• 제목/요약/키워드: protection tube

검색결과 198건 처리시간 0.028초

지오텍스타일 튜브의 2차원 평형해석 및 수리모형시험을 통한 안전성 분석 (2-Dimensional Equilibrium Analysis and Stability Analysis of Geotextile Tube by Hydraulic Model Test)

  • 신은철;오영인
    • 한국지반공학회논문집
    • /
    • 제18권5호
    • /
    • pp.251-260
    • /
    • 2002
  • 지오텍스타일 튜브공법은 고강도 토목섬유인 지오텍스타일을 튜브모양으로 봉합하여 수리학적 방법이나 기계적인 방법으로 내부에 토사를 채워 구조물을 형성하는 공법으로, 지오텍스타일 튜브구조물은 지오텍스타일에 구속된 토사 체로 구성되며, 지오텍스타일과 토사의 복합거동 특성을 나타낸다. 또한, 구조물의 활용분야가 해안 및 호안 침식방지 구조물이나 방파제, 제방 등에 적용되어지므로 설계 및 안정해석 시, 지반공학적 검토와 파도에 의한 수리동역학적 검토가 필요하다. 본 연구에서는 지오텍스타일 튜브의 효율적인 안정해석방법에 대하여 분석하기 위하여, 방파제 (Breakwater), 이안제(Detached breakwater), 돌제(Groin)등과 같은 해안구조물의 경험 및 2차원 평형해석방법을 검토 및 적용하였으며, 해석결과의 실험적 분석을 위하여 이안제형태의 지오텍스타일 튜브에 대한 수리모형시험을 실시하였다. 본 연구에서 수행한 경험식 및 2차원 평형해석 분석은 기존의 수리모형시험을 통하여 도출된 경험식과 파도의 작용을 외력으로 한 2차원 평형해석이론을 적용.검토하였다. 또한, 수리모형시험을 통한 안정해석은 지오텍스타일 튜브의 형태(채움비율 변화), 유의파고(Significant wave height), 천단고(구조물 상부수심)의 확보유무 등의 해석변수조건을 적용하였다. 2차원 평형해석에 의한 지오텍스타일 튜브의 안정해석결과, 활동 및 전도에 대한 안정성은 튜브형태, 접지면적, 유의파고, 투영면적 등의 복합상관관계로 비선형적인 변화를 나타내었으며, 수리모형시험을 통한 안정성 검토결과, 경험식 및 2차원 평형해석결과와 근접한 결과를 나타내었다.

Development and Evaluation of Loop-Mediated Isothermal Amplification Assay for Rapid Detection of Tylenchulus semipenetrans Using DNA Extracted from Soil

  • Song, Zhi-Qiang;Cheng, Ju-E;Cheng, Fei-Xue;Zhang, De-Yong;Liu, Yong
    • The Plant Pathology Journal
    • /
    • 제33권2호
    • /
    • pp.184-192
    • /
    • 2017
  • Tylenchulus semipenetrans is an important and widespread plant-parasitic nematode of citrus worldwide and can cause citrus slow decline disease leading to significant reduction in tree growth and yield. Rapid and accurate detection of T. semipenetrans in soil is important for the disease forecasting and management. In this study, a loop-mediated isothermal amplification (LAMP) assay was developed to detect T. semipenetrans using DNA extracted from soil. A set of five primers was designed from the internal transcribed spacer region (ITS1) of rDNA, and was highly specific to T. semipenetrans. The LAMP reaction was performed at $63^{\circ}C$ for 60 min. The LAMP product was visualized directly in one reaction tube by adding SYBR Green I. The detection limit of the LAMP assay was $10^{-2}J2/0.5g$ of soil, which was 10 times more sensitive than conventional PCR ($10^{-1}J2/0.5g$ of soil). Examination of 24 field soil samples revealed that the LAMP assay was applicable to a range of soils infested naturally with T. semipenetrans, and the total assay time was less than 2.5 h. These results indicated that the developed LAMP assay is a simple, rapid, sensitive, specific and accurate technique for detection of T. semipenetrans in field soil, and contributes to the effective management of citrus slow decline disease.

