• 동아시아식생활학회지
• /
• 제14권2호
• /
• pp.135-144
• /
• 2004

A total of 40 Korean and Japanese rice varieties were evaluated for their main chemical components, physical properties, cooking quality, pasting properties, and instrumental measurements. Based on their quality evaluations, it was concluded that Korean and Japanese rice varieties were not significantly different in the basic components of NIR (Near Infra Red) data and the chemical analysis from the uncooked brown and milled rices. Korean rice had a little bit higher protein and amylose contents but much lower fat acidity than those of Japanese rice from the chemical analysis. From all the data of three different kinds of NIR methods, Korean and Japanese milled rice were very similar except the taste score. Japanese rice showed a slightly higher taste score, a little bit higher lightness and whiteness, but lower yellowness and redness than Korean one. From all those data of NIR and the chemical analysis, Korean and Japanese rices had very similar components except the fat content.

• Steel and Composite Structures
• /
• 제2권4호
• /
• pp.247-258
• /
• 2002

The high-temperature material properties of steel are very important to the fire resistance analysis of high-strength bolt connections. This paper reports on the results of the experimental studies on the high-temperature properties of 20 MnTiB steel which is widely used in high-strength bolts, and the friction coefficient of 16Mn steel plates at elevated temperature which is a necessary parameter for bolted frictional connection analysis. The test data includes yield strength, limit strength, modulus of elasticity, elongation and expansion coefficient of 20MnTiB steel at elevated temperature, and the friction coefficients between two 16Mn steel plates under elevated temperatures and after cooling. Based on the data from the tests, the mathematical models for predicting the mechanical properties of 20MnTiB steel and friction coefficients of 16Mn steel plates have been established.

• Journal of the Korean Wood Science and Technology
• /
• 제44권4호
• /
• pp.505-514
• /
• 2016

To study mechanical properties of fiberglass reinforced wood-based composite (FRWC), fiberglass with a diameter of $20{\mu}m$ was selected to prepare test specimens. Mechanical properties of fiberglass reinforced wood-based composite were determined by three-point-bending test while its microstructure was characterizes by scanning electron microscopy (SEM). The results showed that mechanical properties of fiberglass reinforced wood-based composite were superior to that of the wood fiberboard based on the contrasting mechanical curves and the analysis of fracture mechanism. It is believed that the material design with this "sandwich" structure brings a unique buffering capacity of fiberglass into play in the composites. So the specimen did not produce a sudden fracture failure at high level of applied loads because it had a bearing ability. The SEM analysis showed that the working strength of PVAc adhesive was high; under a bearing force, it could properly transfer a load. In addition, glass fiber mesh and wood fiber board combined well.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.313-313
• /
• 2012

ZnO and $SnO_2$, well-known wide direct band-gap semiconductors, have been considered as the most promising functional materials due to their highly sensitive gas sensing and excellent optical properties. ZnO/$SnO_2$ epitaxial hetrostructure exhibited unique luminescence properties in contrast with individual tetra-pod ZnO and $SnO_2$ nanostructures. Polycrystalline $SnO_2$-based samples $Zn_xSn_{1-x}O_2$(x=0, 0.01, 0.03, 0.05) were prepared by solid state reaction and eco-friendly hydrothermal techniques. Scanning electron microscopy equipped with electron dispersive x-ray spectra confirms the formation of near stoichiometric $Zn_xSn_{1-x}O_2$ nanorods of diameter ~10 nm. X-ray diffraction analysis revealed the rutile structure, except for x=0.07, which may have a small part of $Zn_2SnO_4$ as a secondary phase.

• Horticulture, Environment, and Biotechnology : HEB
• /
• 제59권6호
• /
• pp.919-927
• /
• 2018

To compare the antioxidant properties and flavonols in various parts; dry skin (DS) and edible portion (EP), of 8 red onions (Allium cepa L, ROs), total content of phenolics (TPC), flavonoids (TFC), and anthocyanins (TAC) and DPPH radical scavenging properties were estimated and the content of six flavonols were quantified by HPLC-PDA analysis. The major component of DS and EP of RO was quercetin and quercetin-4'-glucoside, respectively. Score plots of the PCA and PLS-DA were segregated by flavonols content and antioxidant properties according to the EP and DS of ROs. Loading plot of the PCA showed that the quercetin and sum of flavonol content were highly correlated with antioxidant activity of ROs. Therefore, flavonol content and antioxidant activity can be used as markers for distinct parts of ROs.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.824-829
• /
• 2007

Mechanical and thermal analysis properties of carbon fiber/epoxy composite for train carbody were evaluated by varying with environmental factors such as ultraviolet, temperature, and moisture. Accelerated environmental aging tester was utilized for this study. Testing temperature was set to $80^{\circ}C$ and ultraviolet was obtained through xenon-arc lamp. To consider moisture, water sprayed on specimen for 18 minutes every 2 hour. All the specimens were made of CF1263/Epoxy composite. Mechanical properties such as tensile, bending, and shear properties were evaluated through a material testing system. Also, thermal analysis properties such as storage shear modulus, loss shear modulus, and tan ${\delta}$ were measured through dynamic mechanical analyzer. Finally surfaces of the composite exposed to environmental factors were examined using a scanning electron microscope. From experimental results, those properties of CF1263/Epoxy composite were shown to be slightly decreased due to environmental factors.

