• 제목/요약/키워드: proportional sampling

검색결과 194건 처리시간 0.039초

A composite estimator for stratified two stage cluster sampling

  • Lee, Sang Eun;Lee, Pu Reum;Shin, Key-Il
    • Communications for Statistical Applications and Methods
    • /
    • 제23권1호
    • /
    • pp.47-55
    • /
    • 2016
  • Stratified cluster sampling has been widely used for effective parameter estimations due to reductions in time and cost. The probability proportional to size (PPS) sampling method is used when the number of cluster element are significantly different. However, simple random sampling (SRS) is commonly used for simplicity if the number of cluster elements are almost the same. Also it is known that the ratio estimator produces a good performance when the total number of population elements is known. However, the two stage cluster estimator should be used if the total number of elements in population is neither known nor accurate. In this study we suggest a composite estimator by combining the ratio estimator and the two stage cluster estimator to obtain a better estimate under a certain population circumstance. Simulation studies are conducted to compare the superiority of the suggested estimator with two other estimators.

다중 레이저 선을 이용한 비전 센서를 통한 고속 용접선 추적 시스템 (High speed seam tracking system using vision sensor with multi-line laser)

  • 성기은;이세헌
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2002년도 춘계학술발표대회 개요집
    • /
    • pp.49-52
    • /
    • 2002
  • A vision sensor measure range data using laser light source, This sensor generally use patterned laser which shaped single line. But this vision sensor cannot satisfy new trend which needs faster and more precise processing. The sensor's sampling rate increases as reduced image processing time. However, the sampling rate can not over 30fps, because a camera has mechanical sampling limit. If we use multi line laser pattern, we will measure multi range data in one image. In the case of using same sampling rate camera, number of 2D range data profile in one second is directly proportional to laser line's number. For example, the vision sensor using 5 laser lines can sample 150 profiles per second in best condition.

  • PDF

멀티 라인 레이저 비전 센서를 이용한 고속 용접선 추적 기술 (High speed seam tracking using multi-line laser vision sensor)

  • 성기은;이세헌
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 추계학술대회 논문집
    • /
    • pp.584-587
    • /
    • 2002
  • A vision sensor measure range data using laser light source. This sensor generally use patterned laser which shaped single line. But this vision sensor cannot satisfy new trend which needs laster and more precise processing. The sensor's sampling rate increases as reduced image processing time. However, the sampling rate can not over 30fps, because a camera has mechanical sampling limit. If we use multi line laser pattern, we will measure multi range data in one image. In the case of using same sampling rate camera, number of 2D range data profile in one second is directly proportional to laser line's number. For example, the vision sensor using 5 laser lines can sample 150 profiles per second in best condition.

  • PDF

층화 집락 반복계통 무관질문모형에 관한 연구 (A Study on the Stratified Cluster Replicated Systematic Unrelated Question Model)

  • 이기성
    • 응용통계연구
    • /
    • 제26권2호
    • /
    • pp.209-222
    • /
    • 2013
  • 본 논문에서는 대규모 표본조사에서 많이 나타나는 모집단이 층으로 형성되어 있고, 각 층들이 집락으로 구성되어 있을 때 사용 가능한 층화 집락추출법을 얻고자 하는 정보가 민감할 때 반복계통 무관질문모형에 적용하였다. 먼저 모집단이 집락으로 구성되어 있고, 추출된 집락으로부터 계통표본을 반복적으로 추출하여 민감한 정보를 얻는 데 무관질문모형을 사용한 집락 반복계통 무관질문모형을 제안하였다. 다음으로 제안한 모형을 층화된 모집단에서도 사용할 수 있도록 층화집락 반복계통추출법에 의한 무관질문모형으로 발전시켰으며, 각 층의 집락을 확률비례복원추출 또는 확률비례비복원추출하는 층화 확률비례 반복계통 무관질문모형을 제안하였다. 또한 제안한 층화집락 반복계통 추출법에 의한 무관질문모형에서 각 층의 표본배분하는 문제를 비례배분과 최적배분 측면에서 다루었다. 마지막으로 제안한 층화집락 반복계통추출법에 의한 무관질문모형과 집락 반복계통추출법에 의한 무관질문모형과의 효율성을 비교하였다.