지혜콘텐츠 유통에 적합한 스마트계약 기반 저작권 보호 모델 (The Smart Contract based Copyright Protection Model for Wisdom Contents Distribution)

  • 윤성현
    • 사물인터넷융복합논문지
    • /
    • 제5권2호
    • /
    • pp.21-26
    • /
    • 2019
  • 지혜콘텐츠는 일반인에 의해서 만들어지며 생활에 필요한 유용한 팁들로 구성된다. 기존의 저작권 보호 시스템은 주로 전문 저작자 또는 기업을 대상으로 하기 때문에 일반인들이 사용하기에는 그 절차가 까다롭고 비용이 많이 소요된다. 블록체인 기반 시스템은 제 3자의 도움 없이 구성원들의 자발적 기여로 블록에 저장된 트랜잭션을 공증할 수 있다. 따라서, 지혜콘텐츠 저작자의 저작권 보호를 위해서는 블록체인 기반의 저작권 보호 모델이 적합하다. 본 논문에서는 블록체인 네트워크에서 실행되는 스마트계약 기반의 저작권 보호 모델을 제안한다. 제안한 모델은 스마트계약 발행, 콘텐츠 구매 그리고 수익 분배 단계로 구성된다. 판매자와 저작자 간의 계약 합의를 위하여 디지털 서명 기법이 적용된다. 스마트계약은 저작자 정보, 콘텐츠 정보, 그리고 지분 비율을 상태로 저장한다. 지혜콘텐츠 구매 시 구매 대금은 스마트계약으로 전송되며 계약에 명시된 지분 비율에 따라서 저작자와 판매자 주소로 재분배된다. 제안한 모델은 일반인 저작자들이 카페, 블로그, 유투브 등의 지혜콘텐츠를 등록 및 관리하는데 적합하다.

인버터식 고효율 네온관용 변압기 (Inverter type High Efficency Neon Transformers for Neon Tubes)

  • 변재영;김윤호
    • 조명전기설비학회논문지
    • /
    • 제16권6호
    • /
    • pp.22-29
    • /
    • 2002
  • 무방향성 규소강판을 사용한 자기식 네온관용 변압기는 내구성이 좋은 반면에 용량에 따른 규소 강판의 무게가 무겁고 외형이 큰 관계로 네온관 설치 작업 시 상당히 불편한 점이 많다. 또한 네온관의 다양한 디스플레이 제어성면에서도 비합리적 이었다. 이를 개선하기 위한 방법으로 네온 트랜스포머의 전원장치 및 2차측 고압 출력부를 고속의 고주파 스위칭 파워 트랜지스터(MOSFET)를 이용하여 상용주파수 60[Hz]를 고속 스위칭 제어를 통하여 20[KHz]의 고주파로 변환시킨후, 네온관을 방전시키기 위한 고전압을 발생시키는 인버터식 네온관용 변압기를 구현하였다. 또한 네온관의 파손이나 누전으로 인한 화재나 인체 감전의 위험을 사전에 방지할 수 있는 보호회로 GFCI(Ground Fault Circuit Interrupter)를 제안 하였다.

An Integrated System for Radioluminescence, Thermoluminescence and Optically Stimulated Luminescence Measurements

