• 방재기술
• /
• 통권19호
• /
• pp.22-28
• /
• 1995

The rate of heat release is probably the single most important measure of fire hazard. Several tech-niques were developed for the measurement of rate of heat release, but were not suitable for fire test-ing purpose. Recently the application of oxygen consumption principle made it possible to development of well-characterized heat release rate measurement apparatus, the furniture calorimeter for large-scale fire tests and the cone calorimeter for bench-scale fire tests. The cone calorimeter can be used to determine the ignitability as well as heat release rate and smoke development, mass loss rate, combustion gas production etc. from burning materials. Thus, test method using cone calorimeter, an internationally recognized and accepted for the evalua-tion of fire properties, is a very promising tool for combustion study on various kind of materials and products.

• Journal of Radiation Protection and Research
• /
• 제32권4호
• /
• pp.190-193
• /
• 2007

The objective of this study is to recommend the radiation protection design parameters from the shielding point of view for concrete wall between the decay tank room and the primary pump room in TRIGA Mark-II Research Reactor Facility. The shield design for this concrete wall has been performed with the help of Point-kernel Shielding Code Micro-Shield 5.05 and this design was also validated based on the measured dose rate values with Radiation Survey Meter (G-M Counter) considering the ICRP-60 (1990) recommendations for occupational dose rate limit ($10{\mu}Sv/hr$). The recommended shield design parameters are: (i) thickness of 114.3 cm Ilmenite-Magnetite Concrete (IMC) or 129.54 cm Ordinary Reinforced Concrete (ORC) for concrete wall A (ii) thickness of 66.04 cm Ilmenite-Magnetite Concrete (IMC) or 78.74 cm Ordinary Reinforced Concrete (ORC) for concrete wall B and (iii) door thickness of 3.175 cm Mild Steel (MS) on the entrance of decay tank room. In shielding efficiency analysis, the use of I-M concrete in the design of this concrete wall shows that it reduced the dose rate by a factor of at least 3.52 times approximately compared to ordinary reinforced concrete.

• Journal of Information Processing Systems
• /
• 제9권1호
• /
• pp.53-68
• /
• 2013

We investigate the rate-compatible punctured convolutional (RCPC) codes concatenated with hierarchical QAM for designing a cross-layer unequal error protection scheme for H.264 coded sequences. We first divide the H.264 encoded video slices into three priority classes based on their relative importance. We investigate the system constraints and propose an optimization formulation to compute the optimal parameters of the proposed system for the given source significance information. An upper bound to the significance-weighted bit error rate in the proposed system is derived as a function of system parameters, including the code rate and geometry of the constellation. An example is given with design rules for H.264 video communications and 3.5-4 dB PSNR improvement over existing RCPC based techniques for AWGN wireless channels is shown through simulations.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.666-672
• /
• 2024

In the present work, a new brick series based on the Vietnamese white clay minerals from the Bat Trang was fabricated to be applied in the radiation protection applications during the decommissioning of the nuclear power reactors. The bricks were constructed under various pressure rates varied from 7.61 MPa to 114.22 MPa. The influence of pressure rate on the physical and γ-ray shielding properties were investigated in the study. The experimental measurement for the material's density using the MH-300A density meter showed an enhancement in the prepared bricks' density by 22.5 % with increasing the applied pressure rate while the bricks' porosity reduced by 31.2 % when the pressure rate increased from 7.61 MPa to 114.22 MPa. The increase in the fabricated bricks density and the reduction in their porosities enhances the bricks' linear attenuation coefficients as measured by the NaI (Tl) detector along the energy range extended from 0.662 MeV to 1.332 MeV. The linear attenuation coefficient increased by 13.8 %, 17.6 %, 17.0 %, and 17.1 % at gamma ray energies of 0.662 MeV, 1.173 MeV, 1.252 MeV, and 1.332 MeV, respectively. The enhancement in the linear attenuation coefficient increases the bricks' radiation protection efficiency by 10.22 %, 14.48 %, 14.09 %, and 14.26 % at gamma ray energies of 0.662 MeV, 1.173 MeV, 1.252 MeV, and 1.332 MeV, respectively.

• 복식문화연구
• /
• 제24권5호
• /
• pp.577-587
• /
• 2016

Natural dye extracted from Salicornia bigelovii was applied to silk fabrics by dip dyeing process. The dyeing properties and the functionalities of the silk fabrics were determined. Factors affecting the dyeing properties such as dyestuff concentration, temperature, time and pH were studied. The colorimetric parameters $L^*$, $a^*$, $b^*$, and H, V/C values were measured to select the optimal mordanting conditions. The color-fastnesses of the dyed and mordanted fabrics were estimated for practical use; in addition, the antibacterial property, ultraviolet protection properties were evaluated. The dyeabilities of silk increased depending on the increasing dye concentration, dyeing time, and dyeing temperature. And optimum dyeing results were achieved when dyeing with 300% (o.w.f.) of dye concentration at $90^{\circ}C$ for 100 minutes and at pH 3. The dyed silk fabrics without mordants produced yellow (Y) color and showed yellow (Y) or green yellow (GY) colors depending on the mordants type. The light fastness of dyed and Al mordanted silk fabrics were found to be excellent, and the drycleaning and rubbing fastness were good. The dyed silk fabrics showed no antibacterial property, but Al and Cu mordanted silk fabrics showed 99.9% reduction rate. The ultraviolet protection properties of the dyed silk fabric was improved. And the ultraviolet protection properties of mordanted samples showed very good ultraviolet protection properties.