국민영양조사(國民營養調査)를 위한 표본설계(標本設計) 소고(小考) (A Sample Design for National Nutrition Servey)

  • 전태윤;정기혜
    • Journal of Nutrition and Health
    • /
    • 제17권3호
    • /
    • pp.236-241
    • /
    • 1984
  • In order to make clear the relationship between sample design and sample survey in community, it was conducted research on sample design for National Nutrition Survey in 1983. In this paper it was tried to analize the data based on The Report of a Settled Population, 1981 conducted by National Bureau of Statistics Economic Planning Board. The sample was basically using stratified two-stage sampling with systematic sampling of Ban or Li as administrative unit. The population represents the whole nation excluding Jeju-do because of budget. The selection of sampling unit and sampling procedure was as follows. 1) Stratify the nation-wide area in 20 sections according to administrative districts. 2) Determine the sample size in each section according to equal proportional rate (1 / 8040) and to about 1,000 households in the sample. 3) Select the 25 sampling units by section according to households proportion. 4) Select the 10 households at random from each Ban or Li according to equal probability proportion as the final sampling unit. Using the procedure, it was sampled 1,000 households for National Nutrition Survey in 1983.

  • PDF

부분적 레이더 정보에 따른 면적평균강우의 관측오차 (Sampling Error of Areal Average Rainfall due to Radar Partial Coverage)

  • 유철상;김병수;김경준;윤정수
    • 한국방재학회:학술대회논문집
    • /
    • 한국방재학회 2008년도 정기총회 및 학술발표대회
    • /
    • pp.97-100
    • /
    • 2008
  • This study estimated the error involved in the areal average rainfall derived incomplete radar information due to radar partial coverage of a basin or sub-basin. This study considers the Han River Basin as an application example for the rainfall observation using the Ganghwa rain radar. Among the total of 24 mid-sized sub-basins of the Han River Basin evaluated in this study, only five sub-basins are fully covered by the radar and three are totally uncovered. Remaining 16 sub-basins are partially covered by the radar leading incomplete radar information available. When only partial radar information is available, the sampling error decreases proportional to the size of the radar coverage, which also varies depending on the number of clusters. It is general that smaller sampling error can be expected when the number of clusters increases if the total area coverage remains the same. This study estimated the sampling error of the areal average rainfall of partially-covered mid-sized sub-basins of the Han River Basin, and the results show that the sampling error could be at least several % to maximum tens % depending on the relative coverage area.

  • PDF

예비교사들의 통계적 표집에 대한 이해 (Pre-service Teachers' Understanding of Statistical Sampling)

  • 고은성;이경화
    • 대한수학교육학회지:수학교육학연구
    • /
    • 제21권1호
    • /
    • pp.17-32
    • /
    • 2011
  • 본 연구에서는 예비교사들의 통계적 표집에 대한 이해를 조사하였다. 먼저 선행 연구를 바탕으로 표집의 이해와 관련된 주요 주제를 표본의 대표성, 표집 변이성, 표집분포로 구분하고, 각각의 주요 주제에 대한 세부 개념 요소들을 선정하였다. 이에 대한 예비교사들의 이해를 조사한 결과 대부분의 예비교사들이 편의를 일으키지 않는 무작위 추출이 표집방법으로 적절함을 이해하고 있었으나 약 64%의 예비교사들만이 표본을 모집단의 준비례적 축소버전으로 인식하고 있었다. 표집에서 표본이 모집단에서 차지하는 비율보다 표본의 크기 자체가 중요함을 인식하는 예비교사는 극소수에 불과했으며, 조사 대상의 절반에 해당하는 예비교사들만이 신뢰할 수 있는 결과를 도출하기 위해 전체 표본의 크기가 아니라 표집 횟수가 중요함을 인식하였다. 그리고 표집분포는 모집단 분포의 형태와 무관하게 모집단의 평균을 중심으로 대칭적인 형태를 나타낸다는 것을 이해하는 예비교사는 매우 적었다.

