• Journal of the Optical Society of Korea
• /
• v.5 no.2
• /
• pp.60-66
• /
• 2001

The authors discuss a prototype stylus profilometer designed to measure large optics. It consists of a low contact force type probe system, laser reference system, interferometric distance measurement system, and horizontal driving system. The probe contacts the surface ; the height and the horizontal distances of the measurement points are measured by the interferometer. The freely propagated laser beam provides the reference line during the measurement. The developed stylus profilometry shows only $\pm$60 nm of P-V error for the 157 mm diameter spherical mirror.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.225-226
• /
• 2022

In order to secure the practicality of services using drones, improve on-site operability, and improve the convenience of aircraft maintenance, it is necessary to develop a drone station that can be safely stored while ensuring charging performance. Therefore, a total seven points of improvement were derived through laboratory experiments after the development of the first prototype, and an improved second prototype will be developed in the future based on the preceding processes.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.203-210
• /
• 2005

Prototype model of MDU(Master Data Unit), to be employed on KSLV-I, has been developed and tested being interfaced with other units. Before stepping into the development of engineering and flight model phases, we have carried out reliability prediction of prototype MDU in order to assure availability of the unit. This paper describes the method of reliability prediction of prototype MDU and prediction results based on MIL-HDBK-217F, 'Electronic Reliability Design Handbook'.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.11
• /
• pp.1-7
• /
• 1992

The conformance test is a methodology which verifies whether the Implementation Under Test (IUT) conforms to its standard specification or not. In this paper, first, the Conformance Test System(CTS) is implemented in prototype including verification test type, black-box test strategy, conformance test class, remote test structure, and IUT which is described by the ISO Estelle among Formal Description Techniques. Second, through this prototype the proposed system is experimented. The prototype is composed of two modules. The first module is the Estelle-to-Pascal preprocessor which converts the Estelle program to the corresponding Pascal program because the experimental IUT was described using the unexecutable code form of Estelle before being tested by the TD(Test Driver). The TD, the second module, is based on the master-slave concept and plays important role is CTS. The TD acts as the master with the IUTd being the slave. The prototype system is implemented using Turbo-C, Turbo-Pascal and Turbo-Assembly.

• Journal of Information Management
• /
• v.37 no.1
• /
• pp.39-55
• /
• 2006

The prototype of a library is analysed upon the facts that are generalized and recognized as commonsense. On the extension of the prototype, a digital library is considered. Ultimately the libraries' prototype should be steady at any time. A library which is being a digital library to which the best technology at that time applies, should function as the creator of the value by publishing, circulating, and re-production of the information resources.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.2
• /
• pp.338-344
• /
• 2001

According to the MARPOL 73/78 of Convention, all ships should have oil filtering equipment and 15 ppm bilge which satisfy Requirements of MARPOL 73/78. This study is concerned with designing and manufacturing a prototype Oil content Meter(OCM) used in machinery area of ship. The prototype OCM is composed of two parts which are oil content sensing module and data processing unit. The oil content sensing module consists of infra-red light source, photo-diode light receivers, and a glass tube for bilge water sample. The data processing unit has a micro-processor as hard core and peripheral devices. The experimental results of prototype OCM and analysis of collected data reveal linear property between transmitted light and scattered light as long as the bilge water has low level content of oil. And this linear property leads to a oil content detecting method which is programmed and loaded into the data processing unit. The performance of the prototype OCM is compared with that of the commercial OCM in the market.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.4
• /
• pp.35-43
• /
• 1989

An expert system is a software program that solves problems traditionally solved only by a human expert. An expert system captures and manipulates the knowledge and strategies that a human expert applies to solve a problem. In ship design work, experience and knowledge are very important. If expert system for ship design could be developed, efficiency of design work would be increased very much through use of it. This paper is concerned with a general characteristics of expert system and development of the prototype expert system for ship design-a system which can be utilized to improve the vertical plane stability of SWATH Ship.

• Journal of Korean Society for Quality Management
• /
• v.21 no.2
• /
• pp.17-26
• /
• 1993

Process fault diagnosis is a complicated matter because quality control problems can result from a variety of causes. These causes include problems with electrical components, mechanical components, human errors, job justification errors, and air conditioning influences. In order to make the system run smoothly with minimum delay, it is necessary to suggest heuristic remedies for the detected faults. Hence, this paper describes a heuristic methodology of fault diagnosis that is performed using statistical patterns generated by quality characteristics The proposed methodology is described briefly as follows: If a sample pattern generated by random variables is similar to the number of prototype patterns, the sample pattern may be matched by any prototype pattern among them to be resembled. This concept is based on the similarity between a sample pattern and the matched prototype pattern. The similarity is calculated as the weighted average of squared deviation, which is expressed as the difference between the relative values of standard normal distribution to be transformed by the observed values of quality characteristics in a sample pattern and the critical values of the corresponding ones in a matched prototype pattern.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.12
• /
• pp.2157-2164
• /
• 2010

Microgrid is generally defined as cluster of small distributed generators, energy storages and loads. Through monitoring and coordinated control, microgrid can provide various benefits such as reduction of energy cost, peak shaving and power quality improvement. In design stage of microgrid, system dynamic simulation is necessary for optimizing of sizing and siting of DER(distributed energy resources). As number of the system components increases, simulation time will be longer. This problem can restrict optimal design. So we used simplified modeling on energy sources and average switching model on power converters to reduce simulation time. The effectiveness of this method is verified by applying to prototype microgrid system, which is consist of photovoltaic, wind power, diesel engine generators, battery energy storage system and loads installed in laboratory. Simulation by Matlab/Simulink and measurements on prototype microgrid show that the proposed method can reduce simulation time not sacrificing dynamic characteristics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.190-193
• /
• 2004

This paper presents studies on the creation time of scanning path using rapid prototype device. In the case of Jewellery, it needs to take time too much at the whole process of rapid prototype in accordance with heigh of the multi-layered. When increases the number of polygon by heigh of the Multi-layered, it has proper influence on the creation time of scanning path. Therefore, we can get the spending time and the number of polygon for the creation during increase the heigh of the multi-layered. These values are showed by the quantitative. We try to analyze relation between these and heigh of the multi-layered.