• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.3-10
• /
• 2005

In this study, 1-g shaking table tests on the model of CFR(Concrete-Face Rockfill) type "D" dam in operation and the model of virtual ECRD(Earth Core Rockfill Dam) of which static stability is about the same compared to the model of CFRD were carried out. The purpose of this study is to compare the seismic performance of CFRD and ECRD from the analysis of model test results. Displacement response behavior of the dam was examined through the measurement of vertical and horizontal displacement of model dam crest. Also, amplification characteristics of accelerometers installed with dam height were examined through the measurement of acceleration with dam height. Also, in the case of ECRD, patterns of excess pore pressure generation with dam height were examined. From the test results, it was found that accelerations of dam crest of CFRD and ECRD were amplified about 1.52 times and 2 times compared to the accelerations of dam bottom, respectively. amplification was outstanding at three quarters of dam height from the bottom of dam. This phenomenon was outstanding in case of ECRD. And it was estimated that vertical and horizontal displacement of prototype dam of CFRD were 6.8cm (0.1% of dam height) and 12.3cm (0.2% of dam height), respectively. Also, it was estimated that vertical and horizontal displacement of prototype dam of ECRD were 4.3cm (0.1% of dam height) and 5.5cm (0.11% of dam height), respectively.

• 한국인터넷방송통신학회논문지
• /
• 제23권1호
• /
• pp.15-21
• /
• 2023

본 논문은 골프 그린에서 홀 컵을 인식하는 인공 지능 모델의 개발에 관한 연구이다. 그린에서 홀 컵의 인지을 위하여 CNN기반 물체 탐지 알고리즘을 사용하였다. 또한 물체 탐지 알고리즘의 모델을 생성하기 위하여 애플사의 CreateML을 사용하였다. 본 논문은 CreateML의 요구에 맞도록 120개의 학습 이미지 및 주석 데이터로 JSON 파일을 만들었다. 또한 정확한 학습을 위하여 학습 데이터에 데이터 증폭 알고리즘을 사용하여 288개의 학습 데이터로 증폭하였고, 이를 사용하여 학습하였다. CreateML에서 요구하는 Iterations, Batch size, Grid size를 변화시키면서 모델의 성능을 높이는 파라미터 값을 찾았다. 개발된 모델을 적용하여 프로토타입 앱을 개발하였고, 이 프로토타입을 이용하여 실제 골프장 그린에서 홀 컵 인지에 대한 성능을 측정하였다. 측정 결과 일반적인 골퍼의 퍼팅 거리인 10m이내에서 홀 컵을 정확히 인지함을 알 수 있었다.

• Architectural research
• /
• 제12권2호
• /
• pp.15-22
• /
• 2010

Our prediction model is based on the development of "Semantic Location Model." It embodies geometrical and topological information which can increase the efficiency in prediction and make it easy to manipulate the prediction model. Data mining is being implemented to extract the inhabitant's location patterns generated day by day. As a result, the self-learning system will be able to semantically predict the inhabitant's location in advance. This context-aware system brings about the key component of the ubiquitous computing environment. First, we explain the semantic location model and data mining methods. Then the location prediction model for the ubiquitous computing system is described in details. Finally, the prototype system is introduced to demonstrate and evaluate our prediction model.

• Wind and Structures
• /
• 제17권6호
• /
• pp.565-587
• /
• 2013

Obvious vortex induced vibration (VIV) was observed during section model wind tunnel tests for a single main cable suspension bridge. An optimized section configuration was found for mitigating excessive amplitude of vibration which is much larger than the one prescribed by Chinese code. In order to verify the maximum amplitude of VIV for optimized girder, a full bridge aeroelastic model wind tunnel test was carried out. The differences between section and full aeroelastic model testing results were discussed. The maximum amplitude derived from section model tests was first interpreted into prototype with a linear VIV approach by considering partial or imperfect correlation of vortex-induced aerodynamic force along span based on Scanlan's semi-empirical linear model. A good consistency between section model and full bridge model was found only by considering the correlation of vortex-induced force along span.

• Journal of Information Technology Applications and Management
• /
• 제10권1호
• /
• pp.111-125
• /
• 2003

This paper proposes a product data model that can express and enforce integrity constraints on product structure during engineering changes (ECs). The model adopts and extends an active object-oriented database model in order to Integrate IC data and their integrity constraints. Tightly integrated with product structure, It will enable designers to maintain and exchange consistent EC data throughout the product life cycle. In order to properly support operations for ECs, the model provides the data, operations, and Event-Condition-Action rules for nested ECs and simultaneous EC applications to multiple options. in addition, the EC objects proposed In the model integrate the data and Integrity constraints into a unified repository. This repository enables designers to access all EC data and integrity constraints through the product structure and relationships between EC objects. This paper also describes a prototype product data management system based on the proposed model In order to demonstrate its effectiveness.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.743-748
• /
• 2007

This paper describes a lens transmissive type tilting actuator for a projection TV. An electromagnetic analysis and a structural analysis of the tilting actuator system is necessary to design a tilting actuator for a projection TV. The tilting actuator is composed a permanent magnet, coil and yoke as the electromagnetic components and it needs a driving hinge part as the mechanical component. The design of the tilting actuator for the projection TV is performed by the following procedure. Firstly, a magnetic flux density of the tilting actuator system is analyzed by a mathematical theory and an electromagnetic FEM. Secondary, a magnetic circuit method is used to determine tilting force. Thirdly, the structural FEM is carried out with an FE model of a lens-transmissive type tilting actuator and then the prototype of the model is manufactured. The characteristic of the prototype is experimentally observed. Finally, a design for a new hinge configuration is suggested for better performance.