  • Park, Chang-Young;Park, Young-Kook;Chung, Ki-Soo;Lee, Jong-Duk;Lee, Jungil;Kim, Jang-Lyul
    • Journal of Radiation Protection and Research
    • /
    • 제43권4호
    • /
    • pp.160-169
    • /
    • 2018
  • Background: This study aims to develop an integrated optical system that can simultaneously or selectively measure the signals obtained from radioluminescence (RL), thermoluminescence (TL), and optically stimulated luminescence (OSL), which are luminescence phenomena of materials stimulated by radioactivity, heat, and light, respectively. The luminescence mechanism of various materials could be investigated using the glow curves of the luminescence materials. Materials and Methods: RL/TL/OSL integrated measuring system was equipped with a X-ray tube (50 kV, $200{\mu}A$) as an ionizing radiation source to irradiate the sample. The sample substrate was used as a heating source and was also designed to optically stimulate the sample material using various light sources, such as high luminous blue light emitting diode (LED) or laser. The system measured the luminescence intensity versus the amount of irradiation/stimulation on the sample for the purpose of measuring RL, TL and OSL sequentially or by selectively combining them. Optical filters were combined to minimize the interference of the stimulation light in the OSL signal. A long-pass filter (420 nm) was used for 470 nm LED, an ultraviolet-pass filter (260-390 nm) was used for detecting the luminescence of the sample by PM tube. Results and Discussion: The reliability of the system was evaluated using the RL/OSL characteristics of $Al_2O_3:C$ and the RL/TL characteristics of LiF:Mg,Cu,Si, which were used as dosimetry materials. The RL/OSL characteristics of $Al_2O_3:C$ showed relatively linear dose-response characteristics. The glow curve of LiF:Mg,Cu,Si also showed typical RL/OSL characteristics. Conclusion: The reliability of the proposed system was verified by sequentially measuring the RL characteristics of radiation as well as the TL and OSL characteristics by concurrent thermal and optical stimulations. In this study, we developed an integrated measurement system that measures the glow curves of RL/TL/OSL using universal USB-DAQs and the control program.

C-arm CT의 필수 성능평가 기준 마련을 위한 연구 (A Study on Establishment of Essential Performance Evaluation Criteria for C-arm Computed Tomography)

  • 김은혜;박혜민;김정민
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제45권2호
    • /
    • pp.127-134
    • /
    • 2022
  • In order to overcome the image quality limitations of the conventional C-arm, a flat panel detector (FPD) is used to enhance spatial resolution, detective quantum efficiency, frame rate, and dynamic range. Three-dimensional (3D) visualized information can be obtained from C-arm computed tomography (CT) equipped with an FPD, which can reduce patient discomfort and provide various medical information to health care providers by conducting procedures in the interventional procedure room without moving the patient to the CT scan room. Unlike a conventional C-arm device, a C-arm CT requires different basic safety and essential performance evaluation criteria; therefore, in this study, basic safety and essential performance evaluation criteria to protect patients, medical staff, and radiologists were derived based on International Electrotechnical Commission (IEC) standards, the Ministry of Food and Drug Safety (MFDS) standards in Korea, and the rules on the installation and operation of special medical equipment in Korea. As a result of the study, six basic safety evaluation criteria related to electrical and mechanical radiation safety (leakage current, collision protection, emergency stopping device, overheating, recovery management, and ingress of water or particulate matter into medical electrical (ME) equipment and ME systems: footswitches) and 14 essential performance evaluation criteria (accuracy of tube voltage, accuracy of tube current, accuracy of loading time, accuracy of current time product, reproducibility of radiation output, linearity and consistency in radiography, half layer value in X-ray equipment, focal size and collimator, relationship between X-ray field and image reception area, consistency of light irradiation versus X-ray irradiation, performance of the mechanical device, focal spot to skin distance accuracy, image quality evaluation, and technical characteristic of cone-beam computed tomography) were selected for a total of 20 criteria.

암호화폐 온라인 커뮤니티와 유튜브의 역할 및 담론분석 연구 : FGI 인터뷰를 중심으로 (Roles and Discourse of Cryptocurrency's Online Community and YouTube : Using Focus Group Interviews)