• 대한기계학회논문집B
• /
• 제27권3호
• /
• pp.374-380
• /
• 2003

This paper proposes dimensionless correlations predicting properties of the frost layer formed on a cold flat surface. Experiments are carried out to obtain the correlations with various environmental parameters such as air temperature, air velocity, absolute humidity, and cooling plate temperature. As a result, the frost properties (frost layer thickness, density, surface temperature, thermal conductivity) are correlated as a function of Reynolds number, Fourier number, absolute humidity and non-dimensional temperature by using a dimensional analysis. The correlations agree well with the previous and our experimental data within a maximum error of 10%, and are used to predict the frost properties in the following ranges: Reynolds number of 20216 to 53763, Fourier number of 0.1962 to 2.5128, absolute humidity of 3.22 to 8.47, and non-dimensional temperature of 0.125 to 0.5.

• 한국의류학회지
• /
• 제26권6호
• /
• pp.865-876
• /
• 2002

The purpose of the study is to clarify yellow image and formative properties in modern fashion. For the study of formative properties 230 kinds of costume samples being visual power in yellow have been selected from photographs in fashion magazines and divided into tones: vivid(S, B, Dp), vague(L, Lgr, D), bright(Vp, P, B). For the study of image 30 kinds of costume samples is used. The Study was measured by using Semantic Differential method. The subjects were 50 students majoring in clothing and textile. The data were analyzed by factor analysis, ANOVA, MDS and regression analysis. The results of analysis are as follow: 1. Factor analysis has extracted 4 factors of yellow image in the fashion. These factor are Attractiveness, Cheerfulness, Hardness and Softness, Gorgeousness. 2. There were significant difference in visual evaluation of yellow tones. 3. Evaluative dimensions of yellow was classified as Soft-Hard, Gorgeous-Unpretentious. 4. The mage effect on Preference, Buying needs, Pleasant and Riches was consist of complicated sensibility.

• 폴리머
• /
• 제39권2호
• /
• pp.200-209
• /
• 2015

In this study, the influence of dilauroyl peroxide on mechanical and thermal properties of different polypropylene (PP) matrices was investigated. Polypropylene matrices, different molecular weight isotactic PP containing 0.01, 0.02, 0.04, 0.06, 0.08, and 0.1 wt% of dilauroyl peroxide (DLP) were prepared by using a single-screw extruder. The effect of the visbreaking agent (DLP) on mechanical, physical, thermal and morphological properties of different molecular weight PP had been studied. Mechanical properties (tensile strength at break point, at yield and elongation at break point), melt flow index (MFI), scanning electron microscope (SEM) and differential scanning calorimetric (DSC) analyses of these matrices were examined. Melting ($T_m$) and crystallization ($T_c$) temperatures, crystallinity ratio (%) and enthalpies were determined. The microstructure of isotactic polypropylene matrix was investigated by scanning electron microscopy (SEM). From SEM analysis, it was observed that the surface disorder increased by the increasing amount of DLP. As a result of DSC analyses, the crystallinity ratio of the PP matrices has varied between 1.64-7.27%. Mechanical properties of the matrices have been improved. Particularly, the mechanical tests of PP have given interesting results when compounded with 0.06-0.08 wt% dilauroyl peroxide (DLP). Mechanical properties and thermal decomposition processes were all changed by increasing the amount of DLP in the matrix structure.

• 펄프종이기술
• /
• 제41권1호
• /
• pp.30-36
• /
• 2009

Cracking of scored or creased lines on boards is a serious problem in converting process of corrugated fiberboard. It is important to reduce the possibility of score crack in advance by controlling the related quality factors of linerboard. To find out the key properties affecting score crack, we carried out the correlation analysis between score crack and physical properties of linerboards. Score crack was evaluated by visual rating on surface crack after folding a linerboard using laboratory folding resistance tester. Thickness of linerboard was the most important factor to score crack. The critical limits of thickness and strain can be determined by correlation analysis for reducing the possibility of score crack.