• 복식문화연구
• /
• 제12권1호
• /
• pp.1-11
• /
• 2004

This study was carried out on the process of natural dye substances which can flock ultraviolet rays without producing harmful substances by pollution, germs, etc. While making human body safe in contact, extracting Gardenia, Sappan wood, Radix scutellariae, Cromwell, Mugwort, Gallnut, Lac. Those are used for curing diseases, dyeing silk cloth with those extracts, and examining the color fastness, Ultraviolet protection. From this study, the following conclusion was produced. Brightness was lower in pre-mordanting than in post. And color difference showed that Radix scutellariae was the highest. Aluminum-mordanting showed a higher color difference than Fe. Colorfastness to washing was high in all samples, and the degree of color-changing by washing was the highest in the sample dyed by gardenia, pre-mordanted gallnut showed the highest degree. Colorfastness to perspiration was the highest in gardenia. UV-A test showed that all samples a high rate of 85% or higher compared with test white cloth. Especially, post-mordanted radix scutellariae, pre-mordanted gallnut and post-mordanted sappanwood showed a superior blocking rate.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 추계종합학술대회
• /
• pp.538-542
• /
• 1999

ESD(Electro-Static Discharge) 보호회로용 nMOSFET에 대하여 TCAD 시뮬레이션을 수행하기 위한 새로운 parameter calibration 방법론을 제안하였다. ESD 특성 측정방법의 하나인 TLP (Transmission Line Pulsing)측정을 이용하는 경우, ESD 입력에 대하여 시간변화에 따른 소자의 특성을 파악할 수 있기 때문에 최근 많은 관심을 받고 있다. 본 논문에서는 TLP 측정의 해석방법과 TCAD simulation, 그리고 parameter calibration의 방법론을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.202-204
• /
• 2003

This paper suggests an optimal parameter setting method by use of parametric protectability index, as the objective function. In this paper, a gradient based optimization method is used under the assumption that the initial values of a parameter is in a convex set including the optimal value, which is verified by a plenty of simulation studies. The proposed method is applied to a sample distribution network to shows its effectiveness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.675-676
• /
• 2007

This Paper presents circuit improvement of 345kV Bus bar protection panel by using VDD (Voltage disturbance detection) relay with distinctive ability between human error in the field test and real facility faults. Therefore, We expect that this improvement of circuit helps decrease of blackout coming from human error. In order to guarantee electric power system reliability, consistent study of human error prevention in the event of field test is necessarily required

• 전기학회논문지
• /
• 제68권1호
• /
• pp.215-219
• /
• 2019

Development of DC interruption technology is being studied actively for enhanced DC grid reliability and stability. In this study, coil type superconductor DC circuit breaker was proposed as DC interruption. It is integration technology that combined current-limiting technique using superconductor and cut-off technique using mechanical DC circuit breaker. Superconductor was applied to the coil type. In simulation, Mayr arc model was applied to realize the arc characteristic in the mechanical DC circuit breaker. PSCAD/EMTDC had used to model and perform the simulation. To find out the protection range of coil type superconductor DCCB, the working operation have analyzed based on the rated voltage of DCCB. The results confirmed that, according to apply the limiting device, the protection range was increased in twice. Therefore, the probability of failure of interruption has lowered significantly.

• 조명전기설비학회논문지
• /
• 제23권7호
• /
• pp.20-28
• /
• 2009

This paper presents the design of zero current switching ZCS pulse frequency modulation type DC-DC converter for magnetron power supply. A magnetron serving as the microwave source in a microwave oven is driven by a switch mode power supply (SMPS). SMPSs have the advantages of improved efficiency, reduced size and weight, regulation and the ability to operate directly from the converter DC bus. The demands of the load system and the design of the power supply required to produce constant power at 4[kV]. A magnetron power supply requires the ability to limit the load current under short circuit conditions. The current source series resonant converter is a circuit configuration which can achieve this. The main features of the proposed converter are an inherent protection against a short circuit at the output, a high voltage gain and zero current switching over a large range of output power. These characteristics make it a viable choice for the implementation of a high voltage magnetron power supply.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.669-672
• /
• 2001

Generally, previous converter is divided into two categories to get high power factor and good output regulation. These two categories can be combined a category with a main switch. These converter is called Single Stage PFC Converter. This approach has good electrical characteristics of high power factor and fast output voltage regulation. The cost and size are important factor to design the converter in low power system. Even single stage can reduce the size and cost, but this approach needs to have additional circuit like control, PWM circuit. To improve these demerits, Top switch is one of good choice In reduce and size in low power single stage converter. Because it has the ability of current limit, thermal protection, oscillator, control circuit as well as a main switch ability.

• Journal of Electrical Engineering and Technology
• /
• 제1권2호
• /
• pp.137-144
• /
• 2006

This paper proposes novel protection schemes for grid-connected distributed generation (DG) units using the fault location algorithm. The grid-connected DG would be influenced by abnormal distribution line conditions. Identification of the fault location for the distribution lines at the relaying point of DG helps solve the problems of the protection relays for DG. The proposed scheme first identifies fault locations using currents and voltages measured at DG and source impedance of distribution networks. Then the actual faulted feeder is identified, applying time-current characteristic curves (TCC) of overcurrent relay (OCR). The method considering the fault location and TCC of OCR might improve the performance of the conventional relays for DG. Test results show that the method prevents the superfluous operations of protection devices by discriminating the faulted feeder, whether it is a distribution line where DG is integrated or out of the line emanated from the substation to which the DGs are connected.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.193-195
• /
• 2002

In this paper, a communication module is proposed to be applied to communication between over current relay (OCR) agents in multi agent protection system. A multi agent system can achieve a global goal beyond the ability of each individual agent by working together, in which it is the prerequisite for each agent to be able to exchange or share information or processing status with other agent. The proposed communication module is purposed to enable not only each agent to bring about its own goal, but also the whole protective system to provide much improved coordinated protection. It is applied to a self adaptive protection system for a distribution network using multi agent concept to show its effectiveness.

• The Plant Pathology Journal
• /
• 제28권1호
• /
• pp.1-9
• /
• 2012

In this study, 200 isolates of fluorescent pseudomonads were isolated from different fields of East and West Azarbaijan and Ardebil provinces of Iran. These bacterial isolates were screened on the basis of a dual culture assay, the presence of known antibiotic genes, and their ability to successfully colonize roots and to promote plant growth. Twelve isolates exhibited 30% or more inhibition of mycelia growth of $P.$ $drechsleri$. Genes encoding production of the antibiotics 2,4-diacetylphloroglucinol, phenazine-1-carboxylic acid, and pyoluteorin were detected in some strains but none of the strains possessed the coding gene for production of antibiotic pyrrolnitrin. In an $in$ $vitro$ test for root colonization, the population density on roots of plants treated with most of the above strains was more than 6 $\log_{10}$ CFU $g^{-1}$ roots, with a maximum of 7.99 $\log_{10}$ CFU $g^{-1}$ roots for strain 58A. Most of the strains promoted significant plant growth in comparison to non-treated controls. In green house studies, the percentage of healthy plants in pots treated with strains 58A and 8B was 90.8% and 88.7%, respectively. The difference between these treatments and treatment with the fungicide metalaxyl was not significant.