  • 임한솔;정창원
    • 한국콘텐츠학회논문지
    • /
    • 제20권10호
    • /
    • pp.615-629
    • /
    • 2020
  • 본 연구는 FGI 인터뷰를 중심으로 암호화폐 관련 온라인 커뮤니티와 미디어(레거시 미디어와 유튜브)의 역할과 담론을 분석하고, 이를 바탕으로 암호화폐 정책 방향을 제언했다. 문헌 연구를 통해 투자자 특성과 투자 환경 요인으로서의 커뮤니티와 유튜브의 역할을 분석했다. 암호화폐 전문투자자와 커뮤니티 활동가 인터뷰를 통해 커뮤니티 이용 목적과 역할을 파악했고, 구독자 수 상위 5개의 암호화폐 관련 유튜브 채널을 분석하여 주요 논의 주제를 고찰했다. 연구 결과, 암호화폐 투자는 20~30대가 주도했으며, 레거시 미디어 이용보다 뉴미디어의 정보를 선호하고 신뢰했다. 온라인 커뮤니티는 정서적 동질감과 공감 역할을 하였고, 유튜브는 정보제공의 기능을 주로 수행했다. 담론 분석과 인터뷰 결과, 암호화폐 정책의 일관성과 투자자 보호를 위한 법적 안정성 마련이 필요했다. 본 연구는 문헌 연구, 인터뷰, 커뮤니티/유튜브 내용 분석 등 다양한 연구 방법을 활용해, 뉴미디어의 정보 제공과 정서 공감 역할을 분석했고, 나아가 디지털 뉴딜 블록체인 기술 장려와 금융산업 공정성 저해 방지를 위한 규제 방향성을 제안했다는 점에 의의가 있다.

수리모형시험을 통한 다단식 지오텍스타일 튜브의 안정성 및 파랑 전달특성에 관한 연구 (Hydraulic Stability and Wave Transmit Property of Stacked Geotextile Tube by Hydraulic Model Test)

  • 오영인;신은철
    • 한국지반공학회논문집
    • /
    • 제21권2호
    • /
    • pp.57-65
    • /
    • 2005
  • 지오텍스타일은 지난 30여년 동안 모래주머니, 훼브릭 폼, 게비언 등 다양한 형태의 컨데이너(구속체)로 활용되어져 왔다. 다양한 크기의 지오텍스타일 컨데이너(구속체)는 주로 수러학적 제어구조물로 홍수재해 방지 및 복구 구조물로 적용되었으며, 최근 지오텍스타일의 직조기술, 채움기술 등의 발달과 함께 해안침식방지구조물, 방파제, 제방 등 친환경적이며 신개념의 해안구조물로 적용이 확대되고 있다 본 연구에서는 지오텍스타일 튜브 구조물이 해안구조물로 설치될 경우에 대한 수리모형시험을 통하여 튜브구조물의 수리동역학적 특성(안정성, 파랑제어 및 전달특성)에 대하여 실험적 연구를 수행하였으며, 특히 구조물 단면의 확대와 심해에 설치될 경우를 고려한 다단식 튜브구조물에 대하여 수리모형시험을 실시하였다. 수리모형시험 조건은 해안설치 조건를 고려하여 설치조건과 파랑조건을 요소화하였다. 설치조건은 파랑에 대하여 직각방향과 경사방향으로 설치될 경우를 고려하였으며, 파랑조건은 유의파고 변화를 3.0m~6.0m까지 실험을 실시하였다. 본 연구진의 선행연구결과와 비교할 떼, 다단식 튜브구조물이 단일튜브보다 더 안정적이며, 천단고가 없는 경우가 천단고가 0.5H인 경우에 비하여 더 안정적인 것으로 도출되었다. 또한, 파랑 전행에 대하여 경사로 설치된 경우가 천단고 유무에 관계없이 파랑감쇄능력이 우수한 것으로 나타났다.