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2118-2126
• /
• 2017

The large-scale power system blackouts have indicated that conventional protection relays that based on local signals cannot fit for modern power grids with complicated setting or heavily loaded-flow transfer. In order to accurately detect various faulted lines and improve the fault-tolerance of wide-area protection, a novel multi-section weighed fault matching and detecting algorithm is proposed. The real protection vector (RPV) and expected section protection vectors (ESPVs) for five fault sections are constructed respectively. The function of multi-section weighed fault matching is established to calculate the section fault matching degrees between RPV and five ESPVs. Then the fault degree of protected line based on five section fault degrees can be obtained. Two fault detecting criterions are given to support the higher accuracy rate of detecting fault. With the enumerating method, the simulation tests illustrate the correctness and fault-tolerance of proposed algorithm. It can reach the target of 100% accuracy rate under 5 bits error of wide-area protections. The influence factors of fault-tolerance are analyzed, which include the choosing of wide-area protections, as well as the topological structures of power grid and fault threshold.

• 방재기술
• /
• 통권14호
• /
• pp.13-17
• /
• 1993

We intended to apprehend the ignitability of the wood, using the ISO test for the ignitability accessment. So we first conducted the ISO test on eight kings of the wood as sample, which came from domestic for-est, and discovered the tendency of the ignitability for the wood in the condition of external factors(its density and the rate of water content, humidity). Finally it was found that the ignition time of the wood was effected by its density and, the rate of water content, the humidity in the atmosphere.

• 방재기술
• /
• 통권24호
• /
• pp.17-22
• /
• 1998

The objective of this paper is to investigate the variation of orifice diameter in a straight pipe which can give equal-sampling rate. This can be utilized for designing orifice in air-sampling smoke detector. The elements which should be considered for designing orifices was presented and the calculation procedure was also given in this paper. The effects of pipe length, the number of orifices, fan pressure was decribed.

• 생태와환경
• /
• 제47권2호
• /
• pp.82-90
• /
• 2014

본 연구에서는 부유토사로 인한 탁도 증가가 어류에게 미치는 영향에 대해 실험실 모의실험을 수행하였다. 국내 강 또는 호소에서 출현 비율이 높은 붕어, 잉어, 송사리를 대상으로 수정란 부화율 평가를 수행한 결과 붕어, 잉어는 4,040 NTU 수준까지 수정란 부화에 미치는 영향이 없었지만, 송사리는 254 NTU 이상의 구간에서 부화율이 저해되는 영향을 보였다. 붕어, 잉어, 송사리 치어의 4일간 노출 결과 생존에 미치는 영향은 없었다. 반면 성장률 결과에서 잉어와 붕어는 7일, 14일, 21일 모두 143 NTU 구간부터 성장저해 영향을 보였다. 송사리는 14일 노출 시 254 NTU, 21일간 노출 시 501 NTU 구간부터 성장저해 영향을 보였다. 따라서 강 또는 호소에서 143 NTU 이상의 탁도가 발생할 경우 붕어, 잉어의 성장을 저해시킬 수 있고, 250 NTU 이상의 탁도는 송사리와 같이 민감 어종의 부화율이 저해될 수 있을 것으로 사료된다.

• The Plant Pathology Journal
• /
• 제33권5호
• /
• pp.467-477
• /
• 2017

A nationwide survey was performed to investigate the current incidence of viral diseases in Korean sweet potatoes for germplasm and growing fields from 2011 to 2014. A total of 83.8% of the germplasm in Korea was infected with viruses in 2011. Commercial cultivars that were used to supply growing fields were infected at a rate of 62.1% in 2012. Among surveyed viruses, the incidence of five Potyvirus species that infect sweet potato decreased between 2012 and 2013, and then increased again in 2014. Representatively, the incidence of Sweet potato feathery mottle virus (SPFMV) was 87.0% in 2012, 20.7% in 2013 and then increased to 35.3% in 2014. Unlike RNA viruses, DNA viruses were shown to decrease continuously. The incidence of Sweet potato leaf curl virus (SPLCV) was 5.5% in 2003, 59.5% in 2011, and 47.4% in 2012. It then decreased continuously year by year to 33.2% in 2013, and then 25.6% in 2014. While the infection rate of each virus species showed a tendency to decline, the virus infection status was more variable in 2013 and 2014. Nevertheless, the high rate of single infections and mixed infection combinations were more variable than the survey results from 2012. As shown in the results from 2013, the most prevalent virus infection was a single infection at 27.6%, with the highest rate of infection belonging to sweet potato symptomless virus-1 (SPSMV-1) (12.9%). Compared to 2013, infection combinations were more varied in 2014, with a total of 122 kinds of mixed infection.