• 한국조경학회지
• /
• 제19권1호
• /
• pp.61-80
• /
• 1991

The purpose of this study is to present the design method to embody the cultural heritage and to reproduce the image of Korean Traditional Garden these days. For this purpose, to begin with, the major elements which can be applied to the planning and design were extracted by to study on the prototype of Korean Traditional Garden, and the process and the outcome for reconstruction of traditional garden were presented by design proposal for the Korean Garden in the exhibition space of EXPO '90, the International Garden and Greenary Exposition, Osaka, Japan, 1990. The study on the prototype of Korean Garden is focused on the spatial organization, the facilities allocation, and the gardening technic of traditional garden, and the major contents of the case study are as follow ; (1) To investigate the constraints and the opportunities of site development by the analysis and the synthesis of the site condition for the case study, (2) To study on the planning technic which can be applied to the site, (3) To establish the planning models which can be introduced into the site and to choose the final model by the comparison and valuation of them, (4) To set up the Master Plan on the basis of the final model. In spite of the fact that the method and the contents have a lot of problems, the significance of this study is to present a possibility to reproduce the Korean Traditional Garden these days, moreover to grope for the opportunities to propagate it internationally.

• 한국대기환경학회지
• /
• 제16권4호
• /
• pp.351-362
• /
• 2000

To set the similarity conditions between a prototype usually in the field and its reduced-scale model is a crucial part in model tests. No technique is available to keep perfect similarity for this procedure so far. The experimental work using a wind tunnel is not exceptional. based on the field measurements, the effect of stack parameters and wind conditions on the dispersion of stack plume has been investigated in the laboratory. in this paper intensive methodology is focused on matching these similarities. Due to the limitations to keep perfect similarity conditions some simplifications are involved in common. In this study geometric conditions and kinematic conditions using Froude number and Reynolds number have been con-sidered to keep the similarity conditions required. From the tests it is found that the critical Reynolds number (Recrit) is 2,700 when the height of stack discharge is 50mm. The dispersion has a similar trend for the higher Reynolds number than the critical Reynolds number. It is also found that different Froude number does not make any significant influence for the normalized tracer gas concentrations at the recipient providing the same ratio of the wind speed to the discharge speed. No significant effect of stack diameter is observed in the normalized tracer gas concentrations with the same Frounde number. The similarity conditions therefore used in this study are reliable to simulate the conditions in prototype into the wind tunnel tests.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.98-101
• /
• 2006

In general, stereo images are widely used to remote sensing or photogrametric applications for the purpose of image understanding and feature extraction or cognition. However, the most cases of these stereo-based application deal with 2-D satellite images or the airborne photos so that its main targets are generation of small-scaled or large-scaled DEM(Digital Elevation Model) or DSM(Digital Surface Model), in the 2.5-D. Contrast to these previous approaches, the scope of this study is to investigate 3-D stereo processing and visualization of true geo-referenced 3-D features based on anaglyph technique, and the aim is at the prototype development for stereo visualization system of complex typed 3-D GIS features. As for complex typed 3-D features, the various kinds of urban landscape components are taken into account with their geometric characteristics and attributes. The main functions in this prototype are composed of 3-D feature authoring and modeling along with database schema, stereo matching, and volumetric visualization. Using these functions, several technical aspects for migration into actual 3-D GIS application are provided with experiment results. It is concluded that this result will contribute to more specialized and realistic applications by linking 3-D graphics with geo-spatial information.

• Structural Engineering and Mechanics
• /
• 제31권5호
• /
• pp.545-566
• /
• 2009

Bridge columns are subjected to combined actions of axial force, shear force and bending moment during earthquakes, caused by spatially-complex earthquake motions, features of structural configurations and the interaction between input and response characteristics. Combined actions can have significant effects on the force and deformation capacity of RC columns, resulting in unexpected large deformations and extensive damage that in turn influences the performance of bridges as vital components of transportation systems. This paper evaluates the seismic response of three prototype reinforced concrete bridges using comprehensive numerical models that are capable of simulating the complex soil-structural interaction effects and nonlinear behavior of columns. An analytical approach that can capture the shear-flexural interacting behavior is developed to model the realistic nonlinear behavior of RC columns, including the pinching behavior, strength deterioration and stiffness softening due to combined actions of shear force, axial force and bending moment. Seismic response analyses were conducted on the prototype bridges under suites of ground motions. Response quantities of bridges (e.g., drift, acceleration, section force and section moment etc.) are compared and evaluated to identify the effects of vertical motion, structural characteristics and the shear-flexural interaction on seismic demand of bridges.