Monte Carlo N-Particle Extended 코드를 이용한 연X선 정전기제거장치의 최적설계에 관한 연구 (A Study on the Optimal Design of Soft X-ray Ionizer using the Monte Carlo N-Particle Extended Code)

  • 정필훈;이동훈
    • 한국안전학회지
    • /
    • 제32권2호
    • /
    • pp.34-37
    • /
    • 2017
  • In recent emerging industry, Display field becomes bigger and bigger, and also semiconductor technology becomes high density integration. In Flat Panel Display, there is an issue that electrostatic phenomenon results in fine dust adsorption as electrostatic capacity increases due to bigger size. Destruction of high integrated circuit and pattern deterioration occur in semiconductor and this causes the problem of weakening of thermal resistance. In order to solve this sort of electrostatic failure in this process, Soft X-ray ionizer is mainly used. Soft X-ray Ionizer does not only generate electrical noise and minute particle but also is efficient to remove electrostatic as it has a wide range of ionization. X-ray Generating efficiency has an effect on soft X-ray Ionizer affects neutralizing performance. There exist variable factors such as type of anode, thickness, tube voltage etc., and it takes a lot of time and financial resource to find optimal performance by manufacturing with actual X-ray tube source. MCNPX (Monte Carlo N-Particle Extended) is used for simulation to solve this kind of problem, and optimum efficiency of X-ray generation is anticipated. In this study, X-ray generation efficiency was measured according to target material thickness using MCNPX under the conditions that tube voltage is 5 keV, 10 keV, 15 keV and the target Material is Tungsten(W), Gold(Au), Silver(Ag). At the result, Gold(Au) shows optimum efficiency. In Tube voltage 5 keV, optimal target thickness is $0.05{\mu}m$ and Largest energy of Light flux appears $2.22{\times}10^8$ x-ray flux. In Tube voltage 10 keV, optimal target Thickness is $0.18{\mu}m$ and Largest energy of Light flux appears $1.97{\times}10^9$ x-ray flux. In Tube voltage 15 keV, optimal target Thickness is $0.29{\mu}m$ and Largest energy of Light flux appears $4.59{\times}10^9$ x-ray flux.

튜브형 매트리스를 활용한 방조제 필터공 축조사례연구 (Case History of Sea Dyke Filter Construction Using Geotextile Tube Mattress)

  • 오영인;유전용;김현태
    • 한국지반신소재학회논문집
    • /
    • 제6권1호
    • /
    • pp.9-16
    • /
    • 2007
  • 토목공사의 시공기술과 밀접한 관계를 가지는 토목용 섬유제품인 지오텍스타일은 모래, 흙, 자갈 등의 환경에 노출되는 고분자 재료이다. 이것은 수분차단을 제외한 분리, 보강, 여과, 배수 등의 기능을 가지며 현재 제방공사, 해안 하천의 호안공사, 간척공사 또는 도로, 철도 노상 안정 등의 분야에 광범위하게 이용되고 있다. 방조제의 최종 끝막이 단면은 대규모 사석과 돌망태 등을 이용하여 일차적으로 바다를 막아 해수를 차단하기 때문에 해수의 유입을 차단하여 유속이 저감되기는 하나, 구성 재료가 불규칙하고 간극이 크기 때문에 일반적인 지반내의 침투흐름보다 상당히 빠른 침투가 발생된다. 따라서 끝막이 후속공정인 필터시공 시, 매트 부상현상이 발생되어 필터매트의 원활한 시공에 많은 어려움이 있으며, 토목섬유 필터매트 손상 시 성토재료유실이 발생될 수 있어 단순하게 필터매트의 부상방지 공법 제시의 차원이 아닌 향후 방조제의 국부적변형 및 안정성을 확보하는 보강개념으로 접근이 요구된다. 방조제 필터공의 원활한 수행을 위하여 다양한 실험연구 및 현장시험결과, 양방향 조위조건에서의 필터공은 "이중필터매트+모래 트랜지션" 설치방안이 가장 효과적인 것으로 연구되었으며, 필터매트의 부상문제와 조위영향구간의 필터층 보강효과를 동시에 만족시킬 수 있는 방법으로 지오텍스타일 튜브 매트리스공법(이하 튜브매트리스공법)이 제안되었다. 본 연구에서는 상기 기술한 튜브매트리스 공법에 대한 현장적용성 및 시공성 분석을 위하여 현장시험 시공을 수행하였으며, 시험시공결과 및 현장적용 사례에 대하여 기술한다.

  • PDF