  • PDF

부품.소재산업 동향 조사의 표본설계 (Sample Design for Materials and Components Industry Trend Survey)

  • 남궁평
    • Communications for Statistical Applications and Methods
    • /
    • 제15권6호
    • /
    • pp.883-897
    • /
    • 2008
  • 2006년 통계청이 시행한 광업 제조업 통계조사 결과(2005년 실적치)를 모집단으로 사용하면 최근 동향을 반영한 표본설계가 가능하다. 본 논문은 기존의 12개 업종보다 세분화된 94개 세부업종에 분류에 따라 매월 부품 소재산업의 생산, 출하, 재고의 변동사항을 조사하여 부품 소재산업의 경기변동실태를 파악하고 부품 소재산업의 육성정책 및 기업경영의 기초자료를 제공할 수 있는 새로운 표본설계를 제안한다. 표본설계는 응용절사법과 주성분을 이용한 다변량 네이만 배정법을 이용하여 층별로 표본크기를 결정하여 배정하고 표본추출은 확률비례계통추출을 사용한다.

층화이중추출법에 의한 양적속성의 무관질문모형 (Unrelated question model with quantitative attribute by stratified double sampling)

  • 이기성;홍기학
    • 응용통계연구
    • /
    • 제8권1호
    • /
    • pp.27-38
    • /
    • 1995
  • 본 논문에서는 사회적으로나 개인적으로 매우 민감한 조사에서 모집단이 양적속성을 갖는 여러 개의 층으로 구성되어 있을 때, 층의 크기를 모르는 경우 층화표본을 위하여 이중추출법을 이용하는 층화이중추출법에 의한 양적속성의 무관질문모형을 제안하였다. 그리고, 층화이중추출에 있어서 각 층의 표본배분에 관해 비례배분, 최적배분으로 나누어 각 층의 크기를 알고 있는 경우에 층화추출법에 의한 양적속성의 무관 질문모형과 그 효율성을 비교하였다.

  • PDF

임목재적(林木材積) 산정(算定)을 위(爲)한 Simple Random Sampling과 Two-stage P.P.S. Sampling 방법(方法)의 비교(比較) (Comparison of Simple Random Sampling and Two-stage P.P.S. Sampling Methods for Timber Volume Estimation)

  • 김재수
    • 한국산림과학회지
    • /
    • 제65권1호
    • /
    • pp.68-73
    • /
    • 1984
  • Simple random sampling과 P.P.S. sampling의 효율을 비교하기 위하여 오스트리아 Salzburg 부근의 침엽수 장령림 임분에서 임목조사를 실시하였다. 축적 1:10,000의 흑백 적외선 사진을 판독하여, 조사 임지를 제지, 유령림, 너도 밤나무 장령림, 침엽수 장령림으로 구분하고, 침엽수 장령림 내에서 random sampling에 의한 99개의 표본점과 P.P.S. sampling에 의한 75개의 표본점을 흉고 단면적 제수 4인 Relascope에 의하여 야외 조사한 자료를 비교한 결과는 다음과 같다. 1) random sampling에 의한 임분 재적의 추정치는 $422.0m^3/ha$이었고, P.P.S. sampling에 의해서는 $433.5m^3/ha$이었으나 이들간의 통계적 유의성은 없었다. 2) 5 %의 허용 오차내에서는 P.P.S. sampling에 의하여는 170점, random sampling에 의하여는 237점이 필요하였다. 3) P.P.S. sampling은 random sampling에 비하여 야외 조사 시간을 17% 감소시킬 수 있었다.

  • PDF