this paper were to analyze existing subsea data logger systems to establish the requirements for a subsea data logger system, implement a prototype subsea data logger system, and conduct a test of the prototype subsea data logger system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1008-1013
• /
• 2003

This paper concerns the structural characteristic analysis and evaluation on the hydrostatic guide way and feeding system of a high precision centerless grinder for machining ferrules. In order to realize the required accuracy of ferrules with sub-micron order, the axial stiffness and motion accuracy of feeding system have to become higher level than those of existing centerless grinders. Under these points of view, the physical prototype of feeding system consisted of steel bed, hydrostatic guide way and ballscrew feeding mechanism is designed and manufactured for trial. Experimental results show that the axial and vertical stiffnesses of the physical prototype are very low as compared with those design values. In this paper, to reveal the cause of these stiffness difference, the structural deformations on the virtual prototype of feeding system are analyzed based on the finite element method under experimental conditions. The simulated results illustrate that the deformation of front ballscrew support-bearing bracket is the main cause of reduction in the axial stiffness of feeding system, and the deflection of bed structure and the bending deformation of hydrostatic guide rails are the main causes of reduction in the vertical stiffness of feeding system.

• 대한기계학회논문집A
• /
• 제28권7호
• /
• pp.896-903
• /
• 2004

This paper proposes the structural characteristic analysis and evaluation on the hydrostatic guide way and feeding system of a high-precision centerless grinder for machining ferrules. In order to realize the required accuracy of ferrules with sub-micron order, the axial stiffness and motion accuracy of feeding system have to become higher level than those of existing centerless grinders. Under these points of view, the physical prototype of feeding system composed of steel bed, hydrostatic guide way and ballscrew feeding mechanism is designed and manufactured for trial. Experimental results show that the axial and vertical stiffnesses of the physical prototype are very low as compared with those design values. In this paper, to reveal the cause of these stiffness difference, the structural deformations on the virtual prototype of feeding system are analyzed based on the finite element method under experimental conditions. The simulated results illustrate that the deformation of front ballscrew support-bearing bracket is the main cause of reduction in the axial stiffness of feeding system, and the deflection of bed structure and the bending deformation of hydrostatic guide rails are the main causes of reduction in the vertical stiffness of feeding system.

• 한국의류학회지
• /
• 제35권1호
• /
• pp.104-114
• /
• 2011

There is rising interest in green energy, energy efficient equipment, and products as countries show increased interest in 'Low Carbon and Green Growth'. The cellphone has become one of the essential influences on modem people beyond the meaning itself by the release and the commercialization of the Smartphone. Thus, it considers that the introduction of fashion for cellphones and digital devices to be always on should be a quite natural design attempt for humans to wear clothes at all times. In addition, outdoor activities increase as the population enjoys more sports and leisure time that requires the development of specialized outwear such as the development of a functional jacket. This specialized field is associated with higher value-added businesses. This study made a prototype of a functional jacket equipped with solar cells that established a system of a fashion design that is harmonious with green growth as a plan to measure of fashion design for green growth. The objects of this study are as follow: First, the study seeks a design method for green growth. Second, it makes a prototype to present the improved design method. Third, it presents the establishment of a design system that considers green growth and the concrete measures practical for the system. It established the design system and made the prototype of functional jacket equipped with solar cells, LED, and digital devices as a measure of design for green growth based on the improvement plan of the design that the problems had been supplemented for. Previous studies were mainly about prototypes that attempted to equip mobile digital devices as a study of smart wear; however, this study leaves the issue of power supply for a follow-up study that is different from preceding studies.

• 한국압력기기공학회 논문집
• /
• 제6권1호
• /
• pp.57-64
• /
• 2010

PHE(Process Heat Exchanger) is a key component required to transfer heat energy of $950^{\circ}C$ generated in a VHTR(Very High Temperature Reactor) to the chemical reaction that yields a large quantity of hydrogen. Korea Atomic Energy Research Institute established the gas loop for the performance test of components, which are used in the VHTR, and they manufactured a PHE prototype to be tested in the loop. In this study, as part of the high-temperature structural-integrity evaluation of the PHE prototype, which is scheduled to be tested in the gas loop, we carried out high-temperature structural-analysis modeling, thermal analysis, and thermal expansion analysis of the PHE prototype. The results obtained in this study will be used to design the performance test setup for the PHE prototype.